📄 cc1100.c.bak
字号:
/*
v2.5 halSpiWriteReg(CCxxx0_MCSM2, 0x08);
halSpiWriteReg(CCxxx0_PKTLEN, 0x1F);
v2.6 测试发送：Dly1mS(100); 删去
*/
#include <iom128v.h>
#include "cc1100_reg.h"
typedef unsigned char uint8_t;
typedef unsigned int uint16_t;
unsigned char paTable[8] = {0xC0 ,0xC0 ,0xC0 ,0xC0 ,0xC0 ,0xC0 ,0xC0 ,0xC0};
unsigned char rxBuffer[32]; //接收缓冲区的大小
unsigned char rd_reg;
//unsigned char INTERRUPT_STATE=0x00;
unsigned char SEND_DONE=0x00;
void SET_CLOCK() { PORTG |=0x1; }
void CLEAR_CLOCK() { PORTG &=~(0x1); }
void SET_IN() { PORTG |=0x2; }
void CLEAR_IN() { PORTG &=~(0x2); }
void SET_CSN() { PORTC |=0x4; }
void CLEAR_CSN() { PORTC &=~(0x4); }
//char GET_OUT() { return (PINC & 0x2)!=0;}
//char GET_GDO0() { return (PIND & 0x2)!=0;}
int GET_OUT() { return (* (volatile unsigned char *)(unsigned int )& * (volatile unsigned char *)(0x13 + 0x20) & (1 << 1)) != 0;}
extern uint8_t CC1100_sendDone();
extern uint8_t CC1100_receive(uint8_t *msg);
unsigned char CC1100_send(uint8_t *txPtr,uint8_t size)
{
if (1)
return CC1100_sendRFburst(txPtr,size);
else
;
}
/******************************************/
//延时函数 10us
void Dly10us()
{
unsigned char i;
for(i=0;i<10;i++)
{
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
}
}
//延时函数 1ms
void Dly1mS(unsigned int l)
{
unsigned int i,j;
while(l--)
for(i=0;i<54;i++)
for(j=0;j<100;j++);
}
/******************************************/
unsigned char SPI_write(unsigned char value)
{
unsigned char i,spi_status,rd_pin;
for(i=0;i<8;i++)
{
if((value&0x80)==0x80)
{
Dly10us();
SET_IN(); // SI=1
}
else
{
CLEAR_IN(); // SI=0
Dly10us();Dly10us();
}
Dly10us();Dly10us();Dly10us();
SET_CLOCK(); //SCLK=1;
Dly10us();Dly10us();Dly10us();Dly10us();Dly10us();
value <<=1;
spi_status<<=1;
rd_pin=GET_OUT();
if((rd_pin&0x01)==0x01)
spi_status=spi_status|0x01;
else
spi_status=spi_status&0xfe;
CLEAR_CLOCK();
Dly10us();Dly10us();
}
return(spi_status);
}
unsigned char SPI_read()
{
unsigned char i,value,rd_pin;
for(i=0;i<8;i++)
{
SET_CLOCK(); //P_SCLK=1;
value <<=1;Dly10us();Dly10us();Dly10us();Dly10us();Dly10us();
rd_pin=GET_OUT();
if((rd_pin&0x01)==0x01) value|=0x01;
else value&=0xfe;
Dly10us();Dly10us();
CLEAR_CLOCK(); //SCLK=0 //P_SCLK=0;
Dly10us();Dly10us();Dly10us();Dly10us();Dly10us();
}
return value;
}
/******************************************/
unsigned char spiGetRxTxStatus()
{
unsigned char RxTxstatus;
CLEAR_CSN(); // CSn=0
while(GET_OUT());
CLEAR_CLOCK();
RxTxstatus=SPI_write(CCxxx0_SNOP);
CLEAR_CLOCK(); //SCLK=0
CLEAR_IN(); // SI=0
SET_CSN(); //CSn=1
return(RxTxstatus);
}
/******************************************/
void halSpiWriteReg(unsigned char addr, unsigned char value)
{
CLEAR_CSN();
while(GET_OUT());
CLEAR_CLOCK();
addr&=0x7F;
SPI_write(addr);
SPI_write(value);
CLEAR_CLOCK();
CLEAR_IN();
SET_CSN();
}
/******************************************/
void halSpiStrobe(unsigned char strobe)
{
CLEAR_CSN(); // CSn=0
CLEAR_CLOCK();
while(GET_OUT());
SPI_write(strobe);
CLEAR_CLOCK();
CLEAR_IN();
SET_CSN();
}
/*******************************************/
void halSpiWriteBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count)
{
unsigned char i,j,value;
CLEAR_CLOCK();
Dly10us();Dly10us();
CLEAR_CSN(); // CSn=0
addr|=WRITE_BURST;
SPI_write(addr);
CLEAR_IN();
for(j=0;j<count;j++)
{
value=buffer[j];
SPI_write(value);
CLEAR_IN();
for(i=0;i<100;i++);
}
SET_CSN();
}
/******************************/
void CC1100_POR()
{
unsigned int i;
halSpiStrobe(CCxxx0_SIDLE);
SET_CSN();
for(i=0;i<100;i++);
CLEAR_CSN();
for(i=0;i<100;i++);
SET_CSN();
for(i=0;i<2000;i++);
CLEAR_CSN();
while(GET_OUT());
halSpiStrobe(CCxxx0_SRES);
CLEAR_CLOCK();
CLEAR_IN();
SET_CSN();
}
/*******************************************/
unsigned char halRfSendPacket(unsigned char *txBuffer, unsigned char size)
{
halSpiStrobe(CCxxx0_SFTX);
Dly1mS(15);
//Dly1mS(25);
halSpiWriteBurstReg(CCxxx0_TXFIFO, txBuffer, size);
Dly1mS(15);
//Dly1mS(25);
halSpiStrobe(CCxxx0_STX);
while(spiGetRxTxStatus()&0x70)
{
Dly1mS(1);
//Dly1mS(2);
}
SEND_DONE=0x01;
return 0;
}// halRfSendPacket
/*******************************************/
/*
void TxCCxx00()
{
unsigned char i;
halSpiWriteReg(CCxxx0_FREND0, 0x10); //CC1100:POWER=10DBM;CC2500:1DBM
Dly1mS(25);;
for(i=0;i<4;i++) //发四次
{
halRfSendPacket(txBuffer_CCxx00, sizeof(txBuffer_CCxx00));
Dly1mS(50);
}
halSpiWriteReg(CCxxx0_FREND0, 0x15); //CC1100太近会收不到，将发射功率降低到-10DBM //#define CCxxx0_FREND0 0x22
Dly1mS(50);
halRfSendPacket(txBuffer_CCxx00, sizeof(txBuffer_CCxx00));
Dly1mS(100);
}
*/
/*********************************************************/
unsigned char halSpiReadReg(unsigned char addr)
{
unsigned char value;
CLEAR_CLOCK();
Dly10us();Dly10us();
CLEAR_CSN(); // CSn=0
addr|=READ_SINGLE;
SPI_write(addr);
CLEAR_IN();
Dly10us();Dly10us();Dly10us();Dly10us();Dly10us();
value=0;
value=SPI_read();
Dly10us();Dly10us();Dly10us();
CLEAR_CLOCK();
CLEAR_IN();
SET_CSN(); // CSn=0 P_CSn=0;
return value;
}
/**************************************************/
void halSpiReadBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count)
{
unsigned char i,value;
CLEAR_CLOCK();
Dly10us();Dly10us();
CLEAR_CSN(); // CSn=0 P_CSn=0;
addr|=READ_BURST;
SPI_write(addr);
CLEAR_IN();
Dly10us();Dly10us();Dly10us();Dly10us();Dly10us();
value=0;
for(i=0;i<count;i++)
{
value=SPI_read();
buffer[i]=value;
}
Dly10us();Dly10us();Dly10us();
CLEAR_CLOCK();
CLEAR_IN();
SET_CSN(); // CSn=0 P_CSn=0;
}
/**************************************************/
unsigned char halSpiReadStatus(unsigned char addr)
{
unsigned char value,rd_pin;
CLEAR_CSN(); // CSn=0 P_CSn=0;
while(GET_OUT());
CLEAR_CLOCK(); //SCLK=0 //P_SCLK=0;
addr|=READ_BURST;
SPI_write(addr);
value=SPI_read();
CLEAR_CLOCK(); //SCLK=0 //P_SCLK=0;
CLEAR_IN(); // SI=0 P_SI=0;
SET_CSN(); //CSn=1 P_CSn=1;
return value;
}// halSpiReadStatus
/**************************************************/
void halRfWriteRfSettings()
{
l_setCC1100:
halSpiWriteReg(CCxxx0_FSCTRL1, 0x0C);
halSpiWriteReg(CCxxx0_FSCTRL0, 0x00);
halSpiWriteReg(CCxxx0_FREQ2, 0x10);
halSpiWriteReg(CCxxx0_FREQ1, 0x09);
halSpiWriteReg(CCxxx0_FREQ0, 0x7B);
halSpiWriteReg(CCxxx0_MDMCFG4, 0xC6);
halSpiWriteReg(CCxxx0_MDMCFG3, 0x83);
halSpiWriteReg(CCxxx0_MDMCFG2, 0x02);
halSpiWriteReg(CCxxx0_MDMCFG1, 0x22);
halSpiWriteReg(CCxxx0_MDMCFG0, 0xF8);
halSpiWriteReg(CCxxx0_CHANNR, 0x0b);
halSpiWriteReg(CCxxx0_DEVIATN, 0x30);
halSpiWriteReg(CCxxx0_FREND1, 0x56);
halSpiWriteReg(CCxxx0_FREND0, 0x10);
halSpiWriteReg(CCxxx0_MCSM0, 0x18);
halSpiWriteReg(CCxxx0_FOCCFG, 0x15);
halSpiWriteReg(CCxxx0_BSCFG, 0x6C);
halSpiWriteReg(CCxxx0_AGCCTRL2, 0x03);
halSpiWriteReg(CCxxx0_AGCCTRL0, 0x91);
halSpiWriteReg(CCxxx0_FSCAL3, 0xA9);
halSpiWriteReg(CCxxx0_FSCAL2, 0x2A);
halSpiWriteReg(CCxxx0_FSCAL0, 0x0D);
halSpiWriteReg(CCxxx0_FSTEST, 0x59);
halSpiWriteReg(CCxxx0_TEST2, 0x86);
halSpiWriteReg(CCxxx0_TEST1, 0x3D);
halSpiWriteReg(CCxxx0_TEST0, 0x09);
halSpiWriteReg(CCxxx0_IOCFG2, 0x24);
halSpiWriteReg(CCxxx0_IOCFG0, 0x06);
halSpiWriteReg(CCxxx0_PKTCTRL1, 0x04);
halSpiWriteReg(CCxxx0_PKTCTRL0, 0x05);
halSpiWriteReg(CCxxx0_ADDR, 0x00);
halSpiWriteReg(CCxxx0_PKTLEN, 0x1F); // hejie ,接收数据长度
//halSpiWriteReg(CCxxx0_PKTLEN, 0xFF);
halSpiWriteReg(CCxxx0_MCSM2, 0x08); // CCxxx0_MCSM2 修改限制时间 默认为０７ 修改为００
//halSpiWriteReg(CCxxx0_FIFOTHR, 0x07);
if(halSpiReadReg(CCxxx0_MDMCFG1)!=0x22){
// led1On();
goto l_setCC1100;
}
}
/**************************************************/
//接收到数据中断
#pragma interrupt_handler cc1100_rx_isr:3
void cc1100_rx_isr()
{
unsigned char packetLength;
// led2Toggle();
packetLength = halSpiReadReg(CCxxx0_RXFIFO);
rxBuffer[0]=packetLength;
if(rxBuffer[0] <= 32)
{
halSpiReadBurstReg(CCxxx0_RXFIFO, &rxBuffer[1], packetLength);
post(CC1100_receive);
}
else
{
halSpiStrobe(CCxxx0_SFRX);
}
halSpiStrobe(CCxxx0_SFRX);
halSpiStrobe(CCxxx0_SRX);
}
/**************************************************/
//extern led2On();
//初始化
uint8_t CC1100_init()
{
uint16_t nnn;
SET_CSN();
CLEAR_CLOCK();
CLEAR_IN();
CC1100_setInterrupt(0x00);
CC1100_POR();
for(nnn=0;nnn<500;nnn++);
halRfWriteRfSettings();
// led2On();
halSpiWriteBurstReg(CCxxx0_PATABLE, paTable, sizeof(paTable));
CC1100_setInterrupt(0x00);
CC1100_setStrobe(CCxxx0_SIDLE);
return 1;
}
//设置状态
uint8_t CC1100_setStrobe(uint8_t state)
{
halSpiStrobe(state);
Dly1mS(5);
return 1;
}
//写寄存器
uint8_t CC1100_setRegister(uint8_t address,uint8_t value)
{
halSpiWriteReg(address,value);
return 1;
}
//读寄存器
uint8_t CC1100_readRegister(uint8_t address)
{
rd_reg = halSpiReadReg(address);
return rd_reg;
}
//读状态
uint8_t CC1100_readStatus(uint8_t address)
{
return halSpiReadStatus(address);
}
//连续读
uint8_t CC1100_readBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count)
{
halSpiReadBurstReg(addr, buffer, count);
return 1;
}
//halSpiReadStatus
//设置中断
uint8_t CC1100_setInterrupt(uint8_t flag)
{
if(flag==0x00)
{
EIFR=0x02;EICRA=0x08;EICRB=0x00;EIMSK=0x00;
}
else if(flag==0x01)
{
EIFR=0x02;EICRA=0x08;EICRB=0x00;EIMSK=0x02;
halSpiStrobe(CCxxx0_SRX);
}
else if(flag==0x02)
{
halSpiStrobe(CCxxx0_SRX);
}
return 1;
}
//extern led1On();
//连续发
uint8_t CC1100_sendRFburst(uint8_t *txPtr,uint8_t size)
{
//led1On();
CC1100_setInterrupt(0x00); //关中断
halSpiStrobe(CCxxx0_SIDLE);
halRfSendPacket(txPtr, size);
//Dly1mS(100);
if(SEND_DONE==0x01) //表明发送完成
{
SEND_DONE=0x00;
//led2On();
CC1100_sendDone(1);
CC1100_setInterrupt(0x01); //开中断
}
return 1;
}
/*
uint8_t CC1100_sendDone()
{
return success;
}
uint8_t CC1100_receive(uint8_t *msg)
{
return msg;
}
*/
//更改通道号
void CC1100_change_channr(unsigned char channr_NO)
{
halSpiWriteReg(CCxxx0_CHANNR,channr_NO );
}
uint8_t CC1100_wakeup()
{
uint16_t n,m;
SET_CSN();
for(n=0;n<1000;n++);
CLEAR_CSN();
for(n=0;n<1000;n++)
for(m=0;m<1000;m++);
SET_CSN();
return 1;
}
uint8_t CC1100_sleep()
{
CC1100_setStrobe(0x39);
//call PowerMgrEnable();
return 1;
}⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -