⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 F:worksip2440a board可启动u-boot-like.tar.gz F:worksip2440a board可启动u-boot-like.tar.gz
💻 C
字号:
/* * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Andreas Heppel <aheppel@sysgo.de> * * (C) Copyright 2002, 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//* * PCI routines */#include <common.h>#ifdef CONFIG_PCI#include <command.h>#include <asm/processor.h>#include <asm/io.h>#include <pci.h>#ifdef DEBUG#define DEBUGF(x...) printf(x)#else#define DEBUGF(x...)#endif /* DEBUG *//* * */#define PCI_HOSE_OP(rw, size, type)					\int pci_hose_##rw##_config_##size(struct pci_controller *hose, 		\				  pci_dev_t dev, 			\				  int offset, type value)		\{									\	return hose->rw##_##size(hose, dev, offset, value);		\}PCI_HOSE_OP(read, byte, u8 *)PCI_HOSE_OP(read, word, u16 *)PCI_HOSE_OP(read, dword, u32 *)PCI_HOSE_OP(write, byte, u8)PCI_HOSE_OP(write, word, u16)PCI_HOSE_OP(write, dword, u32)#define PCI_OP(rw, size, type, error_code)				\int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value)	\{									\	struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev));	\									\	if (!hose)							\	{								\		error_code;						\		return -1;						\	}								\									\	return pci_hose_##rw##_config_##size(hose, dev, offset, value);	\}PCI_OP(read, byte, u8 *, *value = 0xff)PCI_OP(read, word, u16 *, *value = 0xffff)PCI_OP(read, dword, u32 *, *value = 0xffffffff)PCI_OP(write, byte, u8, )PCI_OP(write, word, u16, )PCI_OP(write, dword, u32, )#define PCI_READ_VIA_DWORD_OP(size, type, off_mask)			\int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\					pci_dev_t dev, 			\					int offset, type val)		\{									\	u32 val32;							\									\	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\		return -1;						\									\	*val = (val32 >> ((offset & (int)off_mask) * 8));		\									\	return 0;							\}#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask)		\int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\					     pci_dev_t dev, 		\					     int offset, type val)	\{									\	u32 val32, mask, ldata, shift;					\									\	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\		return -1;						\									\	shift = ((offset & (int)off_mask) * 8);				\	ldata = (((unsigned long)val) & val_mask) << shift;		\	mask = val_mask << shift;					\	val32 = (val32 & ~mask) | ldata;				\									\	if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\		return -1;						\									\	return 0;							\}PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)/* * */static struct pci_controller* hose_head = NULL;void pci_register_hose(struct pci_controller* hose){	struct pci_controller **phose = &hose_head;	while(*phose)		phose = &(*phose)->next;	hose->next = NULL;	*phose = hose;}struct pci_controller *pci_bus_to_hose (int bus){	struct pci_controller *hose;	for (hose = hose_head; hose; hose = hose->next)		if (bus >= hose->first_busno && bus <= hose->last_busno)			return hose;	return NULL;}pci_dev_t pci_find_devices(struct pci_device_id *ids, int index){	struct pci_controller * hose;	u16 vendor, device;	u8 header_type;	pci_dev_t bdf;	int i, bus, found_multi = 0;	for (hose = hose_head; hose; hose = hose->next)	{#ifdef CFG_SCSI_SCAN_BUS_REVERSE		for (bus = hose->last_busno; bus >= hose->first_busno; bus--)#else		for (bus = hose->first_busno; bus <= hose->last_busno; bus++)#endif			for (bdf = PCI_BDF(bus,0,0);#ifdef CONFIG_ELPPC			     bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);#else			     bdf < PCI_BDF(bus+1,0,0);#endif			     bdf += PCI_BDF(0,0,1))			{				if (!PCI_FUNC(bdf)) {					pci_read_config_byte(bdf,							     PCI_HEADER_TYPE,							     &header_type);					found_multi = header_type & 0x80;				} else {					if (!found_multi)						continue;				}				pci_read_config_word(bdf,						     PCI_VENDOR_ID,						     &vendor);				pci_read_config_word(bdf,						     PCI_DEVICE_ID,						     &device);				for (i=0; ids[i].vendor != 0; i++)					if (vendor == ids[i].vendor &&					    device == ids[i].device)					{						if (index <= 0)							return bdf;						index--;					}			}	}	return (-1);}pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index){	static struct pci_device_id ids[2] = {{}, {0, 0}};	ids[0].vendor = vendor;	ids[0].device = device;	return pci_find_devices(ids, index);}/* * */unsigned long pci_hose_phys_to_bus (struct pci_controller *hose,				    unsigned long phys_addr,				    unsigned long flags){	struct pci_region *res;	unsigned long bus_addr;	int i;	if (!hose) {		printf ("pci_hose_phys_to_bus: %s\n", "invalid hose");		goto Done;	}	for (i = 0; i < hose->region_count; i++) {		res = &hose->regions[i];		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)			continue;		bus_addr = phys_addr - res->phys_start + res->bus_start;		if (bus_addr >= res->bus_start &&			bus_addr < res->bus_start + res->size) {			return bus_addr;		}	}	printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address");Done:	return 0;}unsigned long pci_hose_bus_to_phys(struct pci_controller* hose,				   unsigned long bus_addr,				   unsigned long flags){	struct pci_region *res;	int i;	if (!hose) {		printf ("pci_hose_bus_to_phys: %s\n", "invalid hose");		goto Done;	}	for (i = 0; i < hose->region_count; i++) {		res = &hose->regions[i];		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)			continue;		if (bus_addr >= res->bus_start &&			bus_addr < res->bus_start + res->size) {			return bus_addr - res->bus_start + res->phys_start;		}	}	printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address");Done:	return 0;}/* * */int pci_hose_config_device(struct pci_controller *hose,			   pci_dev_t dev,			   unsigned long io,			   unsigned long mem,			   unsigned long command){	unsigned int bar_response, bar_size, bar_value, old_command;	unsigned char pin;	int bar, found_mem64;	DEBUGF ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n",		io, mem, command);	pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);	for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) {		pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);		pci_hose_read_config_dword (hose, dev, bar, &bar_response);		if (!bar_response)			continue;		found_mem64 = 0;		/* Check the BAR type and set our address mask */		if (bar_response & PCI_BASE_ADDRESS_SPACE) {			bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;			/* round up region base address to a multiple of size */			io = ((io - 1) | (bar_size - 1)) + 1;			bar_value = io;			/* compute new region base address */			io = io + bar_size;		} else {			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==				PCI_BASE_ADDRESS_MEM_TYPE_64)				found_mem64 = 1;			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;			/* round up region base address to multiple of size */			mem = ((mem - 1) | (bar_size - 1)) + 1;			bar_value = mem;			/* compute new region base address */			mem = mem + bar_size;		}		/* Write it out and update our limit */		pci_hose_write_config_dword (hose, dev, bar, bar_value);		if (found_mem64) {			bar += 4;			pci_hose_write_config_dword (hose, dev, bar, 0x00000000);		}	}	/* Configure Cache Line Size Register */	pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08);	/* Configure Latency Timer */	pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80);	/* Disable interrupt line, if device says it wants to use interrupts */	pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin);	if (pin != 0) {		pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff);	}	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command);	pci_hose_write_config_dword (hose, dev, PCI_COMMAND,				     (old_command & 0xffff0000) | command);	return 0;}/* * */struct pci_config_table *pci_find_config(struct pci_controller *hose,					 unsigned short class,					 unsigned int vendor,					 unsigned int device,					 unsigned int bus,					 unsigned int dev,					 unsigned int func){	struct pci_config_table *table;	for (table = hose->config_table; table && table->vendor; table++) {		if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&		    (table->device == PCI_ANY_ID || table->device == device) &&		    (table->class  == PCI_ANY_ID || table->class  == class)  &&		    (table->bus    == PCI_ANY_ID || table->bus    == bus)    &&		    (table->dev    == PCI_ANY_ID || table->dev    == dev)    &&		    (table->func   == PCI_ANY_ID || table->func   == func)) {			return table;		}	}	return NULL;}void pci_cfgfunc_config_device(struct pci_controller *hose,			       pci_dev_t dev,			       struct pci_config_table *entry){	pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]);}void pci_cfgfunc_do_nothing(struct pci_controller *hose,			    pci_dev_t dev, struct pci_config_table *entry){}/* * *//* HJF: Changed this to return int. I think this is required * to get the correct result when scanning bridges */extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);extern void pciauto_config_init(struct pci_controller *hose);int pci_hose_scan_bus(struct pci_controller *hose, int bus){	unsigned int sub_bus, found_multi=0;	unsigned short vendor, device, class;	unsigned char header_type;	struct pci_config_table *cfg;	pci_dev_t dev;	sub_bus = bus;	for (dev =  PCI_BDF(bus,0,0);	     dev <  PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);	     dev += PCI_BDF(0,0,1))	{		/* Skip our host bridge */		if ( dev == PCI_BDF(hose->first_busno,0,0) ) {#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE)              /* don't skip host bridge */			/*			 * Only skip hostbridge configuration if "pciconfighost" is not set			 */			if (getenv("pciconfighost") == NULL) {				continue; /* Skip our host bridge */			}#else			continue; /* Skip our host bridge */#endif		}		if (PCI_FUNC(dev) && !found_multi)			continue;		pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);		pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);		if (vendor != 0xffff && vendor != 0x0000) {			if (!PCI_FUNC(dev))				found_multi = header_type & 0x80;			DEBUGF("PCI Scan: Found Bus %d, Device %d, Function %d\n",			    PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );			pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);			pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);			cfg = pci_find_config(hose, class, vendor, device,					      PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));			if (cfg) {				cfg->config_device(hose, dev, cfg);#ifdef CONFIG_PCI_PNP			} else {				int n = pciauto_config_device(hose, dev);				sub_bus = max(sub_bus, n);#endif			}			if (hose->fixup_irq)				hose->fixup_irq(hose, dev);#ifdef CONFIG_PCI_SCAN_SHOW			/* Skip our host bridge */			if ( dev != PCI_BDF(hose->first_busno,0,0) ) {			    unsigned char int_line;			    pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,						      &int_line);			    printf("        %02x  %02x  %04x  %04x  %04x  %02x\n",				   PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,				   int_line);			}#endif		}	}	return sub_bus;}int pci_hose_scan(struct pci_controller *hose){#ifdef CONFIG_PCI_PNP	pciauto_config_init(hose);#endif	return pci_hose_scan_bus(hose, hose->first_busno);}void pci_init(void){#if defined(CONFIG_PCI_BOOTDELAY)	char *s;	int i;	/* wait "pcidelay" ms (if defined)... */	s = getenv ("pcidelay");	if (s) {		int val = simple_strtoul (s, NULL, 10);		for (i=0; i<val; i++)			udelay (1000);	}#endif /* CONFIG_PCI_BOOTDELAY */	/* now call board specific pci_init()... */	pci_init_board();}#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -