eg2.fit.qmsg

FPGA开发光盘各章节实例的设计工程与源码

{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_IO_MAC_RAM_PACKING" "" "Extra Info: Finished moving registers into LUTs, I/O cells, DSP blocks, and RAM blocks" {  } {  } 1 0 "Finished moving registers into LUTs, I/O cells, DSP blocks, and RAM blocks" 1 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "5 unused 3.30 4 1 0 " "Info: Number of I/O pins in group: 5 (unused VREF, 3.30 VCCIO, 4 input, 1 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 0 48 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 48 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 0 52 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  52 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 1 54 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 1 total pin(s) used --  54 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use unused 0 48 " "Info: I/O bank number 5 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use unused 0 48 " "Info: I/O bank number 6 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use unused 0 55 " "Info: I/O bank number 7 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  55 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use unused 0 52 " "Info: I/O bank number 8 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  52 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "9 does not use unused 0 6 " "Info: I/O bank number 9 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "10 does not use unused 0 4 " "Info: I/O bank number 10 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  4 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "11 does not use unused 0 6 " "Info: I/O bank number 11 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "12 does not use unused 0 4 " "Info: I/O bank number 12 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  4 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X32_Y0 X42_Y9 " "Info: The peak interconnect region extends from location X32_Y0 to location X42_Y9" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "carryout GND " "Info: Pin carryout has GND driving its datain port" {  } { { "eg2.vhd" "" { Text "F:/复件 tijiao/程序及软件/cht04/eg2_rtl/eg2.vhd" 9 -1 0 } } { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "" { carryout } "NODE_NAME" } } { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "" { carryout } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "208 " "Info: Allocated 208 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Sun Feb 18 12:36:32 2007 " "Info: Processing ended: Sun Feb 18 12:36:32 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Info: Elapsed time: 00:00:11" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "F:/复件 tijiao/程序及软件/cht04/eg2_rtl/eg2.fit.smsg " "Info: Generated suppressed messages file F:/复件 tijiao/程序及软件/cht04/eg2_rtl/eg2.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}