rs274ngc_return.hh

数控系统中的解释器源代码

#ifndef RS274NGC_RETURN_H
#define RS274NGC_RETURN_H

#define RS274NGC_OK 0
#define RS274NGC_EXIT 1
#define RS274NGC_EXECUTE_FINISH 2
#define RS274NGC_ENDFILE 3
#define NCE_A_FILE_IS_ALREADY_OPEN 4
#define NCE_ALL_AXES_MISSING_WITH_G92 5
#define NCE_ALL_AXES_MISSING_WITH_MOTION_CODE 6
#define NCE_ARC_RADIUS_TOO_SMALL_TO_REACH_END_POINT 7
#define NCE_ARGUMENT_TO_ACOS_OUT_OF_RANGE 8
#define NCE_ARGUMENT_TO_ASIN_OUT_OF_RANGE 9
#define NCE_ATTEMPT_TO_DIVIDE_BY_ZERO 10
#define NCE_ATTEMPT_TO_RAISE_NEGATIVE_TO_NON_INTEGER_POWER 11
#define NCE_BAD_CHARACTER_USED 12
#define NCE_BAD_FORMAT_UNSIGNED_INTEGER 13
#define NCE_BAD_NUMBER_FORMAT 14
#define NCE_BUG_BAD_G_CODE_MODAL_GROUP_0 15
#define NCE_BUG_CODE_NOT_G0_OR_G1 16
#define NCE_BUG_CODE_NOT_G17_G18_OR_G19 17
#define NCE_BUG_CODE_NOT_G20_OR_G21 18
#define NCE_BUG_CODE_NOT_G28_OR_G30 19
#define NCE_BUG_CODE_NOT_G2_OR_G3 20
#define NCE_BUG_CODE_NOT_G40_G41_OR_G42 21
#define NCE_BUG_CODE_NOT_G43_OR_G49 22
#define NCE_BUG_CODE_NOT_G4_G10_G28_G30_G53_OR_G92_SERIES 23
#define NCE_BUG_CODE_NOT_G61_G61_1_OR_G64 24
#define NCE_BUG_CODE_NOT_G90_OR_G91 25
#define NCE_BUG_CODE_NOT_G93_OR_G94 26
#define NCE_BUG_CODE_NOT_G98_OR_G99 27
#define NCE_BUG_CODE_NOT_IN_G92_SERIES 28
#define NCE_BUG_CODE_NOT_IN_RANGE_G54_TO_G593 29
#define NCE_BUG_CODE_NOT_M0_M1_M2_M30_M60 30
#define NCE_BUG_DISTANCE_MODE_NOT_G90_OR_G91 31
#define NCE_BUG_FUNCTION_SHOULD_NOT_HAVE_BEEN_CALLED 32
#define NCE_BUG_IN_TOOL_RADIUS_COMP 33
#define NCE_BUG_PLANE_NOT_XY_YZ_OR_XZ 34
#define NCE_BUG_SIDE_NOT_RIGHT_OR_LEFT 35
#define NCE_BUG_UNKNOWN_MOTION_CODE 36
#define NCE_BUG_UNKNOWN_OPERATION 37
#define NCE_CANNOT_CHANGE_AXIS_OFFSETS_WITH_CUTTER_RADIUS_COMP 38
#define NCE_CANNOT_CHANGE_UNITS_WITH_CUTTER_RADIUS_COMP 39
#define NCE_CANNOT_CREATE_BACKUP_FILE 40
#define NCE_CANNOT_DO_G1_WITH_ZERO_FEED_RATE 41
#define NCE_CANNOT_DO_ZERO_REPEATS_OF_CYCLE 42
#define NCE_CANNOT_MAKE_ARC_WITH_ZERO_FEED_RATE 43
#define NCE_CANNOT_MOVE_ROTARY_AXES_DURING_PROBING 44
#define NCE_CANNOT_OPEN_BACKUP_FILE 45
#define NCE_CANNOT_OPEN_VARIABLE_FILE 46
#define NCE_CANNOT_PROBE_IN_INVERSE_TIME_FEED_MODE 47
#define NCE_CANNOT_PROBE_WITH_CUTTER_RADIUS_COMP_ON 48
#define NCE_CANNOT_PROBE_WITH_ZERO_FEED_RATE 49
#define NCE_CANNOT_PUT_A_B_IN_CANNED_CYCLE 50
#define NCE_CANNOT_PUT_A_C_IN_CANNED_CYCLE 51
#define NCE_CANNOT_PUT_AN_A_IN_CANNED_CYCLE 52
#define NCE_CANNOT_TURN_CUTTER_RADIUS_COMP_ON_OUT_OF_XY_PLANE 53
#define NCE_CANNOT_TURN_CUTTER_RADIUS_COMP_ON_WHEN_ON 54
#define NCE_CANNOT_USE_A_WORD 55
#define NCE_CANNOT_USE_AXIS_VALUES_WITH_G80 56
#define NCE_CANNOT_USE_AXIS_VALUES_WITHOUT_A_G_CODE_THAT_USES_THEM 57
#define NCE_CANNOT_USE_B_WORD 58
#define NCE_CANNOT_USE_C_WORD 59
#define NCE_CANNOT_USE_G28_OR_G30_WITH_CUTTER_RADIUS_COMP 60
#define NCE_CANNOT_USE_G53_INCREMENTAL 61
#define NCE_CANNOT_USE_G53_WITH_CUTTER_RADIUS_COMP 62
#define NCE_CANNOT_USE_TWO_G_CODES_THAT_BOTH_USE_AXIS_VALUES 63
#define NCE_CANNOT_USE_XZ_PLANE_WITH_CUTTER_RADIUS_COMP 64
#define NCE_CANNOT_USE_YZ_PLANE_WITH_CUTTER_RADIUS_COMP 65
#define NCE_COMMAND_TOO_LONG 66
#define NCE_CONCAVE_CORNER_WITH_CUTTER_RADIUS_COMP 67
#define NCE_COORDINATE_SYSTEM_INDEX_PARAMETER_5220_OUT_OF_RANGE 68
#define NCE_CURRENT_POINT_SAME_AS_END_POINT_OF_ARC 69
#define NCE_CUTTER_GOUGING_WITH_CUTTER_RADIUS_COMP 70
#define NCE_D_WORD_WITH_NO_G41_OR_G42 71
#define NCE_DWELL_TIME_MISSING_WITH_G4 72
#define NCE_DWELL_TIME_P_WORD_MISSING_WITH_G82 73
#define NCE_DWELL_TIME_P_WORD_MISSING_WITH_G86 74
#define NCE_DWELL_TIME_P_WORD_MISSING_WITH_G88 75
#define NCE_DWELL_TIME_P_WORD_MISSING_WITH_G89 76
#define NCE_EQUAL_SIGN_MISSING_IN_PARAMETER_SETTING 77
#define NCE_F_WORD_MISSING_WITH_INVERSE_TIME_ARC_MOVE 78
#define NCE_F_WORD_MISSING_WITH_INVERSE_TIME_G1_MOVE 79
#define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN 80
#define NCE_FILE_ENDED_WITH_NO_PERCENT_SIGN_OR_PROGRAM_END 81
#define NCE_FILE_NAME_TOO_LONG 82
#define NCE_FILE_NOT_OPEN 83
#define NCE_G_CODE_OUT_OF_RANGE 84
#define NCE_H_WORD_WITH_NO_G43 85
#define NCE_I_WORD_GIVEN_FOR_ARC_IN_YZ_PLANE 86
#define NCE_I_WORD_MISSING_WITH_G87 87
#define NCE_I_WORD_WITH_NO_G2_OR_G3_OR_G87_TO_USE_IT 88
#define NCE_J_WORD_GIVEN_FOR_ARC_IN_XZ_PLANE 89
#define NCE_J_WORD_MISSING_WITH_G87 90
#define NCE_J_WORD_WITH_NO_G2_OR_G3_OR_G87_TO_USE_IT 91
#define NCE_K_WORD_GIVEN_FOR_ARC_IN_XY_PLANE 92
#define NCE_K_WORD_MISSING_WITH_G87 93
#define NCE_K_WORD_WITH_NO_G2_OR_G3_OR_G87_TO_USE_IT 94
#define NCE_L_WORD_WITH_NO_CANNED_CYCLE_OR_G10 95
#define NCE_LEFT_BRACKET_MISSING_AFTER_SLASH_WITH_ATAN 96
#define NCE_LEFT_BRACKET_MISSING_AFTER_UNARY_OPERATION_NAME 97
#define NCE_LINE_NUMBER_GREATER_THAN_99999 98
#define NCE_LINE_WITH_G10_DOES_NOT_HAVE_L2 99
#define NCE_M_CODE_GREATER_THAN_99 100
#define NCE_MIXED_RADIUS_IJK_FORMAT_FOR_ARC 101
#define NCE_MULTIPLE_A_WORDS_ON_ONE_LINE 102
#define NCE_MULTIPLE_B_WORDS_ON_ONE_LINE 103
#define NCE_MULTIPLE_C_WORDS_ON_ONE_LINE 104
#define NCE_MULTIPLE_D_WORDS_ON_ONE_LINE 105
#define NCE_MULTIPLE_F_WORDS_ON_ONE_LINE 106
#define NCE_MULTIPLE_H_WORDS_ON_ONE_LINE 107
#define NCE_MULTIPLE_I_WORDS_ON_ONE_LINE 108
#define NCE_MULTIPLE_J_WORDS_ON_ONE_LINE 109
#define NCE_MULTIPLE_K_WORDS_ON_ONE_LINE 110
#define NCE_MULTIPLE_L_WORDS_ON_ONE_LINE 111
#define NCE_MULTIPLE_P_WORDS_ON_ONE_LINE 112
#define NCE_MULTIPLE_Q_WORDS_ON_ONE_LINE 113
#define NCE_MULTIPLE_R_WORDS_ON_ONE_LINE 114
#define NCE_MULTIPLE_S_WORDS_ON_ONE_LINE 115
#define NCE_MULTIPLE_T_WORDS_ON_ONE_LINE 116
#define NCE_MULTIPLE_X_WORDS_ON_ONE_LINE 117
#define NCE_MULTIPLE_Y_WORDS_ON_ONE_LINE 118
#define NCE_MULTIPLE_Z_WORDS_ON_ONE_LINE 119
#define NCE_MUST_USE_G0_OR_G1_WITH_G53 120
#define NCE_NEGATIVE_ARGUMENT_TO_SQRT 121
#define NCE_NEGATIVE_D_WORD_TOOL_RADIUS_INDEX_USED 122
#define NCE_NEGATIVE_F_WORD_USED 123
#define NCE_NEGATIVE_G_CODE_USED 124
#define NCE_NEGATIVE_H_WORD_TOOL_LENGTH_OFFSET_INDEX_USED 125
#define NCE_NEGATIVE_L_WORD_USED 126
#define NCE_NEGATIVE_M_CODE_USED 127
#define NCE_NEGATIVE_OR_ZERO_Q_VALUE_USED 128
#define NCE_NEGATIVE_P_WORD_USED 129
#define NCE_NEGATIVE_SPINDLE_SPEED_USED 130
#define NCE_NEGATIVE_TOOL_ID_USED 131
#define NCE_NESTED_COMMENT_FOUND 132
#define NCE_NO_CHARACTERS_FOUND_IN_READING_REAL_VALUE 133
#define NCE_NO_DIGITS_FOUND_WHERE_REAL_NUMBER_SHOULD_BE 134
#define NCE_NON_INTEGER_VALUE_FOR_INTEGER 135
#define NCE_NULL_MISSING_AFTER_NEWLINE 136
#define NCE_OFFSET_INDEX_MISSING 137
#define NCE_P_VALUE_NOT_AN_INTEGER_WITH_G10_L2 138
#define NCE_P_VALUE_OUT_OF_RANGE_WITH_G10_L2 139
#define NCE_P_WORD_WITH_NO_G4_G10_G82_G86_G88_G89 140
#define NCE_PARAMETER_FILE_OUT_OF_ORDER 141
#define NCE_PARAMETER_NUMBER_OUT_OF_RANGE 142
#define NCE_Q_WORD_MISSING_WITH_G83 143
#define NCE_Q_WORD_WITH_NO_G83 144
#define NCE_QUEUE_IS_NOT_EMPTY_AFTER_PROBING 145
#define NCE_R_CLEARANCE_PLANE_UNSPECIFIED_IN_CYCLE 146
#define NCE_R_I_J_K_WORDS_ALL_MISSING_FOR_ARC 147
#define NCE_R_LESS_THAN_X_IN_CYCLE_IN_YZ_PLANE 148
#define NCE_R_LESS_THAN_Y_IN_CYCLE_IN_XZ_PLANE 149
#define NCE_R_LESS_THAN_Z_IN_CYCLE_IN_XY_PLANE 150
#define NCE_R_WORD_WITH_NO_G_CODE_THAT_USES_IT 151
#define NCE_RADIUS_TO_END_OF_ARC_DIFFERS_FROM_RADIUS_TO_START 152
#define NCE_RADIUS_TOO_SMALL_TO_REACH_END_POINT 153
#define NCE_REQUIRED_PARAMETER_MISSING 154
#define NCE_SELECTED_TOOL_SLOT_NUMBER_TOO_LARGE 155
#define NCE_SLASH_MISSING_AFTER_FIRST_ATAN_ARGUMENT 156
#define NCE_SPINDLE_NOT_TURNING_CLOCKWISE_IN_G84 157
#define NCE_SPINDLE_NOT_TURNING_IN_G86 158
#define NCE_SPINDLE_NOT_TURNING_IN_G87 159
#define NCE_SPINDLE_NOT_TURNING_IN_G88 160
#define NCE_SSCANF_FAILED 161
#define NCE_START_POINT_TOO_CLOSE_TO_PROBE_POINT 162
#define NCE_TOO_MANY_M_CODES_ON_LINE 163
#define NCE_TOOL_LENGTH_OFFSET_INDEX_TOO_BIG 164
#define NCE_TOOL_MAX_TOO_LARGE 165
#define NCE_TOOL_RADIUS_INDEX_TOO_BIG 166
#define NCE_TOOL_RADIUS_NOT_LESS_THAN_ARC_RADIUS_WITH_COMP 167
#define NCE_TWO_G_CODES_USED_FROM_SAME_MODAL_GROUP 168
#define NCE_TWO_M_CODES_USED_FROM_SAME_MODAL_GROUP 169
#define NCE_UNABLE_TO_OPEN_FILE 170
#define NCE_UNCLOSED_COMMENT_FOUND 171
#define NCE_UNCLOSED_EXPRESSION 172
#define NCE_UNKNOWN_G_CODE_USED 173
#define NCE_UNKNOWN_M_CODE_USED 174
#define NCE_UNKNOWN_OPERATION 175
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_A 176
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_M 177
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_O 178
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_X 179
#define NCE_UNKNOWN_WORD_STARTING_WITH_A 180
#define NCE_UNKNOWN_WORD_STARTING_WITH_C 181
#define NCE_UNKNOWN_WORD_STARTING_WITH_E 182
#define NCE_UNKNOWN_WORD_STARTING_WITH_F 183
#define NCE_UNKNOWN_WORD_STARTING_WITH_L 184
#define NCE_UNKNOWN_WORD_STARTING_WITH_R 185
#define NCE_UNKNOWN_WORD_STARTING_WITH_S 186
#define NCE_UNKNOWN_WORD_STARTING_WITH_T 187
#define NCE_UNKNOWN_WORD_WHERE_UNARY_OPERATION_COULD_BE 188
#define NCE_X_AND_Y_WORDS_MISSING_FOR_ARC_IN_XY_PLANE 189
#define NCE_X_AND_Z_WORDS_MISSING_FOR_ARC_IN_XZ_PLANE 190
#define NCE_X_VALUE_UNSPECIFIED_IN_YZ_PLANE_CANNED_CYCLE 191
#define NCE_X_Y_AND_Z_WORDS_ALL_MISSING_WITH_G38_2 192
#define NCE_Y_AND_Z_WORDS_MISSING_FOR_ARC_IN_YZ_PLANE 193
#define NCE_Y_VALUE_UNSPECIFIED_IN_XZ_PLANE_CANNED_CYCLE 194
#define NCE_Z_VALUE_UNSPECIFIED_IN_XY_PLANE_CANNED_CYCLE 195
#define NCE_ZERO_OR_NEGATIVE_ARGUMENT_TO_LN 196
#define NCE_ZERO_RADIUS_ARC 197
#define NCE_UNDEFINE_LINE_NUMBER_WITH_G25 198
#define NCE_NO_E_WORD_WITH_G22 199
#define NCE_E_WORD_INVAILD 200
#define NCE_NO_G24_USE_G22 201
#define NCE_SUB_LEVEL_OUT_OF_DEPTH 202
#define NCE_NO_G22_USE_G24  203
#define NCE_CANNOT_USE_AXIS_VALUES_WITH_G11 204





//added by ganxm on 2005-07-14 for c-compensation
#define C_COMPENSATION_ERROR 205
#define C_COMPENSATION_START_JUDGE_ERROR 206
#define C_COMPENSATION_FIRST_MOVE_ISNT_LINE_ERROR 207
#define C_COMPENSATION_START_POINT_TOO_NEAR_ERROR 208
#define C_COMPENSATION_ARC_CENTER_IS_THE_SAME_TO_START_OR_END_PROGRAM_POINT_ERROR 209
#define C_COMPENSATION_ARC_RADIUS_IS_SMALLER_THAN_CUTTER_RADIUS_ERROR 210
#define C_COMPENSATION_START_ANGLE_IS_LESS_THAN_90_ERROR 211
#define C_COMPENSATION_NOT_G0_G1_G2_G3_ERROR 212
#define C_COMPENSATION_END_MOVE_ISNT_LINE_ERROR 213
#define C_COMPENSATION_END_POINT_IS_TOO_NEAR_ERROR 214
#define C_COMPENSATION_END_ANGLE_IS_LESS_THAN_90_ERROR 215
#define C_COMPENSATION_END_AFTER_G40_NO_LINE_MOVE_ERROR 216
#define C_COMPENSATION_GET_INTERSECTION_FROM_2ARC_ERROR 217
#define C_COMPENSATION_GetIntersectAngle_ERROR 218
#define C_COMPENSATION_GetIntersectFromLineArc_ERROR 219
#define C_COMPENSATION_GetAPointFrom2Point 220
#define C_COMPENSATION_GetAOutPointFrom2Point 221
#define C_COMPENSATION_2LineParellel 222
#define C_COMPENSATION_GetIntersectionNo 223
#define C_COMPENSATION_GetALineFrom2Point 224
#define C_COMPENSATION_Convert_ARC 225
#define C_COMPENSATION_2ARC_WaiQie 226
#define C_COMPENSATION_END_ERROR 227
#define C_COMPENSATION_START_AND_END_POINT_IS_SAME_ERROR 228
#define C_COMPENSATION_START_ERROR 229
#define C_COMPENSATION_AFTER_COMPENSATION_ARC_RADIUS_IS_ZEARO_ERROR 230

