📄 yimaqi.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 1: 3.3V
-- Bank 2: 3.3V
-- Bank 3: 3.3V
-- Bank 4: 3.3V
-- Bank 5: 3.3V
-- Bank 6: 3.3V
-- Bank 7: 3.3V
-- Bank 8: 3.3V
-- Bank 9: 3.3V
-- Bank 10: 3.3V
-- Bank 11: 3.3V
-- Bank 12: 3.3V
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
---------------------------------------------------------------------------------
Quartus II Version 4.1 Build 181 06/29/2004 SJ Full Version
CHIP "YIMAQI" ASSIGNED TO AN: EP1S10F484C5
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
VCCINT : A1 : power : : 1.5V : :
GND : A2 : gnd : : : 1 :
VCCIO4 : A3 : power : : 3.3V : 4 :
GND* : A4 : : : : 4 :
GND* : A5 : : : : 4 :
GND* : A6 : : : : 4 :
GND* : A7 : : : : 4 :
GND* : A8 : : : : 4 :
GND : A9 : gnd : : : 1 :
VCCIO4 : A10 : power : : 3.3V : 4 :
GND+ : A11 : : : : 4 :
GND* : A12 : : : : 9 :
VCCIO3 : A13 : power : : 3.3V : 3 :
GND : A14 : gnd : : : 1 :
GND* : A15 : : : : 3 :
GND* : A16 : : : : 3 :
GND* : A17 : : : : 3 :
GND* : A18 : : : : 3 :
GND* : A19 : : : : 3 :
VCCIO3 : A20 : power : : 3.3V : 3 :
GND : A21 : gnd : : : 1 :
VCCINT : A22 : power : : 1.5V : :
GND : AA1 : gnd : : : 1 :
x[5] : AA2 : input : LVTTL : : 7 : N
x[4] : AA3 : input : LVTTL : : 7 : N
x[1] : AA4 : input : LVTTL : : 7 : N
GND* : AA5 : : : : 7 :
GND* : AA6 : : : : 7 :
GND* : AA7 : : : : 7 :
GND* : AA8 : : : : 7 :
NC : AA9 : : : : 1 :
NC : AA10 : : : : 1 :
GND+ : AA11 : : : : 7 :
GND* : AA12 : : : : 11 :
GND* : AA13 : : : : 11 :
GND+ : AA14 : : : : 8 :
GND* : AA15 : : : : 8 :
GND* : AA16 : : : : 8 :
GND* : AA17 : : : : 8 :
GND* : AA18 : : : : 8 :
GND* : AA19 : : : : 8 :
GND* : AA20 : : : : 8 :
GND* : AA21 : : : : 8 :
GND : AA22 : gnd : : : 1 :
VCCINT : AB1 : power : : 1.5V : :
GND : AB2 : gnd : : : 1 :
VCCIO7 : AB3 : power : : 3.3V : 7 :
y[1] : AB4 : output : LVTTL : : 7 : N
GND* : AB5 : : : : 7 :
GND* : AB6 : : : : 7 :
GND* : AB7 : : : : 7 :
GND* : AB8 : : : : 7 :
GND : AB9 : gnd : : : 1 :
VCCIO7 : AB10 : power : : 3.3V : 7 :
GND+ : AB11 : : : : 7 :
GND* : AB12 : : : : 11 :
VCCIO8 : AB13 : power : : 3.3V : 8 :
GND : AB14 : gnd : : : 1 :
GND* : AB15 : : : : 8 :
GND* : AB16 : : : : 8 :
GND* : AB17 : : : : 8 :
GND* : AB18 : : : : 8 :
GND* : AB19 : : : : 8 :
VCCIO8 : AB20 : power : : 3.3V : 8 :
GND : AB21 : gnd : : : 1 :
VCCINT : AB22 : power : : 1.5V : :
GND : B1 : gnd : : : 1 :
GND* : B2 : : : : 4 :
GND* : B3 : : : : 4 :
GND* : B4 : : : : 4 :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -