cat-id-tbl.c

linux下串口开发调试工具

/* Automatically generated by po2tbl.sed from minicom.pot.  */

#if HAVE_CONFIG_H
# include <config.h>
#endif

#include "libgettext.h"

const struct _msg_ent _msg_tbl[] = {
  {"", 1},
  {"minicom: WARNING: configuration file not found, using defaults\n", 2},
  {"minicom: there is no global configuration file %s\n", 3},
  {"Ask your sysadm to create one (with minicom -s).\n", 4},
  {"minicom: cannot open macro file %s\n", 5},
  {"You are not allowed to change this parameter", 6},
  {" A - File name (empty=disable) :", 7},
  {" B - Log connects and hangups  :", 8},
  {" C - Log file transfers        :", 9},
  {"Change which setting?", 10},
  {"Logging options", 11},
  {" A - Download directory :", 12},
  {" B - Upload directory   :", 13},
  {" C - Script directory   :", 14},
  {" D - Script program     :", 15},
  {" E - Kermit program     :", 16},
  {" F - Logging options", 17},
  {"Yes", 18},
  {"No ", 19},
  {"M  Zmodem download string activates...", 20},
  {"N  Use filename selection window......", 21},
  {"O  Prompt for download directory......", 22},
  {"Change which setting? (SPACE to delete)", 23},
  {"     Name             Program", 24},
  {"Name U/D FullScr IO-Red. Multi", 25},
  {"Delete which protocol? ", 26},
  {" A -    Serial Device      :", 27},
  {" B - Lockfile Location     :", 28},
  {" C -   Callin Program      :", 29},
  {" D -  Callout Program      :", 30},
  {" E -    Bps/Par/Bits       :", 31},
  {" F - Hardware Flow Control :", 32},
  {" G - Software Flow Control :", 33},
  {"DTE speed ", 34},
  {"line speed", 35},
  {" A - Init string .........", 36},
  {" B - Reset string ........", 37},
  {" C - Dialing prefix #1....", 38},
  {" D - Dialing suffix #1....", 39},
  {" E - Dialing prefix #2....", 40},
  {" F - Dialing suffix #2....", 41},
  {" G - Dialing prefix #3....", 42},
  {" H - Dialing suffix #3....", 43},
  {" I - Connect string ......", 44},
  {" J - No connect strings ..", 45},
  {" K - Hang-up string ......", 46},
  {" L - Dial cancel string ..", 47},
  {" M - Dial time ...........", 48},
  {" N - Delay before redial .", 49},
  {" O - Number of tries .....", 50},
  {" P - DTR drop time (0=no).", 51},
  {" Q - Auto bps detect .....", 52},
  {" R - Modem has DCD line ..", 53},
  {" S - Status line shows ...", 54},
  {" T - Multi-line untag ....", 55},
  {"Modem and dialing parameter setup", 56},
  {"      (Return or Esc to exit)", 57},
  {" A - Command key is         :", 58},
  {" B - Backspace key sends    :", 59},
  {" C - Status line is         :", 60},
  {" D - Alarm sound            :", 61},
  {" E - Foreground Color (menu):", 62},
  {" F - Background Color (menu):", 63},
  {" G - Foreground Color (term):", 64},
  {" H - Background Color (term):", 65},
  {" I - Foreground Color (stat):", 66},
  {" J - Background Color (stat):", 67},
  {" K - History Buffer Size    :", 68},
  {"Change which setting?  (Esc to exit)", 69},
  {" L - Macros file            :", 70},
  {" N - Macros enabled         :", 71},
  {" O - Character conversion   :", 72},
  {"Screen and keyboard", 73},
  {" M - Edit Macros\n", 74},
  {"You can't change colors in black and white mode", 75},
  {"Menu foreground == background color, change!", 76},
  {"Terminal foreground == background color, change!", 77},
  {"History Buffer Size", 78},
  {"\
\n\
  You have changed the history buffer size.\n\
  You will need to save the configuration file and\n\
  restart minicom for the change to take effect.\n\
\n\
  Hit a key to Continue... ", 79},
  {"Program new command key", 80},
  {"\
\n\
 Press the new command key. If you want to use\n", 81},
  {"\
 the META or ALT key enter:\n\
\n", 82},
  {"  o SPACE if your meta key sets the 8th bit high\n", 83},
  {"  o ESC   if your meta key sends the ESCAPE prefix (standard)\n", 84},
  {"\
\n\
\n\
 Press new command key: ", 85},
  {"Meta-8th bit ", 86},
  {"Escape (Meta)", 87},
  {"disabled", 88},
  {"enabled", 89},
  {"This system does not support history", 90},
  {"ERROR: you do not have permission to create a file there!", 91},
  {"ERROR: cannot open macro file %s", 92},
  {"Reading macros", 93},
  {" A - Terminal emulation  :", 94},
  {" B - Backspace key sends :", 95},
  {" C -      Status line is :", 96},
  {" D -  Newline delay (ms) :", 97},
  {"Terminal settings", 98},
  {"Cannot write to %s", 99},
  {"Configuration saved", 100},
  {"ERROR: Macros have changed but no filename is set!", 101},
  {"Cannot write macros file %s", 102},
  {"Macros saved", 103},
  {"You are not allowed to create a configuration", 104},
  {"Give name to save this configuration?", 105},
  {"Filenames and paths", 106},
  {"File transfer protocols", 107},
  {"Serial port setup", 108},
  {"Modem and dialing", 109},
  {"Save setup as..", 110},
  {"Exit", 111},
  {"Exit from Minicom", 112},
  {"Save setup as %s", 113},
  {"configuration", 114},
  {"BLACK", 115},
  {"RED", 116},
  {"GREEN", 117},
  {"YELLOW", 118},
  {"BLUE", 119},
  {"MAGENTA", 120},
  {"CYAN", 121},
  {"WHITE", 122},
  {"Comm Parameters", 123},
  {"\
   Speed          Parity          Data\n\
\n", 124},
  {" A: 300           L: None         S: 5\n", 125},
  {" B: 1200          M: Even         T: 6\n", 126},
  {" C: 2400          N: Odd          U: 7\n", 127},
  {" D: 4800          O: Mark         V: 8\n", 128},
  {" E: 9600          P: Space\n", 129},
  {" F: 19200                      Stopbits\n", 130},
  {" G: 38400                         W: 1\n", 131},
  {"                                    W: 1\n", 132},
  {" H: 57600                         X: 2\n", 133},
  {" I: 115200        Q: 8-N-1\n", 134},
  {"                  Q: 8-N-1\n", 135},
  {" J: 230400        R: 7-E-1\n", 136},
  {"                  R: 7-E-1\n", 137},
  {" K: Current\n", 138},
  {"\
\n\
 Choice, or <Enter> to exit? ", 139},
  {"Current: %5s %s%s%s  ", 140},
  {"F1 to F10 Macros", 141},
  {" (LEGEND: ^M = C-M, ^L = C-L, ^G = C-G, ^R = C-R, ^~ = pause 1 second,", 142},
  {"  \\u = username, \\p = password, \\\\ = \\)", 143},
  {"CHANGED", 144},
  {"Character conversion", 145},
  {" char    in out    char    in out    char    in out    char    in out\n", 146},
  {"\
\n\
 A - load table\tB - save table", 147},
  {"\tfile:%s", 148},
  {"\
\n\
 C - edit char\tD - next screen\tE - prev screen\n", 149},
  {" F - convert capture: %s\n", 150},
  {"Load file: %s", 151},
  {"Save as file: %s", 152},
  {"Character to be edited: ", 153},
  {"Input character ascii value 0-255", 154},
  {"Change input to: %s", 155},
  {"Change output to: %s", 156},
  {"Cannot open conversion table %s", 157},
  {"Cannot write conversion table %s", 158},
  {"Initializing Modem", 159},
  {"Resetting Modem", 160},
  {"Hanging up", 161},
  {"Hangup (%ld:%02ld:%02ld)", 162},
  {"Sending BREAK", 163},
  {"    No connection: %s.      \n", 164},
  {"   Press any key to continue..    ", 165},
  {"     Retry in %2d seconds             ", 166},
  {"Max retries", 167},
  {"You are already online! Hang up first.", 168},
  {"Autodial", 169},
  {"Dialing", 170},
  {"      At : %s\n", 171},
  {" Last on : %s at %s\n", 172},
  {" Dialing : %s", 173},
  {"\
\n\
      At : %s", 174},
  {"\
\n\
 Last on : %s at %s", 175},
  {"    Time : %-3d", 176},
  {"     Attempt #%d", 177},
  {"\
\n\
\n\
\n\
 Escape to cancel, space to retry.", 178},
  {"Cancelled", 179},
  {"Connected. Press any key to continue", 180},
  {"Timeout", 181},
  {"Manually entered number", 182},
  {"Cannot open ~/.dialdir: permission denied", 183},
  {"Phonelist garbled (unknown version?)", 184},
  {"Unknown dialing directory version", 185},
  {"Phonelist garbled (?)", 186},
  {"Out of memory while reading dialing directory", 187},
  {"Old dialdir copied as %s.%hd", 188},
  {"Can't write to ~/.dialdir", 189},
  {"Error writing ~/.dialdir!", 190},
  {" A -  Name                :", 191},
  {" B -  Number              :", 192},
  {" C -  Dial string #       :", 193},
  {" D -  Local echo          :", 194},
  {" E -  Script              :", 195},
  {" F -  Username            :", 196},
  {" G -  Password            :", 197},
  {" H -  Terminal Emulation  :", 198},
  {" I -  Backspace key sends :", 199},
  {" J -  Linewrap            :", 200},
  {" K -  Line Settings       :", 201},
  {" L -  Conversion table    :", 202},
  {"Delete", 203},
  {"Backspace", 204},