⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 constants.h

📁 SyncML手册及其编程
💻 H
📖 第 1 页 / 共 2 页
字号:
#ifndef OBEXCONSTANTS_H#define OBEXCONSTANTS_H/* * Copyright Notice * Copyright (c) Ericsson, IBM, Lotus, Matsushita Communication  * Industrial Co., Ltd., Motorola, Nokia, Openwave Systems, Inc.,  * Palm, Inc., Psion, Starfish Software, Symbian, Ltd. (2001). * All Rights Reserved. * Implementation of all or part of any Specification may require  * licenses under third party intellectual property rights,  * including without limitation, patent rights (such a third party  * may or may not be a Supporter). The Sponsors of the Specification  * are not responsible and shall not be held responsible in any  * manner for identifying or failing to identify any or all such  * third party intellectual property rights. *  * THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN ARE PROVIDED  * ON AN "AS IS" BASIS WITHOUT WARRANTY OF ANY KIND AND ERICSSON, IBM,  * LOTUS, MATSUSHITA COMMUNICATION INDUSTRIAL CO. LTD, MOTOROLA,  * NOKIA, PALM INC., PSION, STARFISH SOFTWARE AND ALL OTHER SYNCML  * SPONSORS DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING  * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION  * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT  * SHALL ERICSSON, IBM, LOTUS, MATSUSHITA COMMUNICATION INDUSTRIAL CO.,  * LTD, MOTOROLA, NOKIA, PALM INC., PSION, STARFISH SOFTWARE OR ANY  * OTHER SYNCML SPONSOR BE LIABLE TO ANY PARTY FOR ANY LOSS OF  * PROFITS, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF  * BUSINESS, OR FOR DIRECT, INDIRECT, SPECIAL OR EXEMPLARY, INCIDENTAL,  * PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND IN CONNECTION WITH  * THIS DOCUMENT OR THE INFORMATION CONTAINED HEREIN, EVEN IF ADVISED  * OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE. *  * The above notice and this paragraph must be included on all copies  * of this document that are made. *  */#ifndef FALSE#define FALSE  0#endif#ifndef TRUE#define TRUE   1#endif/*** Version*/#define OBEX_VERSION		            0x12           /* Version 1.2 *///Mickey 2003.1.29/*** Target*/#define SYNCML_TARGET "SYNCML-SYNC"		/* UUID for SyncML. This is used to identify SyncML service on OBEX. *//*** Standard Obex headers**** Reserved and user defined headers**   0x10 to 0x2F RESERVED this range includes all combinations of the upper 2 bits**   0x30 to 0x3F USER DEFINED this range includes all combinations of the upper 2 bits*/#define OBEX_HEADER_COUNT	        0xC0 /* Number of objects (used by connect)  */#define OBEX_HEADER_NAME	        0x01 /* Name of the object                   */#define OBEX_HEADER_TYPE	        0x42 /* Type of the object                   */#define OBEX_HEADER_TIME	        0x44 /* Last modification of object          */#define OBEX_HEADER_TIME2	        0xC4 /* This value is also allowed for time  */#define OBEX_HEADER_LENGTH	        0xC3 /* Total length of object               */#define OBEX_HEADER_DESCRIPTION	    0x05 /* Description of object                */#define OBEX_HEADER_TARGET	        0x46 /* Identifies the target for the object */#define OBEX_HEADER_HTTP            0x47 /* An HTTP Header.                      */#define OBEX_HEADER_BODY	        0x48 /* Data part of the object (body)       */#define OBEX_HEADER_BODY_END	    0x49 /* Last data part of the obj (body end) */#define OBEX_HEADER_WHO		        0x4A /* Identifies the sender of the object  */#define OBEX_HEADER_CONNECTION	    0xCB /* Connection identifier                */#define OBEX_HEADER_APP_PARM        0x4C /* extended application req & resp info */#define OBEX_HEADER_AUTH_CHALLENGE  0x4D /* Challenge auth digest-challenge      */#define OBEX_HEADER_AUTH_RESPONSE   0x4E /* Authentication digest-response       */#define OBEX_HEADER_OBJECT          0x4F /* OBEX Object class of object          */#define OBEX_HEADER_CREATORID       0xCF /* Creator id                           */#define OBEX_HEADER_XSYNCMLHMAC     0x30 /* HMAC string for field x-syncml-hmac  *//*** Obex Header encoding schemes*/#define OBEX_HEADER_ENCODING_MASK        0xc0#define OBEX_HEADER_ENCODING_UNICODE     0x00#define OBEX_HEADER_ENCODING_BYTE_SEQ    0x40#define OBEX_HEADER_ENCODING_BYTE        0x80#define OBEX_HEADER_ENCODING_INT         0xc0/*** Obex Commands**** 0x06 to 0x0F Reserved not to be used w/out extension to this specification** 0x10 to 0x1F User definable use as you please with peer application*/#define OBEX_CMD_CONNECT      0x80    /* Establish a connection with Obex peer*/#define OBEX_CMD_DISCONNECT   0x81    /* Disconnect a connection.             */#define OBEX_CMD_PUT	         0x02    /* Send a document to peer.             */#define OBEX_CMD_GET		      0x03    /* Request a document from peer.        */#define OBEX_CMD_COMMAND	   0x04    /* *RESERVED*                           */#define OBEX_CMD_SETPATH	   0x85    /* Alter current directory of receiver. */#define OBEX_CMD_ABORT		   0xFF    /* Abort current task.                  */#define OBEX_CMD_FINAL		   0x80    /* Final packet Mask                    *//*** Command specific flags bit settings*/#define OBEX_SETPATH_BACKUP_LEVEL 0x80 /* backup level before applying (eq. to ../ on many systems) */#define OBEX_SETPATH_NO_CREATE    0x40 /* Don抰 create dir if it doesn't exist, ret error instead.  *//*** Obex Responses**** The response code contains the HTTP status code (a 3 digit ASCII encoded positive integer)** encoded in the low order 7 bits as an unsigned integer (the code in parentheses has the** Final bit set). See the HTTP document for complete descriptions of each of these codes.** The most commonly used response codes are 0x90 (0x10 Continue with Final bit set, used** in responding to non-final request packets), and 0xA0 (0x20 Success w/Final bit set,** used at end of successful operation).** Note: 0x00 to 0x0F reserved*/#define OBEX_RSP_CONTINUE                 0x10  /*  Continue                                 */#define OBEX_RSP_SWITCH_PRO		         0x11  /*  ????                                     */#define OBEX_RSP_SUCCESS                  0x20  /*  OK, Success                              */#define OBEX_RSP_CREATED                  0x21  /*  Created                                  */#define OBEX_RSP_ACCEPTED                 0x22  /*  Accepted                                 */#define OBEX_RSP_NON_AUTHOR_INFO          0x23  /*  Non-Authoritative Information            */#define OBEX_RSP_NO_CONTENT               0x24  /*  No Content                               */#define OBEX_RSP_RESET_CONTENT            0x25  /*  Reset Content                            */#define OBEX_RSP_PARTIAL_CONTENT          0x26  /*  Partial Content                          */#define OBEX_RSP_MULTIPLE_CHOICES         0x30  /*  Multiple Choices                         */#define OBEX_RSP_MOVED_PERM               0x31  /*  Moved Permanently                        */#define OBEX_RSP_MOVED_TEMP               0x32  /*  Moved temporarily                        */#define OBEX_RSP_SEE_OTHER                0x33  /*  See Other                                */#define OBEX_RSP_NOT_MODIFIED             0x34  /*  Not modified                             */#define OBEX_RSP_USE_PROXY                0x35  /*  Use Proxy                                */#define OBEX_RSP_BAD_REQUEST              0x40  /*  Bad Request - svr couldn抰 understand    */#define OBEX_RSP_UNAUTHORIZED             0x41  /*  Unauthorized                             */#define OBEX_RSP_PAYMENT_REQUIRED         0x42  /*  Payment required                         */#define OBEX_RSP_FORBIDDEN                0x43  /*  Forbidden - understood but refused       */#define OBEX_RSP_NOT_FOUND                0x44  /*  Not Found                                */#define OBEX_RSP_METHOD_NOT_ALLOWED       0x45  /*  Method not allowed                       */#define OBEX_RSP_NOT_ACCEPTABLE           0x46  /*  Not Acceptable                           */#define OBEX_RSP_PROXY_AUTH_REQ           0x47  /*  Proxy Authentication required            */#define OBEX_RSP_REQUEST_TIME_OUT         0x48  /*  Request Time Out                         */#define OBEX_RSP_CONFLICT                 0x49  /*  Conflict                                 */#define OBEX_RSP_GONE                     0x4A  /*  Gone                                     */#define OBEX_RSP_LENGTH_REQUIRED          0x4B  /*  Length Required                          */#define OBEX_RSP_PRECONDITON_FAILED       0x4C  /*  Precondition failed                      */#define OBEX_RSP_REQ_ENTITY_TOO_LARGE     0x4D  /*  Requested entity too large               */#define OBEX_RSP_REQUEST_URL_TOO_LARGE    0x4E  /*  Request URL too large                    */#define OBEX_RSP_UNSUPPORTED_MEDIA_TYP    0x4F  /*  Unsupported media type                   */#define OBEX_RSP_INTERNAL_SERVER_ERROR    0x50  /*  Internal Server Error                    */#define OBEX_RSP_NOT_IMPLEMENTED          0x51  /*  Not Implemented                          */#define OBEX_RSP_BAD_GATEWAY              0x52  /*  Bad Gateway                              */#define OBEX_RSP_SERVICE_UNAVAIL          0x53  /*  Service Unavailable                      */#define OBEX_RSP_GATEWAY_TIMEOUT          0x54  /*  Gateway Timeout                          */#define OBEX_RSP_HTTP_VERSION_UNSUPPORT   0x55  /*  HTTP version not supported               */#define OBEX_RSP_DATABASE_FULL            0x60  /*  Database Full                            */#define OBEX_RSP_DATABASE_LOCKED          0x61  /*  Database Locked                          *//*** Predefined transports*/#define DEFINED_TRANSPORT_IRDA            1         /* Obex over IrDA    */#define DEFINED_TRANSPORT_INET            2         /* Obex over Inet    */#define DEFINED_TRANSPORT_BLUETOOTH       3         /* Someday           *//*** Define some common defaults for our provided transport services.*/#define OBEX_PORT                         650#define OBEX_DEFAULT_SERVICE              "OBEX"/*** MTU max and min*/#define OBEX_DEFAULT_PACKET_LENGTH        1024#define OBEX_MINIMUM_PACKET_LENGTH        255

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -