⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 lpc.h

📁 大名鼎鼎的CE下播放软件,TCPPMP的源代码!!!2410下可以流畅的解QVGA的H264,MPEG4等格式.
💻 H
字号:
/* libFLAC - Free Lossless Audio Codec library * Copyright (C) 2000,2001,2002,2003,2004,2005  Josh Coalson * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * - Neither the name of the Xiph.org Foundation nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */#ifndef FLAC__PRIVATE__LPC_H#define FLAC__PRIVATE__LPC_H#ifdef HAVE_CONFIG_H#include <config.h>#endif#include "private/float.h"#include "FLAC/format.h"#ifndef FLAC__INTEGER_ONLY_LIBRARY/* *	FLAC__lpc_compute_autocorrelation() *	-------------------------------------------------------------------- *	Compute the autocorrelation for lags between 0 and lag-1. *	Assumes data[] outside of [0,data_len-1] == 0. *	Asserts that lag > 0. * *	IN data[0,data_len-1] *	IN data_len *	IN 0 < lag <= data_len *	OUT autoc[0,lag-1] */void FLAC__lpc_compute_autocorrelation(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_compute_autocorrelation_asm_ia32(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_4(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_8(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_sse_lag_12(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);void FLAC__lpc_compute_autocorrelation_asm_ia32_3dnow(const FLAC__real data[], unsigned data_len, unsigned lag, FLAC__real autoc[]);#    endif#  endif#endif/* *	FLAC__lpc_compute_lp_coefficients() *	-------------------------------------------------------------------- *	Computes LP coefficients for orders 1..max_order. *	Do not call if autoc[0] == 0.0.  This means the signal is zero *	and there is no point in calculating a predictor. * *	IN autoc[0,max_order]                      autocorrelation values *	IN 0 < max_order <= FLAC__MAX_LPC_ORDER    max LP order to compute *	OUT lp_coeff[0,max_order-1][0,max_order-1] LP coefficients for each order *	*** IMPORTANT: *	*** lp_coeff[0,max_order-1][max_order,FLAC__MAX_LPC_ORDER-1] are untouched *	OUT error[0,max_order-1]                   error for each order * *	Example: if max_order is 9, the LP coefficients for order 9 will be *	         in lp_coeff[8][0,8], the LP coefficients for order 8 will be *			 in lp_coeff[7][0,7], etc. */void FLAC__lpc_compute_lp_coefficients(const FLAC__real autoc[], unsigned max_order, FLAC__real lp_coeff[][FLAC__MAX_LPC_ORDER], FLAC__double error[]);/* *	FLAC__lpc_quantize_coefficients() *	-------------------------------------------------------------------- *	Quantizes the LP coefficients.  NOTE: precision + bits_per_sample *	must be less than 32 (sizeof(FLAC__int32)*8). * *	IN lp_coeff[0,order-1]    LP coefficients *	IN order                  LP order *	IN FLAC__MIN_QLP_COEFF_PRECISION < precision *	                          desired precision (in bits, including sign *	                          bit) of largest coefficient *	OUT qlp_coeff[0,order-1]  quantized coefficients *	OUT shift                 # of bits to shift right to get approximated *	                          LP coefficients.  NOTE: could be negative. *	RETURN 0 => quantization OK *	       1 => coefficients require too much shifting for *shift to *              fit in the LPC subframe header.  'shift' is unset. *         2 => coefficients are all zero, which is bad.  'shift' is *              unset. */int FLAC__lpc_quantize_coefficients(const FLAC__real lp_coeff[], unsigned order, unsigned precision, FLAC__int32 qlp_coeff[], int *shift);/* *	FLAC__lpc_compute_residual_from_qlp_coefficients() *	-------------------------------------------------------------------- *	Compute the residual signal obtained from sutracting the predicted *	signal from the original. * *	IN data[-order,data_len-1] original signal (NOTE THE INDICES!) *	IN data_len                length of original signal *	IN qlp_coeff[0,order-1]    quantized LP coefficients *	IN order > 0               LP order *	IN lp_quantization         quantization of LP coefficients in bits *	OUT residual[0,data_len-1] residual signal */void FLAC__lpc_compute_residual_from_qlp_coefficients(const FLAC__int32 *data, unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_wide(const FLAC__int32 *data, unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 residual[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_compute_residual_from_qlp_coefficients_asm_ia32(const FLAC__int32 *data, unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 residual[]);void FLAC__lpc_compute_residual_from_qlp_coefficients_asm_ia32_mmx(const FLAC__int32 *data, unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 residual[]);#    endif#  endif#endif#endif /* !defined FLAC__INTEGER_ONLY_LIBRARY *//* *	FLAC__lpc_restore_signal() *	-------------------------------------------------------------------- *	Restore the original signal by summing the residual and the *	predictor. * *	IN residual[0,data_len-1]  residual signal *	IN data_len                length of original signal *	IN qlp_coeff[0,order-1]    quantized LP coefficients *	IN order > 0               LP order *	IN lp_quantization         quantization of LP coefficients in bits *	*** IMPORTANT: the caller must pass in the historical samples: *	IN  data[-order,-1]        previously-reconstructed historical samples *	OUT data[0,data_len-1]     original signal */void FLAC__lpc_restore_signal(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_wide(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);#ifndef FLAC__NO_ASM#  ifdef FLAC__CPU_IA32#    ifdef FLAC__HAS_NASMvoid FLAC__lpc_restore_signal_asm_ia32(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_asm_ia32_mmx(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);#    endif /* FLAC__HAS_NASM */#  elif defined FLAC__CPU_PPCvoid FLAC__lpc_restore_signal_asm_ppc_altivec_16(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);void FLAC__lpc_restore_signal_asm_ppc_altivec_16_order8(const FLAC__int32 residual[], unsigned data_len, const FLAC__int32 qlp_coeff[], unsigned order, int lp_quantization, FLAC__int32 data[]);#  endif/* FLAC__CPU_IA32 || FLAC__CPU_PPC */#endif /* FLAC__NO_ASM */#ifndef FLAC__INTEGER_ONLY_LIBRARY/* *	FLAC__lpc_compute_expected_bits_per_residual_sample() *	-------------------------------------------------------------------- *	Compute the expected number of bits per residual signal sample *	based on the LP error (which is related to the residual variance). * *	IN lpc_error >= 0.0   error returned from calculating LP coefficients *	IN total_samples > 0  # of samples in residual signal *	RETURN                expected bits per sample */FLAC__double FLAC__lpc_compute_expected_bits_per_residual_sample(FLAC__double lpc_error, unsigned total_samples);FLAC__double FLAC__lpc_compute_expected_bits_per_residual_sample_with_error_scale(FLAC__double lpc_error, FLAC__double error_scale);/* *	FLAC__lpc_compute_best_order() *	-------------------------------------------------------------------- *	Compute the best order from the array of signal errors returned *	during coefficient computation. * *	IN lpc_error[0,max_order-1] >= 0.0  error returned from calculating LP coefficients *	IN max_order > 0                    max LP order *	IN total_samples > 0                # of samples in residual signal *	IN bits_per_signal_sample           # of bits per sample in the original signal *	RETURN [1,max_order]                best order */unsigned FLAC__lpc_compute_best_order(const FLAC__double lpc_error[], unsigned max_order, unsigned total_samples, unsigned bits_per_signal_sample);#endif /* !defined FLAC__INTEGER_ONLY_LIBRARY */#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -