cc1100lib.c

This the code using PIC MCU to control

#define BYTE unsigned char
#define UINT8 unsigned char

void halSpiWriteBurstReg(BYTE addr, BYTE *buffer, BYTE count);
void halSpiReadBurstReg(BYTE addr, BYTE *buffer, BYTE count);
void halSpiWriteReg(BYTE addr, BYTE value);
void halSpiStrobe(BYTE strobe);
BYTE halSpiReadReg(BYTE addr);
BYTE halSpiReadStatus(BYTE addr);
void halRfWriteRfSettings();
void halRfSendPacket(BYTE *txBuffer, UINT8 size);
BYTE halRfReceivePacket(BYTE *rxBuffer, UINT8 length);
void POWER_UP_RESET_CC1100();
BYTE spiGetRxTxStatus(void);
BYTE SPI_write(BYTE value);
BYTE SPI_read();
#define WRITE_BURST     0x40
#define READ_SINGLE     0x80
#define READ_BURST      0xC0

//----------------------------------------------------------
void Dly1mS(unsigned int l) 
{
	int i;
	while(l--) 	for(i=0;i<54;i++);
	
}

//===============================================================
//SPI 写数据
//IN：value
//OUT：spi_status
//=======================================================================
BYTE SPI_write(BYTE value)
{
	unsigned char i,spi_status;
	for(i=0;i<8;i++) { 
		if(value&0x80) 
			{
			  P_SCLK=0;
			  P_SI=1;
			}
		else 
			{
			  P_SCLK=0;
			  P_SI=0;
			}	
		asm("nop"); asm("nop"); asm("nop"); asm("nop");asm("nop");
		asm("nop"); asm("nop"); asm("nop"); asm("nop");asm("nop");
		P_SCLK=1;
		value <<=1;
		spi_status<<=1;	
		if(P_SO=1)
		   spi_status=spi_status|0x01;
		else
			spi_status=spi_status&0xfe;
	}
	P_SCLK=0;
	asm("nop"); asm("nop"); asm("nop"); asm("nop");asm("nop");
	return(spi_status);
}
//================================================================
//SPI读数据
//IN：NONE
//OUT：value
//=======================================================================
BYTE SPI_read()
{
	unsigned char i,value;
	for(i=0;i<8;i++) 
	{ 
		value <<=1;
		P_SCLK=1;
		if(P_SO) value|=0x01;
		else value&=0xFE;
		asm("nop"); asm("nop"); asm("nop"); asm("nop");asm("nop");
		P_SCLK=0;	
	}
//	asm("nop"); asm("nop"); asm("nop"); asm("nop");asm("nop");
	return value;
}
//=======================================================================

//-------------------------------------------------------------------------------------------------------
//  BYTE halSpiReadReg(BYTE addr)
//
//  DESCRIPTION:
//      This function gets the value of a single specified CC1100 register.
//
//  ARGUMENTS:
//      BYTE addr
//          Address of the CC1100 register to be accessed.
//
//  RETURN VALUE:
//      BYTE
//          Value of the accessed CC1100 register.
//-------------------------------------------------------------------------------------------------------
BYTE halSpiReadReg(BYTE addr) 
{
	unsigned char value;
	P_CSn=0;
	while(P_SO);
    P_SCLK=0;
	addr|=READ_SINGLE;
	SPI_write(addr);
	value=SPI_read();
	P_CSn=1;
	P_SCLK=0;
	P_SI=0;
	return value;
}


//-------------------------------------------------------------------------------------------------------
//  BYTE halSpiReadStatus(BYTE addr)
//
//  DESCRIPTION:
//      This function reads a CC1100 status register.
//
//  ARGUMENTS:
//      BYTE addr
//          Address of the CC1100 status register to be accessed.
//
//  RETURN VALUE:
//      BYTE
//          Value of the accessed CC1100 status register.
//-------------------------------------------------------------------------------------------------------
BYTE halSpiReadStatus(BYTE addr) 
{
	unsigned char value;
	P_CSn=0;
	while(P_SO);
    P_SCLK=0;
	addr|=READ_BURST;
	SPI_write(addr);
	value=SPI_read();
	P_CSn=1;
	P_SCLK=0;
	P_SI=0;
	return value;
}// halSpiReadStatus


//-------------------------------------------------------------------------------------------------------
//  void halSpiWriteReg(BYTE addr, BYTE value)
//
//  DESCRIPTION:
//      Function for writing to a single CC1100 register
//
//  ARGUMENTS:
//      BYTE addr
//          Address of a specific CC1100 register to accessed.
//      BYTE value
//          Value to be written to the specified CC1100 register.
//-------------------------------------------------------------------------------------------------------
void halSpiWriteReg(BYTE addr, BYTE value) 
{
	P_CSn=0;
	while(P_SO);
    P_SCLK=0;
	addr&=0x7F;
	SPI_write(addr);
	SPI_write(value);
	P_SI=0;
	P_CSn=1;

}// halSpiWriteReg


//-------------------------------------------------------------------------------------------------------
//  void halSpiReadBurstReg(BYTE addr, BYTE *buffer, BYTE count)
//
//  DESCRIPTION:
//      This function reads multiple CC1100 register, using SPI burst access.
//
//  ARGUMENTS:
//      BYTE addr
//          Address of the first CC1100 register to be accessed.
//      BYTE *buffer
//          Pointer to a byte array which stores the values read from a
//          corresponding range of CC1100 registers.
//      BYTE count
//          Number of bytes to be written to the subsequent CC1100 registers.
//-------------------------------------------------------------------------------------------------------
void halSpiReadBurstReg(BYTE addr, BYTE *buffer, BYTE count) 
{
	unsigned char j,value;
	P_CSn=0;
	while(P_SO);
    P_SCLK=0;
	addr|=READ_BURST;
	SPI_write(addr);
	for(j=0;j<count;j++) 
	{
	  value=SPI_read();
	  buffer[j]=value;
	}
	P_CSn=1;
}// halSpiReadBurstReg



//-------------------------------------------------------------------------------------------------------
//  void halSpiWriteBurstReg(BYTE addr, BYTE *buffer, BYTE count)
//
//  DESCRIPTION:
//      This function writes to multiple CC1100 register, using SPI burst access.
//
//  ARGUMENTS:
//      BYTE addr
//          Address of the first CC1100 register to be accessed.
//      BYTE *buffer
//          Array of bytes to be written into a corresponding range of
//          CCxx00 registers, starting by the address specified in _addr_.
//      BYTE count
//          Number of bytes to be written to the subsequent CC1100 registers.   
//-------------------------------------------------------------------------------------------------------
void halSpiWriteBurstReg(BYTE addr, BYTE *buffer, BYTE count)
{
	unsigned char i,j,value;
	P_CSn=0;
	while(P_SO);
    P_SCLK=0;
	addr|=WRITE_BURST;
	SPI_write(addr);
	for(j=0;j<count;j++) {
	  value=buffer[j];
	  SPI_write(value);
	  P_SCLK=0;	
	  P_SI=0;
	  for(i=0;i<10;i++);
	}
	P_CSn=1;
}// halSpiWriteBurstReg




//-------------------------------------------------------------------------------------------------------
//  void halSpiStrobe(BYTE strobe)
//
//  DESCRIPTION:
//      Function for writing a strobe command to the CC1100
//
//  ARGUMENTS:
//      BYTE strobe
//          Strobe command
//-------------------------------------------------------------------------------------------------------
void halSpiStrobe(BYTE strobe) 
{
	P_CSn=0;
	while(P_SO);
	SPI_write(strobe);
	P_SCLK=0;
	P_SI=0;
	P_CSn=1;

}// halSpiStrobe



//-------------------------------------------------------------------------------------------------------
//  void halRfSendPacket(BYTE *txBuffer, UINT8 size)
//

//      
//  ARGUMENTS:
//      BYTE *txBuffer
//          Pointer to a buffer containg the data that are going to be transmitted
//
//      UINT8 size
//          The size of the txBuffer
//-------------------------------------------------------------------------------------------------------

void halRfSendPacket(BYTE *txBuffer, UINT8 size) 
{
	halSpiStrobe(CC1100_SFTX);
	Dly1mS(10);
	halSpiWriteBurstReg(CC1100_TXFIFO, txBuffer, size);
	Dly1mS(10);
	halSpiStrobe(CC1100_STX);
	Dly1mS(10);
	TMR0=0; T0IF=0;
	while((halSpiReadStatus(CC1100_TXBYTES)&0x7F)!=0x00)	
	{
		Dly1mS(2);
		if(T0IF)
		{ 
			halSpiStrobe(CC1100_SIDLE);
			return ;
		}	
			
	}

	LED1=0;
	return ;
}// halRfSendPacket*/


//-------------------------------------------------------------------------------------------------------
//  BOOL halRfReceivePacket(BYTE *rxBuffer, UINT8 *length)
//
 
//  
//  ARGUMENTS:
//      BYTE *rxBuffer
//          Pointer to the buffer where the incoming data should be stored
//      UINT8 *length
//          Pointer to a variable containing the size of the buffer where the incoming data should be
//          stored. After this function returns, that variable holds the packet length.
//          
//  RETURN VALUE:
//      BOOL
//          TRUE:   CRC OK
//          FALSE:  CRC NOT OK
//-------------------------------------------------------------------------------------------------------
BYTE halRfReceivePacket(BYTE *rxBuffer, UINT8 length) 
{
    BYTE status=0;
    UINT8 packetLength;
	status = halSpiReadStatus(CC1100_RXBYTES);
	if((status & 0x7F)==0x00) 
	{
		
		if(halSpiReadStatus(CC1100_MARCSTATE)!=0x0D) halSpiStrobe(CC1100_SRX);
		return 0;
	}
	TMR0=0; T0IF=0;
	while((halSpiReadStatus(CC1100_MARCSTATE)&0x1f)!=0x01) 
	{
		
		if(T0IF)
		{ 
			halSpiStrobe(CC1100_SFRX);
			return 0;
		}
	}
    packetLength = halSpiReadReg(CC1100_RXFIFO);
    
    if (packetLength == length) {
		halSpiReadBurstReg(CC1100_RXFIFO, rxBuffer, packetLength); 
        
 //       *length = packetLength;
        halSpiStrobe(CC1100_SFRX);
        
        return 1;//(status & CRC_OK);
    } else {
 //       *length = packetLength;
		halSpiStrobe(CC1100_SFRX);
        return 0;
    }     
}// halRfReceivePacket




//-------------------------------------------------------------------------------------------------------
//  void RfWriteRfSettings()
//
//  DESCRIPTION:
//      This function is used to configure the CC1100 based on a given rf setting
//
//  ARGUMENTS:
//      
//          Pointer to a struct containing rf register settings
//-------------------------------------------------------------------------------------------------------
void halRfWriteRfSettings() 
{
	halSpiWriteReg(CC1100_FSCTRL1, 0x0C);
	halSpiWriteReg(CC1100_FSCTRL0, 0x00);
	halSpiWriteReg(CC1100_FREQ2, 0x10);
	halSpiWriteReg(CC1100_FREQ1, 0xB0);
	halSpiWriteReg(CC1100_FREQ0, 0x71);
	halSpiWriteReg(CC1100_MDMCFG4, 0xf6);//0xc6//f5
	halSpiWriteReg(CC1100_MDMCFG3, 0x83);
	halSpiWriteReg(CC1100_MDMCFG2, 0x02);
	halSpiWriteReg(CC1100_MDMCFG1, 0x22);//0x22
	halSpiWriteReg(CC1100_MDMCFG0, 0xF8);
	halSpiWriteReg(CC1100_CHANNR, 0x00);
	halSpiWriteReg(CC1100_DEVIATN, 0x15);//0x30
	halSpiWriteReg(CC1100_FREND1, 0x56);
	halSpiWriteReg(CC1100_FREND0, 0x10);
	halSpiWriteReg(CC1100_MCSM1, 0x00);
	halSpiWriteReg(CC1100_MCSM0, 0x18);
	halSpiWriteReg(CC1100_FOCCFG, 0x15);
	halSpiWriteReg(CC1100_BSCFG, 0x6C);
	halSpiWriteReg(CC1100_AGCCTRL2, 0x03);
	halSpiWriteReg(CC1100_AGCCTRL0, 0x91);
	halSpiWriteReg(CC1100_FSCAL3, 0xA9);
	halSpiWriteReg(CC1100_FSCAL2, 0x2A);
	halSpiWriteReg(CC1100_FSCAL0, 0x0D);
	halSpiWriteReg(CC1100_FSTEST, 0x59);
	halSpiWriteReg(CC1100_TEST2, 0x86);
	halSpiWriteReg(CC1100_TEST1, 0x3D);
	halSpiWriteReg(CC1100_TEST0, 0x09);
	halSpiWriteReg(CC1100_IOCFG2, 0x24);
	halSpiWriteReg(CC1100_IOCFG0, 0x06);
	halSpiWriteReg(CC1100_PKTCTRL1, 0x04);
	halSpiWriteReg(CC1100_PKTCTRL0, 0x05);
	halSpiWriteReg(CC1100_ADDR, 0x00);
	halSpiWriteReg(CC1100_PKTLEN, 0xFF);
   

}

//----------------------------------------------------------
BYTE spiGetRxTxStatus(void) 
{
	unsigned char RxTxstatus;
    P_CSn = 0;
    while (P_SO);
	RxTxstatus=SPI_write(CC1100_SNOP);
	P_SCLK=0;
	P_SI=0;
	P_CSn=1;
    return(RxTxstatus);
} 

//-------------------------------------------------------------
void POWER_UP_RESET_CC1100() {
	unsigned char i; 
	halSpiStrobe(CC1100_SIDLE);
	P_CSn=1;
	for(i=0;i<5;i++);  
	P_CSn=0;
	for(i=0;i<5;i++);  	 
	P_CSn=1;
	for(i=0;i<200;i++);  
	P_CSn=0;
	while(P_SO);
	halSpiStrobe(CC1100_SRES);
	P_CSn=1;
	P_SCLK=0;
	P_SI=0;
}