dsp281x_hall3.h

附件程序是我用DSP2812开发的无刷直流电机控制程序

/* ==================================================================================
File name:        DSP281x_Hall3.H                     
                    
Originator:	Digital Control Systems Group
			Texas Instruments
Description:  
Header file containing data type and object definitions and 
initializers. Also contains prototypes for the functions in DSP281x_HALL3.C.

Target: TMS320F281x family

=====================================================================================
 History:
-------------------------------------------------------------------------------------
 04-15-2005	Version 3.20: Using DSP281x v. 1.00 or higher 
---------------------------------------------------------------------------------- */

#ifndef __DSP281X_HALL3_H__
#define __DSP281X_HALL3_H__

#include "DSP281x_BMSK.h"

/*-----------------------------------------------------------------------------
 Initialization states for T2CON and CAPCONA 
------------------------------------------------------------------------------*/
#define HALL3_INIT_STATE    0xB0FC

/*-----------------------------------------------------------------------------
Define the structure of the Capture Driver Object 
------------------------------------------------------------------------------*/
typedef struct { Uint16 CmtnTrigHall;     // Output: Commutation trigger for Mod6cnt input (0 or 0x7FFF)
                 Uint16 CapCounter;       // Variable: Running count of detected edges on CAP1,2,3
                 Uint16 DebounceCount;    // Variable: Counter/debounce delay current value
                 Uint16 DebounceAmount;   // Parameter: Counter delay amount to validate/debounce GPIO readings
                 Uint16 HallGpio;         // Variable: Most recent logic level on CAP/GPIO
                 Uint16 HallGpioBuffer;   // Variable: Buffer of last logic level on CAP/GPIO while being debounced
                 Uint16 HallGpioAccepted; // Variable: Debounced logic level on CAP/GPIO
                 Uint16 EdgeDebounced;    // Variable: Trigger from Debounce function to Hall_Drv, if = 0x7FFF edge is debounced
                 Uint16 HallMap[6];       // Variable: CAP/GPIO logic levels for HallMapPointer = 0-5
                 Uint16 CapFlag;          // Variable: CAP flags, indicating which CAP detected the edge
                 Uint16 StallCount;       // Variable: If motor stalls, this counter overflow triggers 
                                          //           commutation to start rotation. Rotation is defined as
                                          //           an edge detection of a hall signal.
                 Uint16 HallMapPointer;   // Input/Output (see note below): During hall map creation, this variable points to the 
                                          //            current commutation state.  After map creation, it 
                                          //            points to the next commutation state.
                 int16 Revolutions;       // Parameter: Running counter, with a revolution defined as 1-cycle 
                                          //            of the 6 hall states
                 void (*init)();          // Pointer to the init function 
                 void (*read)();          // Pointer to the read function 
               } HALL3;

/* Note:
- When HallMapPointer is as an input, it is defined by MOD6_CNT.
- When HallMapPointer is as an output, during hall map creation, 
  this variable points to the current commutation state.  
  After map creation, it points to the next commutation state.
*/
/*-----------------------------------------------------------------------------
Define a handle for the HALL3 object
------------------------------------------------------------------------------*/
typedef HALL3 *HALL3_handle;

/*------------------------------------------------------------------------------
Default Initializer for the F281X_EV1 HALL3 Object
------------------------------------------------------------------------------*/
#define F281XEV1HALL3   { 0,  \
                          0,  \
                          0,  \
                         10,  \
                          0,  \
                          0,  \
                          0,  \
                          0,  \
              {0,0,0,0,0,0},  \
                          0,  \
                     0xFFFF,  \
                          0,  \
                        -10,  \
					    (void (*)(Uint32))F281X_EV1_HALL3_Init,  \
                        (void (*)(Uint32))F281X_EV1_HALL3_Read  \
                         }

/*------------------------------------------------------------------------------
Target Independent Default Initializer HALL3 Object
------------------------------------------------------------------------------*/
#define HALL3_DEFAULTS F281XEV1HALL3

/*------------------------------------------------------------------------------
Prototypes for the functions in DSP281X_HALL3.C
------------------------------------------------------------------------------*/
void F281X_EV1_HALL3_Init(HALL3_handle);
void F281X_EV1_HALL3_Read(HALL3_handle);                                             
void F281X_EV1_HALL3_Determine_State(HALL3_handle);
void F281X_EV1_HALL3_Debounce(HALL3_handle);
void F281X_EV1_HALL3_Next_State_Ptr(HALL3_handle);
void F281X_EV1_HALL3_Create_Map(HALL3_handle);

#endif // __DSP281X_HALL3_H__