⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 nios-io.h

📁 F:worksip2440a board可启动u-boot-like.tar.gz F:worksip2440a board可启动u-boot-like.tar.gz
💻 H
字号:
/* * (C) Copyright 2003, Psyent Corporation <www.psyent.com> * Scott McNutt <smcnutt@psyent.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//************************************************************************* * Altera Nios Standard Peripherals ************************************************************************/#ifndef __NIOSIO_H__#define __NIOSIO_H__/*------------------------------------------------------------------------ * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf) *----------------------------------------------------------------------*/typedef volatile struct nios_uart_t {	unsigned	rxdata;		/* Rx data reg */	unsigned	txdata;		/* Tx data reg */	unsigned	status;		/* Status reg */	unsigned	control;	/* Control reg */	unsigned	divisor;	/* Baud rate divisor reg */	unsigned	endofpacket;	/* End-of-packet reg */}nios_uart_t;/* status register */#define NIOS_UART_PE		(1 << 0)	/* parity error */#define NIOS_UART_FE		(1 << 1)	/* frame error */#define NIOS_UART_BRK		(1 << 2)	/* break detect */#define NIOS_UART_ROE		(1 << 3)	/* rx overrun */#define NIOS_UART_TOE		(1 << 4)	/* tx overrun */#define NIOS_UART_TMT		(1 << 5)	/* tx empty */#define NIOS_UART_TRDY		(1 << 6)	/* tx ready */#define NIOS_UART_RRDY		(1 << 7)	/* rx ready */#define NIOS_UART_E		(1 << 8)	/* exception */#define NIOS_UART_DCTS		(1 << 10)	/* cts change */#define NIOS_UART_CTS		(1 << 11)	/* cts */#define NIOS_UART_EOP		(1 << 12)	/* eop detected *//* control register */#define NIOS_UART_IPE		(1 << 0)	/* parity error int ena*/#define NIOS_UART_IFE		(1 << 1)	/* frame error int ena */#define NIOS_UART_IBRK		(1 << 2)	/* break detect int ena */#define NIOS_UART_IROE		(1 << 3)	/* rx overrun int ena */#define NIOS_UART_ITOE		(1 << 4)	/* tx overrun int ena */#define NIOS_UART_ITMT		(1 << 5)	/* tx empty int ena */#define NIOS_UART_ITRDY		(1 << 6)	/* tx ready int ena */#define NIOS_UART_IRRDY		(1 << 7)	/* rx ready int ena */#define NIOS_UART_IE		(1 << 8)	/* exception int ena */#define NIOS_UART_TBRK		(1 << 9)	/* transmit break */#define NIOS_UART_IDCTS		(1 << 10)	/* cts change int ena */#define NIOS_UART_RTS		(1 << 11)	/* rts */#define NIOS_UART_IEOP		(1 << 12)	/* eop detected int ena *//*------------------------------------------------------------------------ * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf) *----------------------------------------------------------------------*/typedef volatile struct nios_timer_t {	unsigned	status;			/* Timer status reg */	unsigned	control;		/* Timer control reg */	unsigned	periodl;		/* Timeout period low */	unsigned	periodh;		/* Timeout period high */	unsigned	snapl;			/* Snapshot low */	unsigned	snaph;			/* Snapshot high */}nios_timer_t;/* status register */#define NIOS_TIMER_TO		(1 << 0)	/* Timeout */#define NIOS_TIMER_RUN		(1 << 1)	/* Timer running *//* control register */#define NIOS_TIMER_ITO		(1 << 0)	/* Timeout int ena */#define NIOS_TIMER_CONT		(1 << 1)	/* Continuous mode */#define NIOS_TIMER_START	(1 << 2)	/* Start timer */#define NIOS_TIMER_STOP		(1 << 3)	/* Stop timer *//*------------------------------------------------------------------------ * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf) *----------------------------------------------------------------------*/typedef