⭐ 欢迎来到虫虫下载站！ | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站
📤 上传资源

📄 cfb_sp.rpp.talkback.xml

📁 本人编写的FPGA光电编码器输入模块,没有实验,但仿真基本实现,希望有参考价值.
💻 XML
📖 第 1 页 / 共 3 页
字号:
🔍
123 
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[1]</name>
		<pin__>39</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>5</y_coordinate>
		<cell_number>1</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[2]</name>
		<pin__>41</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>4</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[3]</name>
		<pin__>14</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>14</y_coordinate>
		<cell_number>2</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[4]</name>
		<pin__>43</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>3</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[5]</name>
		<pin__>30</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>8</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[6]</name>
		<pin__>37</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>6</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[7]</name>
		<pin__>35</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>7</y_coordinate>
		<cell_number>1</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[8]</name>
		<pin__>31</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>8</y_coordinate>
		<cell_number>1</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
	<row>
		<name>PC_OUT[9]</name>
		<pin__>33</pin__>
		<i_o_bank>1</i_o_bank>
		<x_coordinate>0</x_coordinate>
		<y_coordinate>8</y_coordinate>
		<cell_number>3</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>yes</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load units="pF">0</load>
	</row>
</output_pins>
<i_o_bank_usage>
	<row>
		<i_o_bank>1</i_o_bank>
		<usage>23 / 32 ( 72 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>2</i_o_bank>
		<usage>0 / 35 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>3</i_o_bank>
		<usage>1 / 35 ( 3 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>4</i_o_bank>
		<usage>0 / 36 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
</i_o_bank_usage>
<advanced_data___general>
	<row>
		<name>Status Code</name>
		<value>0</value>
	</row>
	<row>
		<name>Desired User Slack</name>
		<value>0</value>
	</row>
	<row>
		<name>Fit Attempts</name>
		<value>1</value>
	</row>
</advanced_data___general>
<advanced_data___placement_preparation>
	<row>
		<name>Auto Fit Point 1 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Mid Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>993985</value>
	</row>
	<row>
		<name>Internal Atom Count - Fit Attempt 1</name>
		<value>73</value>
	</row>
	<row>
		<name>LE/ALM Count - Fit Attempt 1</name>
		<value>38</value>
	</row>
	<row>
		<name>LAB Count - Fit Attempt 1</name>
		<value>4</value>
	</row>
	<row>
		<name>Outputs per Lab - Fit Attempt 1</name>
		<value>9.000</value>
	</row>
	<row>
		<name>Inputs per LAB - Fit Attempt 1</name>
		<value>5.750</value>
	</row>
	<row>
		<name>Global Inputs per LAB - Fit Attempt 1</name>
		<value>1.000</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global clock + sync load&apos; - Fit Attempt 1</name>
		<value>0:4</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global controls&apos; - Fit Attempt 1</name>
		<value>0:3;1:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global + aclr&apos; - Fit Attempt 1</name>
		<value>0:2;1:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;global non-clock non-aclr&apos; - Fit Attempt 1</name>
		<value>0:4</value>
	</row>
	<row>
		<name>LAB Constraint &apos;global controls&apos; - Fit Attempt 1</name>
		<value>0:1;1:2;2:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;deterministic LABSMUXA/LABXMUXB&apos; - Fit Attempt 1</name>
		<value>0:4</value>
	</row>
	<row>
		<name>LAB Constraint &apos;deterministic LABSMUXC/LABXMUXD&apos; - Fit Attempt 1</name>
		<value>0:3;1:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;clock / ce pair constraint&apos; - Fit Attempt 1</name>
		<value>0:1;1:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;aclr constraint&apos; - Fit Attempt 1</name>
		<value>0:1;1:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;true sload_sclear pair&apos; - Fit Attempt 1</name>
		<value>0:2;1:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;constant sload_sclear pair&apos; - Fit Attempt 1</name>
		<value>0:3;1:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;has placement constraint&apos; - Fit Attempt 1</name>
		<value>0:4</value>
	</row>
	<row>
		<name>LEs in Chains - Fit Attempt 1</name>
		<value>16</value>
	</row>
	<row>
		<name>LEs in Long Chains - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>LABs with Chains - Fit Attempt 1</name>
		<value>1</value>
	</row>
	<row>
		<name>LABs with Multiple Chains - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time in tsm_dat.dll - Fit Attempt 1</name>
		<value>0.020</value>
	</row>
	<row>
		<name>Time in tsm_tan.dll - Fit Attempt 1</name>
		<value>0.040</value>
	</row>
</advanced_data___placement_preparation>
<advanced_data___placement>
	<row>
		<name>Auto Fit Point 2 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Early Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Early Slack - Fit Attempt 1</name>
		<value>995417</value>
	</row>
	<row>
		<name>Auto Fit Point 3 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Mid Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>995417</value>
	</row>
	<row>
		<name>Auto Fit Point 4 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Late Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>995417</value>
	</row>
	<row>
		<name>Auto Fit Point 5 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time in tsm_dat.dll - Fit Attempt 1</name>
		<value>0.060</value>
	</row>
	<row>
		<name>Time in tsm_tan.dll - Fit Attempt 1</name>
		<value>0.061</value>
	</row>
</advanced_data___placement>
<advanced_data___routing>
	<row>
		<name>Early Slack - Fit Attempt 1</name>
		<value>995290</value>
	</row>
	<row>
		<name>Early Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Peak Regional Wire - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>994645</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>994645</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>994645</value>
	</row>
	<row>
		<name>Late Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>1</value>
	</row>
	<row>
		<name>Time in tsm_tan.dll - Fit Attempt 1</name>
		<value>0.120</value>
	</row>
</advanced_data___routing>
</talkback>
123

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -