ch8_matrix.fit.qmsg

用fpga+usb显现的4通道800K的数据采集方案

{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div5:inst20\|clk_out  " "Info: Automatically promoted node div5:inst20\|clk_out " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0}  } { { "div5.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div5.v" 4 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div5:inst20|clk_out } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div5:inst20|clk_out } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div_mult:inst23\|counter\[1\]  " "Info: Automatically promoted node div_mult:inst23\|counter\[1\] " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "div_mult:inst23\|counter\[1\]~34 " "Info: Destination node div_mult:inst23\|counter\[1\]~34" {  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst23|counter[1]~34 } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst23|counter[1]~34 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0}  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst23|counter[1] } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst23|counter[1] } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div5:inst19\|clk_out  " "Info: Automatically promoted node div5:inst19\|clk_out " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0}  } { { "div5.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div5.v" 4 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div5:inst19|clk_out } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div5:inst19|clk_out } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "div_mult:inst16\|counter\[8\]  " "Info: Automatically promoted node div_mult:inst16\|counter\[8\] " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "div_mult:inst16\|counter\[8\]~34 " "Info: Destination node div_mult:inst16\|counter\[8\]~34" {  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst16|counter[8]~34 } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst16|counter[8]~34 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0}  } { { "div_mult.v" "" { Text "C:/Documents and Settings/Administrator.LEFAN/桌面/8通道调试程序/4通道800K加判断(修改方案后)/div_mult.v" 7 -1 0 } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst16|counter[8] } "NODE_NAME" } } { "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartusii/quartus/bin/TimingClosureFloorplan.fld" "" "" { div_mult:inst16|counter[8] } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Extra Info: Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" {  } {  } 1 0 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "Extra Info: No registers were packed into other blocks" {  } {  } 1 0 "No registers were packed into other blocks" 0 0}  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "2 unused 3.30 1 1 0 " "Info: Number of I/O pins in group: 2 (unused VREF, 3.30 VCCIO, 1 input, 1 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use 3.30V 2 83 " "Info: I/O bank number 1 does not use VREF pins and has 3.30V VCCIO pins. 2 total pin(s) used --  83 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 2 77 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 2 total pin(s) used --  77 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use 3.30V 8 64 " "Info: I/O bank number 3 does not use VREF pins and has 3.30V VCCIO pins. 8 total pin(s) used --  64 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use 3.30V 20 54 " "Info: I/O bank number 4 does not use VREF pins and has 3.30V VCCIO pins. 20 total pin(s) used --  54 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use 3.30V 15 70 " "Info: I/O bank number 5 does not use VREF pins and has 3.30V VCCIO pins. 15 total pin(s) used --  70 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use unused 0 81 " "Info: I/O bank number 6 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  81 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use unused 0 74 " "Info: I/O bank number 7 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  74 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use unused 0 72 " "Info: I/O bank number 8 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  72 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}