zy.txt

ttermpro：一个非常不错的TELNET 仿真软件。

list devices
 Bus:Dev.Fn Vendor Device Rev  Class I/F  Description
---------------------------------------------------------------
  00:05.0   121B   436C   01   06-00 00   Host Bridge
  00:05.1   121B   436C   01   06-00 00   Host Bridge
  00:06.0   1260   3890   01   02-80 00   Network Controller
  00:07.0   1106   3038   61   0c-03 00   USB Controller
  00:07.1   1106   3038   61   0c-03 00   USB Controller
  00:07.2   1106   3104   63   0c-03 20   USB Controller

Quantum pci> show device 
Device not found
  show device [<bus>:]<dev>[.<fn>]
                           - Show device Config space
Quantum pci> show device 0:  00:07: .0
Bus 00 Device 07 Function 0:   USB Controller
VendorID: 1106  DeviceID: 3038  Command: 0005  Status:  0210
Class:      0C  SubClass:   03  Interface: 00  Revision:  61
BIST:       00  Header:     80  Latency:   16  CacheLine: 00
MaxLat:     00  MinGnt:     00  IntPin : INTA  IntLine:   00
Subsystem VendorID: 1106        CardBus CIS : N/A
Subsystem DeviceID: 3038        ExpansionROM: N/A
Base Address 4  [0000fce1]: I/O at fce0
Capability List [80]:
[80]: NextPtr:00  CapID:01 Power Management
      PM Caps:FFC2 Ver:2 IAux:375mA  D1 D2  PME: D0 D1 D2 D3hot D3cold
      PM Ctrl:0000 State:D0 PME:  
Quantum pci> help
PCI Library commands:
ib              ih              iw              ob              oh             
ow              rb              rh              rw              wb             
wh              ww              crb             crh             crw            
cwb             cwh             cww             show tree       list devices   
show device     show resources  regs            cfg0            cfg1           
frb             frh             frw             fwb             fwh            
fww             info            version         help            
Quantum pci> show resources
00:05.0 BAR0: Memory at 0xD0000000 - 0xD00FFFFF  length=0x100000
00:05.0 BAR1: I/O at 0x1000 - 0x11FF length 0x200
00:05.1 BAR0: Memory at 0xD0100000 - 0xD010FFFF  length=0x10000
00:05.1 BAR1: I/O at 0x1200 - 0x13FF length 0x200
00:06.0 IRQ : Pin INTA
00:06.0 BAR0: Memory at 0xD0110000 - 0xD0111FFF  length=0x2000
00:07.0 IRQ : Pin INTA
00:07.0 BAR4: I/O at 0xFCE0 - 0xFCFF length 0x20
00:07.1 IRQ : Pin INTB
00:07.1 BAR4: I/O at 0xFCE0 - 0xFCFF length 0x20
00:07.2 IRQ : Pin INTC
00:07.2 BAR0: Memory at 0xD0112000 - 0xD01120FF  length=0x100
Quantum pci> help
PCI Library commands:
ib              ih              iw              ob              oh             
ow              rb              rh              rw              wb             
wh              ww              crb             crh             crw            
cwb             cwh             cww             show tree       list devices   
show device     show resources  regs            cfg0            cfg1           
frb             frh             frw             fwb             fwh            
fww             info            version         help            
Quantum pci> regs
 NP Int:None   Int  PciErr RdPost RdBusy RdDone WrBusy WrDone Mail0 Mail1
--------------------------------------------------------------------------
MICR Enables:  ---- ......               ......        ...... .. ne .. ne
MICR[00000000] .... ...... ...... ...... ...... ...... ...... ..... .....
ISR [00000000] .... ...... ...... ...... ...... ...... ...... ..... .....

                Svc  Lvl  RdPost RdBusy RdDone WrBusy WrDone Mail0 Mail1  
--------------------------------------------------------------------------
MSCWR[00000000] .... --   ...... ...... ...... Done:..........
MSCRR[00000000] .... --   Busy:....... Done:.........
MSCMR[00000000] .... Svc:-- Mail0[ne].... Mail1[ne].... Err:..... PM:.....
PBECR[80000019] Err Busy:....... Cancel:.... AutoDma[....] Dis Cfg:PCI Arbiter:O
n  ...

Mail0[00000000]. Arm=0000 Pci=0000   PCI: PBEAR[00000000] PBEFR[0] 
Mail1[00000000]. Arm=0000 Pci=0000   AHB: ABEAR[00000000] ABEFR[0] 
SlaveBase[01f00000]  TargetId[0]  MasterFn[0]
PMER [00000000]
PMR  [20000000]
PMAR [00000000]
Quantum pci> home
Quantum> exit

Returning to CLI mode 

--> port

Syntax error - use '?' to see valid completions

--> 
agent          Get a file from a remote host
autoprov       
bridge         Configure layer 2 bridge
console        Old console access
dhcpclient     DHCP client configuration commands
dhcpserver     DHCP server configuration commands
diagnosticTest 
dnsclient      DNS client configuration commands
dnsrelay       DNS relay configuration
ethernet       Commands to configure ethernet transports
firewall       Firewall configuration commands
help           Top level CLI help
igmp           
imdebug        Directly access the information model
ip             Configure IP router
nat            NAT configuration commands
port           Physical port configuration commands
pppoa          PPP over ATM configuration
pppoe          
rfc1483        Commands to configure RFC1483 transports
security       Security configuration commands not specific to NAT or firewall
source         Read a file of commands
system         System administration commands
transports     Transport configuration commands
user           User commands
webserver      Webserver configuration commands
zipb           Configure Zero-Configuration IP Bridge
--> port

Syntax error - use '?' to see valid completions

--> port 
a1             Port name
ethernet       Port name
list           List ports by type
usb-ethernet   Port name
wireless       Port name
--> port      bridge show 
interface      Display named interface settings
[valid command]
--> bridge show interface / 
wireless       Bridge Interface
usb-ethernet   Bridge Interface
--> bridge show interface wier  reless
 
Bridge Interface: wireless

  Filter Type: All
  Port Filter: All

-->