volatile struct nios_pio_t {	unsigned int	data;		/* Data value at each PIO in/out */	unsigned int	direction;	/* Data direct. for each PIO bit */	unsigned int	interruptmask;	/* Per-bit IRQ enable/disable */	unsigned int	edgecapture;	/* Per-bit sync. edge detect & hold */}nios_pio_t;/* direction register */#define NIOS_PIO_OUT		(1)		/* PIO bit is output */#define NIOS_PIO_IN		(0)		/* PIO bit is input *//*------------------------------------------------------------------------ * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf) *----------------------------------------------------------------------*/typedef volatile struct nios_spi_t {	unsigned	rxdata;		/* Rx data reg */	unsigned	txdata;		/* Tx data reg */	unsigned	status;		/* Status reg */	unsigned	control;	/* Control reg */	unsigned	reserved;	/* (master only) */	unsigned	slaveselect;	/* SPI slave select mask (master only) */}nios_spi_t;/* status register */#define NIOS_SPI_ROE		(1 << 3)	/* rx overrun */#define NIOS_SPI_TOE		(1 << 4)	/* tx overrun */#define NIOS_SPI_TMT		(1 << 5)	/* tx empty */#define NIOS_SPI_TRDY		(1 << 6)	/* tx ready */#define NIOS_SPI_RRDY		(1 << 7)	/* rx ready */#define NIOS_SPI_E		(1 << 8)	/* exception *//* control register */#define NIOS_SPI_IROE		(1 << 3)	/* rx overrun int ena */#define NIOS_SPI_ITOE		(1 << 4)	/* tx overrun int ena */#define NIOS_SPI_ITRDY		(1 << 6)	/* tx ready int ena */#define NIOS_SPI_IRRDY		(1 << 7)	/* rx ready int ena */#define NIOS_SPI_IE		(1 << 8)	/* exception int ena */#define NIOS_SPI_SSO		(1 << 10)	/* override SS_n output *//*------------------------------------------------------------------------ * ASMI *----------------------------------------------------------------------*/typedef volatile struct nios_asmi_t {	unsigned	rxdata;		/* Rx data reg */	unsigned	txdata;		/* Tx data reg */	unsigned	status;		/* Status reg */	unsigned	control;	/* Control reg */	unsigned	reserved;	unsigned	slavesel;	/* Slave select */	unsigned	endofpacket;	/* End-of-packet reg */}nios_asmi_t;/* status register */#define NIOS_ASMI_ROE		(1 << 3)	/* rx overrun */#define NIOS_ASMI_TOE		(1 << 4)	/* tx overrun */#define NIOS_ASMI_TMT		(1 << 5)	/* tx empty */#define NIOS_ASMI_TRDY		(1 << 6)	/* tx ready */#define NIOS_ASMI_RRDY		(1 << 7)	/* rx ready */#define NIOS_ASMI_E		(1 << 8)	/* exception */#define NIOS_ASMI_EOP		(1 << 9)	/* eop detected *//* control register */#define NIOS_ASMI_IROE		(1 << 3)	/* rx overrun int ena */#define NIOS_ASMI_ITOE		(1 << 4)	/* tx overrun int ena */#define NIOS_ASMI_ITRDY		(1 << 6)	/* tx ready int ena */#define NIOS_ASMI_IRRDY		(1 << 7)	/* rx ready int ena */#define NIOS_ASMI_IE		(1 << 8)	/* exception int ena */#define NIOS_ASMI_IEOP		(1 << 9)	/* rx eop int ena */#define NIOS_ASMI_SSO		(1 << 10)	/* slave select enable *//*------------------------------------------------------------------------ * JTAG UART *----------------------------------------------------------------------*/typedef volatile struct nios_jtag_t {	unsigned short	rxcntl;			/* Rx data/cntl reg */	unsigned short	txcntl;			/* Tx data/cntl reg */	unsigned short	errcntl;		/* Err dta/cntl reg */}nios_jtag_t;/* status register */#define NIOS_JTAG_TRDY		(1 << 8)	/* tx ready bit */#define NIOS_JTAG_RRDY		(1 << 8)	/* rx ready bit */#endif /* __NIOSIO_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -