program.searchresults

一个用于驱动TFT屏的驱动程序,使用IC:1828,program (无EEPROM 无IR,完整说明)IIC只写一个

---- write1828 Matches (68 in 5 files) ----
IIC_RW.c:void write1828(char address,unsigned char count,char *buf_data);
IIC_RW.c:// 函数:void write1828(char address,unsigned char count,char *buf_data)
IIC_RW.c:void write1828(char address,char buf_data)
IIC_RW.h:extern void write1828(char address,char buf_data);
Inital.c:		write1828(array[i],0x01,&tmp);  					// 偶数位是寄存器地址
Osd.c:	//write1828(cw1,0x01,&tmp);
Osd.c:	//write1828(cw2,0x01,&pos);
Osd.c:	//	write1828(cw3,0x01,&fontcode[i]);
Osd.c:	write1828(osd2,0x01,&temp);
Osd.c:			//write1828(osd9,0x02,&temp);
Osd.c:			write1828(osd9,0x01,&posx);
Osd.c:			write1828(osd10,0x01,&posy);
Osd.c:			//write1828(osd16,0x02,&temp);
Osd.c:			write1828(osd16,0x01,&posx);
Osd.c:			write1828(osd17,0x01,&posy);
Osd.c:			write1828(osd30,0x01,&posx);
Osd.c:			write1828(osd31,0x01,&posy);
Osd.c:			write1828(osd4,0x01,&sizex);
Osd.c:			write1828(osd13,0x01,&sizex);
Osd.c:			write1828(osd14,0x01,&sizey);
Osd.c:			write1828(osd28,0x01,&sizex);
Osd.c:  write1828(osd2,0x01,&temp5);
Osd.c:	write1828(cw1,0x01,&tmp);
Osd.c:	write1828(cw2,0x01,&tmp);
Osd.c:		write1828(cw3,0x01,&tmp);
Osd.c:	//write1828(cw3,0x10,&temp[2]);
Osd.c:			write1828(osd15,0x01,&pos);
Osd.c:			write1828(osd29,0x01,&pos);
Osd.c:	write1828(addr,0x01,&temp);
Osd.c:	write1828(addr,0x01,&temp);
Osd.c:	write1828(addr,0x01,&temp);
Osd.c:	write1828(addr,0x01,&temp);
Osd.c:			write1828(osd5,0x01,&xstart);						// Start
Osd.c:			write1828(osd6,0x01,&xend);   						// End
Osd.c:			write1828(osd20,0x01,&xstart); 						// xStart
Osd.c:			write1828(osd21,0x01,&xend);   						// xEnd
Osd.c:			write1828(osd18,0x01,&ystart);  					// yStart
Osd.c:			write1828(osd19,0x01,&yend);   						// yEnd
Osd.c:			write1828(osd32,0x01,&xstart); 						// Start
Osd.c:			write1828(osd33,0x01,&xend);   						// End
Osd.c:			write1828(osd7,0x01,&xstart);   					// Start
Osd.c:			write1828(osd8,0x01,&xend);							// End
Osd.c:			write1828(osd24,0x01,&xstart);   					// xStart
Osd.c:			write1828(osd25,0x01,&xend);						// xEnd
Osd.c:			write1828(osd22,0x01,&ystart);   					// yStart
Osd.c:			write1828(osd23,0x01,&yend);						// yEnd
Osd.c:			write1828(osd34,0x01,&xstart);   					// Start
Osd.c:			write1828(osd35,0x01,&xend);						// End
Osd.c:	write1828(osd3,0x01,&blink);
Osd.c:	write1828(osd2,0x01,&temp);
Osd.c:			write1828(0x1E,0x01,&value);	
Osd.c:			write1828(0x1F,0x01,&value);
Osd.c:			write1828(0x20,0x01,&value);
Osd.c:			write1828(0x21,0x01,&value);
Osd.c:			write1828(0x2F,0x01,&value);
Osd.c:			write1828(0x30,0x01,&value);
Osd.c:			//write1828(0x31,0x01,&value);
Osd.c:			write1828(0x28,0x01,&value);						// 0x28没有定义(2005.9.29)
Osd.c:			write1828(0x29,0x01,&value);						// 0x29没有定义(2005.9.29)
Osd.c:			write1828(0x2a,0x01,&value);
Osd.c:			write1828(0x2b,0x01,&value);
Osd.c:			write1828(0x2c,0x01,&value);
Osd.c:			write1828(0x2d,0x01,&value);
Osd.c:			write1828(0x3C,0x01,&value);
Osd.c:			write1828(0x3D,0x01,&value);
Status.c:	write1828(0x02,0x01,&tmp);									// AISEL
Status.c:	write1828(0x06,0x01,&tmp);
Status.c:	write1828(0x06,0x01,&tmp);