rtl8180-0.21.patch

用于wfi无线密码的破解,在linux或WINDOWS下,最好不要用intel的无线网卡

Only in .: .r8180_core.o.d
diff -ur ../rtl8180-0.21/ieee80211_tx.c ./ieee80211_tx.c
--- ../rtl8180-0.21/ieee80211_tx.c	2005-04-12 21:02:17.000000000 +0000
+++ ./ieee80211_tx.c	2005-10-12 17:38:19.000000000 +0000
@@ -577,6 +577,14 @@
 	
 	spin_lock_irqsave(&ieee->lock,flags);
 	
+	if (ieee->iw_mode == IW_MODE_MONITOR) {
+		ieee->func->hard_data_xmit(ieee->dev,skb,0);
+		dev_kfree_skb_any(skb);
+		ieee->stats.tx_packets++;
+		ieee->dev->trans_start = jiffies;
+		goto exit;
+	}
+	
 	if(ieee->queue_stop){
 		IEEE80211DMESG("EE: IEEE hard_start_xmit invoked when kernel queue should be stopped");
 		netif_stop_queue(ieee->dev);
diff -ur ../rtl8180-0.21/r8180_core.c ./r8180_core.c
--- ../rtl8180-0.21/r8180_core.c	2005-04-12 12:39:56.000000000 +0000
+++ ./r8180_core.c	2005-10-12 17:42:25.000000000 +0000
@@ -2204,11 +2204,12 @@
 void rtl8180_hard_data_xmit(struct net_device *dev,struct sk_buff *skb,short morefrag)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)dev->priv;
-	int mode;
+	int mode, priority = LOW_PRIORITY;
 	//unsigned long flags;
 	
 	mode = priv->ieee80211->iw_mode;
-	
+	if( mode == IW_MODE_MONITOR )
+		priority = HI_PRIORITY;
 	
 	/*
 	* This function doesn't require lock because we make
@@ -2220,13 +2221,13 @@
 	//spin_lock_irqsave(&priv->tx_lock,flags);	
 			
 	
-	if (!check_nic_enought_desc(dev, LOW_PRIORITY)){
+	if (!check_nic_enought_desc(dev, priority)){
 		DMESG("Error: no descriptor left by previous TX (avail %d) ",
-			get_curr_tx_free_desc(dev, LOW_PRIORITY));
+			get_curr_tx_free_desc(dev, priority));
 		ieee80211_r8180_stop_queue(priv->ieee80211);
 	}
-	rtl8180_tx(dev, (u32*)skb->data, skb->len, LOW_PRIORITY, morefrag,0);
-	if (!check_nic_enought_desc(dev, LOW_PRIORITY))
+	rtl8180_tx(dev, (u32*)skb->data, skb->len, priority, morefrag,0);
+	if (!check_nic_enought_desc(dev, priority))
 		ieee80211_r8180_stop_queue(priv->ieee80211);
 		
 	//spin_unlock_irqrestore(&priv->tx_lock,flags);	
@@ -3411,10 +3412,18 @@
 	if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) 
 		rtl8180_IBSS_create(dev);
 		
-/*	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR){ 
+	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
+		priv->retry_rts = 0;
+		priv->retry_data = 0;
+		rtl8180_tx_enable(dev);
+
 		netif_carrier_on(dev);
+		if(netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+		else
+			netif_start_queue(dev);
 	}
-*/
+
 	if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
 		
 	//	rtl8180_tx_enable(dev);
@@ -3608,8 +3617,7 @@
 	pio_flags = (unsigned long)pci_resource_flags (pdev, 0);
 	
 	if (!(pio_flags & IORESOURCE_IO)) {
-		DMESG("%s: region #0 not a PIO resource, aborting", 
-		      pdev->slot_name);
+		DMESG("r8180: region #0 not a PIO resource, aborting");
 		goto fail;
 	}
 	
@@ -3629,8 +3637,7 @@
 	pmem_flags = pci_resource_flags (pdev, 1);
 	
 	if (!(pmem_flags & IORESOURCE_MEM)) {
-		DMESG("%s: region #1 not a MMIO resource, aborting", 
-		      pdev->slot_name);
+		DMESG("r8180: region #1 not a MMIO resource, aborting");
 		goto fail;
 	}