broadnas

ttermpro：一个非常不错的TELNET 仿真软件。

No such device
No such device
No such device
No such device
info, udhcp client (v0.9.8) started
error, SIOCGIFINDEX failed!: No such device
killall: udhcpd: no process killed
killall: udhcpd: no process killed
killall: dnsmasq: no process killed
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
connect: Network is unreachable
No such device
No such device
killall: udhcpd: no process killed
killall: udhcpd: no process killed
killall: dnsmasq: no process killed
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
connect: Network is unreachable
Hit enter to continue...connect: Network is unreachable


CFE version 1.1.0 for BCM94780 (32bit,SP,LE)
Build Date: Tue Mar 16 18:32:03 PST 2004 (builder@nlab-sv1-builder)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.31.12.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.31.12.0
CPU type 0x29006: 264MHz
Total memory: 0x4000000 bytes (64MB)

Total memory used by CFE:  0x8032B790 - 0x80C30C80 (9458928)
Initialized Data:          0x8032B790 - 0x8032D910 (8576)
BSS Area:                  0x8032D910 - 0x8032EC80 (4976)
Local Heap:                0x8032EC80 - 0x8042EC80 (1048576)
Stack Area:                0x8042EC80 - 0x80430C80 (8192)
Text (code) segment:       0x80300000 - 0x8032B790 (178064)
Boot area (physical):      0x00C31000 - 0x00C71000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-90-4C-4E-04-B0, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash1.os File: Options:(null)
Loading: .... 2351104 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (builder@nlab-sv1-builder) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #1 Tue Mar 16 18:55:42 PST 2004
BCM47XX ChipID = 0x4704, RevisionID = 8, Options = 0x2
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
bcm-2wire-core.o:: /proc/bus/ does not exist
DS1337 RTC initialized.
CPU: BCM4704 rev 8 at 264 MHz
Calibrating delay loop... 263.78 BogoMIPS
Memory: 62280k/65536k available (2074k kernel code, 3256k reserved, 124k data, 80k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([e-mail])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [e-mail]).
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
Generic MIPS RTC Driver v1.0
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AEC6265: IDE controller on PCI bus 01 dev 10
PCI: Enabling device 01:02.0 (0000 -> 0003)
AEC6265: chipset revision 7
AEC6265: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AEC6265: ROM enabled at 0x00400000
    ide2: BM-DMA at 0x0120-0x0127, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x0128-0x012f, BIOS settings: hdg:pio, hdh:pio
PPP generic driver version 2.4.2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
flash device: 800000 at 1c000000
Physically mapped flash: cramfs filesystem found at block 1240
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007e0000 : "linux"
0x001362a8-0x007e0000 : "rootfs"
0x007e0000-0x007f0000 : "nvramcopy"
0x007f0000-0x00800000 : "nvram"
sflash: found no supported devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Skipping autodetection of RAID arrays.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/il/il.o
insmod: init_module: il: No such device
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
insmod: init_module: wl: No such device
Using /lib/modules/2.4.20/kernel/drivers/scsi/frodo/frodo.o
insmod: init_module: frodo: Device or resource busy
Checking to see that USB initialization is done...
Hit enter to short-circuit regular system start-up...No such device
No such device
No such device
No such device
info, udhcp client (v0.9.8) started
error, SIOCGIFINDEX failed!: No such device
killall: udhcpd: no process killed
killall: udhcpd: no process killed
killall: dnsmasq: no process killed
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
connect: Network is unreachable
No such device
No such device
killall: udhcpd: no process killed
killall: udhcpd: no process killed
killall: dnsmasq: no process killed
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
iptables who? (do you need to insmod?)
connect: Network is unreachable
Hit enter to continue...connect: Network is unreachable



BusyBox v1.00-pre2 (2004.03.17-02:33+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# 
# c c cd proc
# cat pci
PCI devices found:
  Bus  0, device   0, function  0:
    Class 0501: PCI device 14e4:0800 (rev 3).
      IRQ 3.
      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
  Bus  0, device   1, function  0:
    Class 0200: PCI device 14e4:4713 (rev 6).
      IRQ 4.
      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
  Bus  0, device   2, function  0:
    Class 0200: PCI device 14e4:4713 (rev 6).
      IRQ 5.
      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
  Bus  0, device   3, function  0:
    Class 0c03: PCI device 14e4:4715 (rev 2).
      IRQ 6.
      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
  Bus  0, device   4, function  0:
    Class 0604: PCI device 14e4:0804 (rev 8).
      IRQ 2.
      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
      Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
  Bus  0, device   5, function  0:
    Class 0b30: PCI device 14e4:0816 (rev 0).
      IRQ 2.
      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
  Bus  0, device   6, function  0:
    Class 0703: PCI device 14e4:4712 (rev 2).
      IRQ 2.
      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
  Bus  0, device   7, function  0:
    Class 1000: PCI device 14e4:4708 (rev 0).
      IRQ 2.
      Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
  Bus  0, device   8, function  0:
    Class 0500: PCI device 14e4:080f (rev 0).
      IRQ 3.
      Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
  Bus  1, device   0, function  0:
    Class 0600: PCI device 14e4:4704 (rev 0).
      IRQ 2.
      Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
      Prefetchable 32 bit memory at 0x0 [0x7ffffff].
  Bus  1, device   2, function  0:
    Class 0100: PCI device 1191:0008 (rev 7).
      IRQ 2.
      Master Capable.  Latency=19.  Min Gnt=11.Max Lat=4.
      I/O at 0x100 [0x107].
      I/O at 0x108 [0x10b].
      I/O at 0x110 [0x117].
      I/O at 0x118 [0x11b].
      I/O at 0x120 [0x12f].
#