changelog

pthread source code,you can compile directly

2005-05-13  Ross Johnson  <ross at callisto.canberra.edu.au>

	* pthread_kill.c (pthread_kill): Remove check for Win32 thread
	priority (to confirm HANDLE validity). Useless since thread HANDLEs
	a not recycle-unique.

2005-05-30  Vladimir Kliatchko  <vladimir at kliatchko.com>

	* pthread_once.c: Re-implement using an MCS queue-based lock. The form
	of pthread_once is as proposed by Alexander Terekhov (see entry of
	2005-03-13). The MCS lock implementation does not require a unique
	'name' to identify the lock between threads. Attempts to get the Event
	or Semaphore based versions of pthread_once to a satisfactory level
	of robustness have thus far failed. The last problem (avoiding races
	involving non recycle-unique Win32 HANDLEs) was giving everyone
	grey hair trying to solve it.

	* ptw32_MCS_lock.c: New MCS queue-based lock implementation. These
	locks are efficient: they have very low overhead in the uncontended case;
	are efficient in contention and minimise cache-coherence updates in
	managing the user level FIFO queue; do not require an ABI change in the
	library.

2005-05-27  Alexander Gottwald <alexander.gottwald at s1999.tu-chemnitz.de>

	* pthread.h: Some things, like HANDLE, were only defined if
	PTW32_LEVEL was >= 3. They should always be defined.

2005-05-25  Vladimir Kliatchko  <vladimir at kliatchko.com>

	* pthread_once.c: Eliminate all priority operations and other
	complexity by replacing the event with a semaphore. The advantage
	of the change is the ability to release just one waiter if the
	init_routine thread is cancelled yet still release all waiters when
	done. Simplify once_control state checks to improve efficiency
	further.

2005-05-24  Mikael Magnusson  <mikaelmagnusson at glocalnet.net>

	* GNUmakefile: Patched to allow cross-compile with mingw32 on Linux.
	It uses macros instead of referencing dlltool, gcc and g++ directly;
	added a call to ranlib. For example the GC static library can be
	built with:
	make CC=i586-mingw32msvc-gcc RC=i586-mingw32msvc-windres \
	RANLIB=i586-mingw32msvc-ranlib clean GC-static

2005-05-13  Ross Johnson  <ross at callisto.canberra.edu.au>

	* pthread_win32_attach_detach_np.c (pthread_win32_thread_detach_np):
	Move on-exit-only stuff from ptw32_threadDestroy() to here.
	* ptw32_threadDestroy.c: It's purpose is now only to reclaim thread
	resources for detached threads, or via pthread_join() or
	pthread_detach() on joinable threads.
	* ptw32_threadStart.c: Calling user destruct routines has moved to
	pthread_win32_thread_detach_np(); call pthread_win32_thread_detach_np()
	directly if statically linking, otherwise do so via dllMain; store
	thread return value in thread struct for all cases, including
	cancellation and exception exits; thread abnormal exits	go via
	pthread_win32_thread_detach_np.
	* pthread_join.c (pthread_join): Don't try to get return code from
	Win32 thread - always get it from he thread struct.
	* pthread_detach.c (pthread_detach): reduce extent of the thread
	existence check since we now don't care if the Win32 thread HANDLE has
	been closed; reclaim thread resources if the thread has exited already.
	* ptw32_throw.c (ptw32_throw): For Win32 threads that are not implicit,
	only Call thread cleanup if statically linking, otherwise leave it to
	dllMain.
	* sem_post.c (_POSIX_SEM_VALUE_MAX): Change to SEM_VALUE_MAX.
	* sem_post_multiple.c: Likewise.
	* sem_init.c: Likewise.

2005-05-10  Ross Johnson  <ross at callisto.canberra.edu.au>

	* pthread_join.c (pthread_join): Add missing check for thread ID
	reference count in thread existence test; reduce extent of the
	existence test since we don't care if the Win32 thread HANDLE has
	been closed.

2005-05-09  Ross Johnson  <ross at callisto.canberra.edu.au>

	* ptw32_callUserDestroyRoutines.c: Run destructor process (i.e.
	loop over all keys calling destructors) up to
	PTHREAD_DESTRUCTOR_ITERATIONS times if TSD value isn't NULL yet;
	modify assoc management.
	* pthread_key_delete.c: Modify assoc management.
	* ptw32_tkAssocDestroy.c: Fix error in assoc removal from chains.
	* pthread.h
	(_POSIX_THREAD_DESTRUCTOR_ITERATIONS): Define to value specified by
	POSIX.
	(_POSIX_THREAD_KEYS_MAX): Define to value specified by POSIX.
	(PTHREAD_KEYS_MAX): Redefine [upward] to minimum required by POSIX.
	(SEM_NSEMS_MAX): Define to implementation value.
	(SEM_VALUE_MAX): Define to implementation value.
	(_POSIX_SEM_NSEMS_MAX): Redefine to value specified by POSIX.
	(_POSIX_SEM_VALUE_MAX): Redefine to value specified by POSIX.