#define NCE_BUG_BAD_G_CODE_MODAL_GROUP_4 231 /* Added manually, 24-Oct-2004, RUM */
#define NCE_BUG_CODE_NOT_G92_SERIES 232 /* Added manually, 26-Oct-2004, RUM */
#define NCE_P_VALUE_NOT_AN_INTEGER_WITH_G92 233 /* Added manually, 26-Oct-2004, RUM */
#define NCE_P_VALUE_OUT_OF_RANGE_WITH_G92 234 /* Added manually, 26-Oct-2004, RUM */
#define NCE_P_VALUE_MUST_BE_2_IF_USED_WITH_G54_TO_G593 235 /* Added manually, 02-Nov-2004, RUM */
#define NCE_TWO_CONSECUTIVE_P_WORDS_ON_ONE_LINE 236 /* Added manually, 09-Nov-2004, RUM */
#define NCE_TWO_CONSECUTIVE_Q_WORDS_ON_ONE_LINE 237 /* Added manually, 09-Nov-2004, RUM */
#define NCE_FILE_ENDED_WITH_NO_PROGRAM_END 238 /* Added manually, 18-Feb-2005 */
#define NCE_ZERO_LENGTH_FILE 239 /* Added manually, 21-Mar-2005 */
#define NCE_MULTIPLE_P_NUMBER_LIMIT_EXCEEDED 240 /* Added manually, 10-Mar-2005 */
#define NCE_MULTIPLE_Q_NUMBER_LIMIT_EXCEEDED 241 /* Added manually, 10-Mar-2005 */
#define NCE_M_CODE_NOT_IMPLEMENTED 242 /* Added manually, 30-Mar-2005 */
#define NCE_P_WORD_MISSING_WITH_M62_M63_M64_OR_M65 243 /* Added manually, 22-April_2005 */

#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_E 244
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_N 245
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_G 246
#define NCE_UNKNOWN_OPERATION_NAME_STARTING_WITH_L 247
#define NCE_TOO_MANY_SUBROUTINE_PARAMETERS 248
#define NCE_TOO_MANY_SUBROUTINE_LEVELS 249
#define NCE_UNKNOWN_COMMAND_IN_O_LINE 250
#define NCE_TOO_MANY_OWORD_LABELS 251
#define NCE_UNKNOWN_OWORD_NUMBER 252
#define NCE_NESTED_SUBROUTINE_DEFN 253
#define NCE_NOT_IN_SUBROUTINE_DEFN 254
#define NCE_RETURN_OUTSIDE_OF_SUBROUTINE 255

#define NCE_COMPENSATION_QUEUE_FULL 256
#define NCE_G68_NO_R 257
#define NCE_G68_PLANE_BASE_ERROR 258
#define NCE_CODE_ERROR 259
#define NCE_G51_NO_P_OR_IKJ 260
#define NCE_G51_MIX_P_AND_IKJ 261
#define C_COMPENSATION_Damage 262
#define NCE_FILE_ENDED_WITH_NO_G40 263
#define NCE_UVW_XYZ_MIXED_USE 264



#define RS274NGC_MIN_ERROR 3 /* This is referenced in 
                                src/task/cnctaskmain.cc, and is used to set
                                the machine state to 'wait' if it exists. 
                                At the beginning of the above error list, 
                                you will note the first four of this list are 
                                reserved. */




#ifdef LATHE_FLAG
#define NCE_K_WORD_MISSING_WITH_G33 264+1
#define NCE_F_WORD_USED_WITH_G33 264+2
#define NCE_G33_NOT_SUPPORTED 264+3
#define NCE_CANNED_CYCLES_NOT_SUPPORTED 264+4

#define NCE_NO_FILE_OPEN 264+5
#define NCE_NO_PROFILE_NUM 264+6
#define NCE_PROFILE_NUM_REPEAT 264+7
#define NCE_G26_NO_G23 264+8
#define NCE_G23_NO_G26 264+9
#define NCE_PROF_MOTION_USED_IN_MDI 264+10
#define NCE_NO_D_WORD_WITH_PROF 264+11
#define NCE_NO_L_WORD_WITH_PROF 264+12
#define NCE_NO_L_WORD_WITH_G23 264+13
#define NCE_PROF_TOOL_POS_INVIALD 264+14
#define NCE_PROF_POINT_INVIALD 264+15
#define RS274NGC_MAX_ERROR 264+15
#else
#define RS274NGC_MAX_ERROR 264 /* This should be set to the highest number
                                  in the error list. */
#endif


#endif /* RS274NGC_RETURN_H */