data_output_mux.vhd

如何使用ISE和FPGA使用指南

library ieee;
use ieee.std_logic_1164.all;

entity data_output_mux is
    port (
        clk        : in  std_logic;
        reset      : in  std_logic;
        dv_enable  : in  std_logic;
        data_valid : in  std_logic_vector (3 downto 0);
        data_cha   : in  std_logic_vector (7 downto 0);
        data_chb   : in  std_logic_vector (7 downto 0);
        data_chc   : in  std_logic_vector (7 downto 0);
        data_chd   : in  std_logic_vector (7 downto 0);
        final_data : out std_logic_vector (7 downto 0);
        valid_ch   : out std_logic_vector (3 downto 0));
end data_output_mux;

architecture rtl of data_output_mux is
    type v_ch_array is array (3 downto 0) of std_logic_vector(3 downto 0);
    signal v_ch : v_ch_array;
begin  -- rtl

    valid_ch <= v_ch(3) or v_ch(2) or v_ch(1) or v_ch(0);

    process (clk)
    begin  -- process
        if rising_edge(clk) then
            if reset = '1' then
                for i in 3 downto 0 loop
                    v_ch(i)      <= (others => '0');
                end loop;  -- i
                final_data       <= (others => '0');
            else
                v_ch(3)          <= (others => '0');
                v_ch(2 downto 0) <= v_ch(3 downto 1);

                if dv_enable = '1' then
                    v_ch(3)            <= data_valid;
                    case data_valid is
                        when "0001" =>
                            final_data <= data_cha;
                        when "0010" =>
                            final_data <= data_chb;
                        when "0100" =>
                            final_data <= data_chc;
                        when "1000" =>
                            final_data <= data_chd;
                        when others => null;
                    end case;
                end if;
            end if;
        end if;
    end process;



end rtl;