2005-05-06  Ross Johnson  <ross at callisto.canberra.edu.au>

	* signal.c (sigwait): Add a cancellation point to this otherwise
	no-op.
	* sem_init.c (sem_init): Check for and return ERANGE error.
	* sem_post.c (sem_post): Likewise.
	* sem_post_multiple.c (sem_post_multiple): Likewise.
	* manual (directory): Added; see ChangeLog inside.

2005-05-02  Ross Johnson  <ross at callisto.canberra.edu.au>

	* implement.h (struct pthread_key_t_): Change threadsLock to keyLock
	so as not to be confused with the per thread lock 'threadlock';
	change all references to it.
	* implement.h (struct ThreadKeyAssoc): Remove lock; add prevKey
	and prevThread pointers; re-implemented all routines that use this
	struct. The effect of this is to save one handle per association,
	which could potentially equal the number of keys multiplied by the
	number of threads, accumulating over time - and to free the
	association memory as soon as it is no longer referenced by either
	the key or the thread. Previously, the handle and memory were
	released only after BOTH key and thread no longer referenced the
	association. That is, often no association resources were released
	until the process itself exited. In addition, at least one race
	condition has been removed - where two threads could attempt to
	release the association resources simultaneously - one via
	ptw32_callUserDestroyRoutines and the other via
	pthread_key_delete.
	- thanks to Richard Hughes at Aculab for discovering the problem.
	* pthread_key_create.c: See above.
	* pthread_key_delete.c: See above.
	* pthread_setspecific.c: See above.
	* ptw32_callUserDestroyRoutines.c: See above.
	* ptw32_tkAssocCreate.c: See above.
	* ptw32_tkAssocDestroy.c: See above.

2005-04-27  Ross Johnson  <ross at callisto.canberra.edu.au>

	* sem_wait.c (ptw32_sem_wait_cleanup): after cancellation re-attempt
	to acquire the semaphore to avoid a race with a late sem_post.
	* sem_timedwait.c: Modify comments.

2005-04-25  Ross Johnson  <ross at callisto.canberra.edu.au>

	* ptw32_relmillisecs.c: New module; converts future abstime to 
	milliseconds relative to 'now'.
	* pthread_mutex_timedlock.c: Use new ptw32_relmillisecs routine in
	place of internal code; remove the NEED_SEM code - this routine is now
	implemented for builds that define NEED_SEM (WinCE etc)
	* sem_timedwait.c: Likewise; after timeout or cancellation,
	re-attempt to acquire the semaphore in case one has been posted since
	the timeout/cancel occurred. Thanks to Stefan Mueller.
	* Makefile: Add ptw32_relmillisecs.c module; remove
	ptw32_{in,de}crease_semaphore.c modules.
	* GNUmakefile: Likewise.
	* Bmakefile: Likewise.

	* sem_init.c: Re-write the NEED_SEM code to be consistent with the
	non-NEED_SEM code, but retaining use of an event in place of the w32 sema
	for w32 systems that don't include semaphores (WinCE);
	the NEED_SEM versions of semaphores has been broken for a long time but is
	now fixed and supports all of the same routines as the non-NEED_SEM case.
	* sem_destroy.c: Likewise.
	* sem_wait.c: Likewise.
	* sem_post.c: Likewise.
	* sem_post_multple.c: Likewise.
	* implement.h: Likewise.
	* sem_timedwait.c: Likewise; this routine is now
	implemented for builds that define NEED_SEM (WinCE etc).
	* sem_trywait.c: Likewise.
	* sem_getvalue.c: Likewise.

	* pthread_once.c: Yet more changes, reverting closer to Gottlob Frege's
	first design, but retaining cancellation, priority boosting, and adding
	preservation of W32 error codes to make pthread_once transparent to
	GetLastError.

2005-04-11  Ross Johnson  <ross at callisto.canberra.edu.au>

	* pthread_once.c (pthread_once): Added priority boosting to
	solve starvation problem after once_routine cancellation.
	See notes in file.

2005-04-06  Kevin Lussier <Kevin at codegreennetworks.com>

	* Makefile: Added debug targets for all versions of the library.

2005-04-01  Ross Johnson  <ross at callisto.canberra.edu.au>

	* GNUmakefile: Add target to build libpthreadGC1.a as a static link
	library.
	* Makefile: Likewise for pthreadGC1.lib.

2005-04-01  Kevin Lussier <Kevin at codegreennetworks.com>

	* sem_timedwait.c (sem_timedwait): Increase size of temp variables to
	avoid int overflows for large timeout values.
	* implement.h (int64_t): Include or define.

2005-03-31   Dimitar Panayotov <develop at mail.bg>^M

	* pthread.h: Fix conditional defines for static linking.
	* sched.h: Liekwise.
	* semaphore.h: Likewise.
	* dll.c (PTW32_STATIC_LIB): Module is conditionally included
	in the build.

