📄 bgp.my
字号:
RFC1269-MIB DEFINITIONS ::= BEGIN IMPORTS NetworkAddress, IpAddress, Counter FROM RFC1155-SMI mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9], and the TRAP-TYPE macro as defined -- in [10]. bgp OBJECT IDENTIFIER ::= { mib-2 15 } bgpVersion OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported." ::= { bgp 1 } bgpLocalAs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local autonomous system number." ::= { bgp 2 } bgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The bgp peer table." ::= { bgp 3 } bgpIdentifier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The BGP Identifier of local system." ::= { bgp 4 } bgpPeerEntry OBJECT-TYPE SYNTAX BgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a BGP peer connection." INDEX { bgpPeerRemoteAddr } ::= { bgpPeerTable 1 } BgpPeerEntry ::= SEQUENCE { bgpPeerIdentifier IpAddress, bgpPeerState INTEGER, bgpPeerAdminStatus INTEGER, bgpPeerNegotiatedVersion INTEGER, bgpPeerLocalAddr IpAddress, bgpPeerLocalPort INTEGER, bgpPeerRemoteAddr IpAddress, bgpPeerRemotePort INTEGER, bgpPeerRemoteAs INTEGER, bgpPeerInUpdates Counter, bgpPeerOutUpdates Counter, bgpPeerInTotalMessages Counter, bgpPeerOutTotalMessages Counter, bgpPeerLastError OCTET STRING } bgpPeerIdentifier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The BGP Identifier of this entry's BGP peer." ::= { bgpPeerEntry 1 } bgpPeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The bgp peer connection state. " ::= { bgpPeerEntry 2 } bgpPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication." ::= { bgpPeerEntry 3 } bgpPeerNegotiatedVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The negotiated version of BGP running between the two peers. " ::= { bgpPeerEntry 4 } bgpPeerLocalAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address of this entry's BGP connection." ::= { bgpPeerEntry 5 } bgpPeerLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port for the TCP connection between the BGP peers." ::= { bgpPeerEntry 6 } bgpPeerRemoteAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IP address of this entry's BGP peer." ::= { bgpPeerEntry 7 } bgpPeerRemotePort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port for the TCP connection between the BGP peers. Note that the objects bgpLocalAddr, bgpLocalPort, bgpRemoteAddr and bgpRemotePort provide the appropriate reference to the standard MIB TCP connection table." ::= { bgpPeerEntry 8 }
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -