bsp.mk

这是单板上DPRAM的驱动程序

# @(#) pSOSystem PowerPC/V2.2.2*/
#**********************************************************************/
#                                                                     */
#   MODULE:  bsps/fuc8xx/bsp.mk                                       */
#   DATE:    98/7/1                                                   */
#   AUTHOR:  Shan Zhengguang                                          */
#   PURPOSE: Board-specific definitions for "make"                    */
#                                                                     */
#---------------------------------------------------------------------*/
#                                                                     */
#           Copyright 1998 - 1999, ZHONGXING TELECOM CO.,LTD.	        */
#                      ALL RIGHTS RESERVED                            */
#                                                                     */
#---------------------------------------------------------------------*/
#                                                                     */
#    Note: This file will be only used for MAKING BOOT CODE.          */
#                                                                     */
#**********************************************************************/
DTARGET=PPC860
DFP=S
ROM_START=0xFFF00000
ROM_END=0xFFF7FFFF
flash.hex: rom.hex
	@echo "Creating flash.hex file is not necessary !"
	@mkimage -f _CpyDstBeg _CpyDstEnd _CpySrcBeg rom.map rom.hex flash.hex

rom.0: flash.hex
	@echo "Creating binary file is not necessary!"
	@mkimage -r ROM_START ROM_END 0 $(PSS_BSP)/bsp.mk flash.hex rom.0

roms: rom.0

#flash.hex: rom.hex
#	@echo "Creating flash.hex file"
#	@mkimage -f _CpyDstBeg _CpyDstEnd _CpySrcBeg rom.map rom.hex flash.hex
#
#rom.0: flash.hex
#	@echo "Creating binary file"
#	@mkimage -r ROM_START ROM_END 0 $(PSS_BSP)/bsp.mk flash.hex rom.0
#
#roms: rom.0