2005-03-16  Ross Johnson  <ross at callisto.canberra.edu.au>^M

	* pthread_setcancelstate.c: Undo the last change.

2005-03-16  Ross Johnson  <ross at callisto.canberra.edu.au>^M

	* pthread_setcancelstate.c: Don't check for an async cancel event
	if the library is using alertable async cancel..

2005-03-14  Ross Johnson  <ross at callisto.canberra.edu.au>

	* pthread_once.c (pthread_once): Downgrade interlocked operations to simple
	memory operations where these are protected by the critical section; edit
	comments.

2005-03-13  Ross Johnson  <rpj at callisto.canberra.edu.au>

	* pthread_once.c (pthread_once): Completely redesigned; a change was
	required to the ABI (pthread_once_t_), and resulting in a version
	compatibility index increment.

	NOTES:
	The design (based on pseudo code contributed by Gottlob Frege) avoids
	creating a kernel object if there is no contention. See URL for details:-
	http://sources.redhat.com/ml/pthreads-win32/2005/msg00029.html
	This uses late initialisation similar to the technique already used for
	pthreads-win32 mutexes and semaphores (from Alexander Terekhov).

	The subsequent cancelation cleanup additions (by rpj) could not be implemented
	without sacrificing some of the efficiency in Gottlob's design. In particular,
	although each once_control uses it's own event to block on, a global CS is
	required to manage it - since the event must be either re-usable or
	re-creatable under cancelation. This is not needed in the non-cancelable
	design because it is able to mark the event as closed (forever).

	When uncontested, a CS operation is equivalent to an Interlocked operation
	in speed. So, in the final design with cancelability, an uncontested
	once_control operation involves a minimum of five interlocked operations
	(including the LeaveCS operation).
	
	ALTERNATIVES:
	An alternative design from Alexander Terekhov proposed using a named mutex,
	as sketched below:-

	  if (!once_control) { // May be in TLS
	    named_mutex::guard guard(&once_control2);
	      if (!once_control2) {
	         <init>
	         once_control2 = true;
	      }
	    once_control = true;
	  }
	
	A more detailed description of this can be found here:-
	http://groups.yahoo.com/group/boost/message/15442

	[Although the definition of a suitable PTHREAD_ONCE_INIT precludes use of the
	TLS located flag, this is not critical.]
	
	There are three primary concerns though:-
	1) The [named] mutex is 'created' even in the uncontended case.
	2) A system wide unique name must be generated.
	3) Win32 mutexes are VERY slow even in the uncontended 	case. An uncontested
	Win32 mutex lock operation can be 50 (or more) times slower than an
	uncontested EnterCS operation.

	Ultimately, the named mutex trick is making use of the global locks maintained
	by the kernel.

	* pthread.h (pthread_once_t_): One flag and an event HANDLE added.
	(PTHREAD_ONCE_INIT): Additional values included.

2005-03-08  Ross Johnson  <rpj at callisto.canberra.edu.au>

	* pthread_once.c (pthread_once): Redesigned to elliminate potential
	starvation problem.
	- reported by Gottlob Frege  <gottlobfrege at gmail.com>

	* ptw32_threadDestroy.c (ptw32_threadDestroy): Implicit threads were
	not closing their Win32 thread duplicate handle.
	- reported by Dmitrii Semii <bogolt at gmail.com>

2005-01-25  Ralf Kubis  <RKubis at mc.com>

	* Attempted acquisition of recursive mutex was causing waiting
	threads to not be woken when the mutex is released.

	* GNUmakefile (GCE): Generate correct version resource comments.

2005-01-01  Konstantin Voronkov  <beowinkle at yahoo.com>

	* pthread_mutex_lock.c (pthread_mutex_lock): The new atomic exchange
	mutex algorithm is known to allow a thread to steal the lock off
	FIFO waiting threads. The next waiting FIFO thread gets a spurious
	wake-up and must attempt to re-acquire the lock. The woken thread
	was setting itself as the mutex's owner before the re-acquisition.

2004-11-22  Ross Johnson  <rpj at callisto.canberra.edu.au>

	* pthread_cond_wait.c (ptw32_cond_wait_cleanup): Undo change
	from 2004-11-02.
	* Makefile (DLL_VER): Added for DLL naming suffix - see README.
	* GNUmakefile (DLL_VER): Likewise.
	* Wmakefile (DLL_VER): Likewise.
	* Bmakefile (DLL_VER): Likewise.
	* pthread.dsw (version.rc): Added to MSVS workspace.

2004-11-20  Boudewijn Dekker  <b.dekker at ellipsis.nl>

	* pthread_getspecific.c (pthread_getspecific): Check for
	invalid (NULL) key argument.

2004-11-19  Ross Johnson  <rpj at callisto.canberra.edu.au>