c_code.h

Pressure Sensor Assemble Code

#define LcmLengthDots            240
#define LcmWidthDots            64
char xdata LcmDataPort _at_ 0x2000;
char xdata LcmCmdPort  _at_ 0x2004;

sbit AD_BUSY = P1^2;
sbit AD_A0 = P1^3;
sbit AD_A1 = P1^4;
sbit FPWR = P1^5;
sbit FCHRG = P1^6;
sbit FUSB = P1^7; 

sbit FS = P3^5;
sbit Key= P3^4;

char xdata PortA000 _at_ 0xA000;
char xdata Port6000 _at_ 0x6000;
char xdata Port10F4 _at_ 0x10F4;
char xdata Port10FF _at_ 0x01FF;
char xdata Port10FB _at_ 0x10FB;

char data Regstr;

void CheckRWCD(void);
void CheckAutoWrite(void);
void CheckScreen(void);
void LcmWriteData(unsigned char uData);
unsigned char LcmReadData( void );
void LcmWriteCommand(unsigned char Command);
void LcmWriteCommandWith1Par(unsigned char Parameter,unsigned char Command);
void LcmWriteCommandWith2Par(unsigned char Parameter1,unsigned char Parameter2,unsigned char Command);
void LcmInit( void );
void Delay(unsigned int MS);
void DelayKey(unsigned char HalfSecond);
void LcmClear( unsigned char FillByte );
void LocateXY(unsigned char x,unsigned char y,unsigned char mode);
void PutChar(unsigned char x,unsigned char y,unsigned char CharByte);
void PutString(unsigned char x,unsigned char y,unsigned char *str);
//void DisplayOneBmp(unsigned char *puts);
//void ReverseOneBmp( void );
//void ScreenReadDemo( void );
//void DisplayDots(unsigned char DotByte,unsigned char n);

unsigned char code str_Welcome[];
unsigned char code str_Hibernate[];
unsigned char code str_Charge[];