fifo.pin

TCC221图像传感器和FPGA实现图像采集

 -- Copyright (C) 1991-2007 Altera Corporation
 -- Your use of Altera Corporation's design tools, logic functions 
 -- and other software and tools, and its AMPP partner logic 
 -- functions, and any output files from any of the foregoing 
 -- (including device programming or simulation files), and any 
 -- associated documentation or information are expressly subject 
 -- to the terms and conditions of the Altera Program License 
 -- Subscription Agreement, Altera MegaCore Function License 
 -- Agreement, or other applicable license agreement, including, 
 -- without limitation, that your use is for the sole purpose of 
 -- programming logic devices manufactured by Altera and sold by 
 -- Altera or its authorized distributors.  Please refer to the 
 -- applicable agreement for further details.
 -- 
 -- This is a Quartus II output file. It is for reporting purposes only, and is
 -- not intended for use as a Quartus II input file. This file cannot be used
 -- to make Quartus II pin assignments - for instructions on how to make pin
 -- assignments, please see Quartus II help.
 ---------------------------------------------------------------------------------



 ---------------------------------------------------------------------------------
 -- NC            : No Connect. This pin has no internal connection to the device.
 -- VCCINT        : Dedicated power pin, which MUST be connected to VCC  (1.2V).
 -- VCCIO         : Dedicated power pin, which MUST be connected to VCC
 --                 of its bank.
 --					Bank 1:		2.5V
 --					Bank 2:		2.5V
 --					Bank 3:		2.5V
 --					Bank 4:		2.5V
 --					Bank 5:		2.5V
 --					Bank 6:		2.5V
 --					Bank 7:		2.5V
 --					Bank 8:		2.5V
 -- GND           : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
 --					It can also be used to report unused dedicated pins. The connection
 --					on the board for unused dedicated pins depends on whether this will
 --					be used in a future design. One example is device migration. When
 --					using device migration, refer to the device pin-tables. If it is a
 --					GND pin in the pin table or if it will not be used in a future design
 --					for another purpose the it MUST be connected to GND. If it is an unused
 --					dedicated pin, then it can be connected to a valid signal on the board
 --					(low, high, or toggling) if that signal is required for a different
 --					revision of the design.
 -- GND+          : Unused input pin. It can also be used to report unused dual-purpose pins.
 --					This pin should be connected to GND. It may also be connected  to a
 --					valid signal  on the board  (low, high, or toggling)  if that signal
 --					is required for a different revision of the design.
 -- GND*          : Unused  I/O  pin.   This pin can either be left unconnected or
 --           	    connected to GND.  Connecting this pin to GND will improve the
 --           	    device's immunity to noise.
 -- RESERVED      : Unused I/O pin, which MUST be left unconnected.
 -- RESERVED_INPUT    : Pin is tri-stated and should be connected to the board.
 -- RESERVED_INPUT_WITH_WEAK_PULLUP    : Pin is tri-stated with internal weak pull-up resistor.
 -- RESERVED_INPUT_WITH_BUS_HOLD       : Pin is tri-stated with bus-hold circuitry.
 -- RESERVED_OUTPUT_DRIVEN_HIGH        : Pin is output driven high.
 ---------------------------------------------------------------------------------

Quartus II Version 7.1 Build 156 04/30/2007 SJ Full Version
CHIP  "fifo"  ASSIGNED TO AN: EP3C25E144C8

Pin Name/Usage               : Location  : Dir.   : I/O Standard      : Voltage : I/O Bank  : User Assignment
-------------------------------------------------------------------------------------------------------------
VCCD_PLL3                    : 1         : power  :                   : 1.2V    :           :                
GNDA                         : 2         : gnd    :                   :         :           :                
VCCA3                        : 3         : power  :                   : 2.5V    :           :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 4         :        :                   :         : 1         :                
VCCINT                       : 5         : power  :                   : 1.2V    :           :                
~ALTERA_ASDO_DATA1~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 6         : input  : 2.5 V             :         : 1         : N              
RESERVED_INPUT_WITH_WEAK_PULLUP : 7         :        :                   :         : 1         :                
~ALTERA_FLASH_nCE_nCSO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 8         : input  : 2.5 V             :         : 1         : N              
nSTATUS                      : 9         :        :                   :         : 1         :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 10        :        :                   :         : 1         :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 11        :        :                   :         : 1         :                
~ALTERA_DCLK~                : 12        : output : 2.5 V             :         : 1         : N              
~ALTERA_DATA0~               : 13        : input  : 2.5 V             :         : 1         : N              
nCONFIG                      : 14        :        :                   :         : 1         :                
TDI                          : 15        : input  :                   :         : 1         :                
TCK                          : 16        : input  :                   :         : 1         :                
VCCIO1                       : 17        : power  :                   : 2.5V    : 1         :                
TMS                          : 18        : input  :                   :         : 1         :                
GND                          : 19        : gnd    :                   :         :           :                
TDO                          : 20        : output :                   :         : 1         :                
nCE                          : 21        :        :                   :         : 1         :                
wrclock                      : 22        : input  : 2.5 V             :         : 1         : N              
rdclock                      : 23        : input  : 2.5 V             :         : 1         : N              
clr                          : 24        : input  : 2.5 V             :         : 2         : N              
GND+                         : 25        :        :                   :         : 2         :                
VCCIO2                       : 26        : power  :                   : 2.5V    : 2         :                
GND                          : 27        : gnd    :                   :         :           :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 28        :        :                   :         : 2         :                
VCCINT                       : 29        : power  :                   : 1.2V    :           :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 30        :        :                   :         : 2         :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 31        :        :                   :         : 2         :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 32        :        :                   :         : 2         :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 33        :        :                   :         : 2         :                
VCCINT                       : 34        : power  :                   : 1.2V    :           :                
VCCA1                        : 35        : power  :                   : 2.5V    :           :                
GNDA                         : 36        : gnd    :                   :         :           :                
VCCD_PLL1                    : 37        : power  :                   : 1.2V    :           :                
VCCINT                       : 38        : power  :                   : 1.2V    :           :                
RESERVED_INPUT_WITH_WEAK_PULLUP : 39        :        :                   :         : 3         :                
VCCIO3                       : 40        : power  :                   : 2.5V    : 3         :                
GND                          : 41        : gnd    :                   :         :           :