config.in

为At91rm9200制作的cs8900驱动

      dep_tristate '    Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA
      dep_tristate '    CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
      dep_tristate '    DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI
      dep_tristate '    TOSHIBA TC35815 Ethernet support' CONFIG_TC35815 $CONFIG_PCI
      if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
         dep_bool '      New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL
         bool '      Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO
      fi
      if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
         tristate '    Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
         tristate '    Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
      fi
      dep_tristate '    Davicom DM910x/DM980x support' CONFIG_DM9102 $CONFIG_PCI
      dep_tristate '    EtherExpressPro/100 support' CONFIG_EEPRO100 $CONFIG_PCI
      dep_tristate '    Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 $CONFIG_EISA $CONFIG_EXPERIMENTAL
      dep_tristate '    Myson MTD-8xx PCI Ethernet support' CONFIG_FEALNX $CONFIG_PCI
      dep_tristate '    National Semiconductor DP8381x series PCI Ethernet support' CONFIG_NATSEMI $CONFIG_PCI
      if [ "$CONFIG_NATSEMI" = "y" -o "$CONFIG_NATSEMI" = "m" ]; then
        bool       '      NatSemi workaround for high errors' CONFIG_NATSEMI_CABLE_MAGIC
      fi
      dep_tristate '    PCI NE2000 and clones support (see help)' CONFIG_NE2K_PCI $CONFIG_PCI
      dep_tristate '    Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210 $CONFIG_EISA $CONFIG_EXPERIMENTAL
      dep_tristate '    Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210 $CONFIG_EISA $CONFIG_EXPERIMENTAL
      dep_tristate '    RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)' CONFIG_8139CP $CONFIG_PCI $CONFIG_EXPERIMENTAL
      dep_tristate '    RealTek RTL-8139 PCI Fast Ethernet Adapter support' CONFIG_8139TOO $CONFIG_PCI
      dep_mbool '      Use PIO instead of MMIO' CONFIG_8139TOO_PIO $CONFIG_8139TOO
      dep_mbool '      Support for automatic channel equalization (EXPERIMENTAL)' CONFIG_8139TOO_TUNE_TWISTER $CONFIG_8139TOO $CONFIG_EXPERIMENTAL
      dep_mbool '      Support for older RTL-8129/8130 boards' CONFIG_8139TOO_8129 $CONFIG_8139TOO
      dep_mbool '      Experiment for better RX reset (EXPERIMENTAL)' CONFIG_8139_NEW_RX_RESET $CONFIG_8139TOO $CONFIG_EXPERIMENTAL
      dep_tristate '    SiS 900/7016 PCI Fast Ethernet Adapter support' CONFIG_SIS900 $CONFIG_PCI
      dep_tristate '    SMC EtherPower II' CONFIG_EPIC100 $CONFIG_PCI
      dep_tristate '    Sundance Alta support' CONFIG_SUNDANCE $CONFIG_PCI
      if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
         tristate '    TI ThunderLAN support' CONFIG_TLAN
      fi
      dep_tristate '    VIA Rhine support' CONFIG_VIA_RHINE $CONFIG_PCI
      dep_mbool '      Use MMIO instead of PIO (EXPERIMENTAL)' CONFIG_VIA_RHINE_MMIO $CONFIG_VIA_RHINE $CONFIG_EXPERIMENTAL
      dep_tristate '    Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 $CONFIG_PCI
      if [ "$CONFIG_OBSOLETE" = "y" ]; then
	 dep_bool '    Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET $CONFIG_ISA
      fi
      if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_MIPS" = "y" ]; then
	 bool '    Philips SAA9730 Ethernet support (EXPERIMENTAL)' CONFIG_LAN_SAA9730
      fi
   fi
   bool '  Pocket and portable adapters' CONFIG_NET_POCKET
   if [ "$CONFIG_NET_POCKET" = "y" ]; then
      if [ "$CONFIG_ISA" = "y" -a "$CONFIG_X86" = "y" ]; then
         tristate '    AT-LAN-TEC/RealTek pocket adapter support' CONFIG_ATP
      fi
      dep_tristate '    D-Link DE600 pocket adapter support' CONFIG_DE600 $CONFIG_ISA
      dep_tristate '    D-Link DE620 pocket adapter support' CONFIG_DE620 $CONFIG_ISA
   fi
   if [ "$CONFIG_SGI_IP22" = "y" ]; then
      bool '  SGI Seeq ethernet controller support' CONFIG_SGISEEQ
   fi
   if [ "$CONFIG_DECSTATION" = "y" ]; then
      tristate '  DEC LANCE ethernet controller support' CONFIG_DECLANCE
   fi
   if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
      tristate '  Baget AMD LANCE support' CONFIG_BAGETLANCE
   fi
   if [ "$CONFIG_NEC_OSPREY" = "y" ]; then
      tristate '  Memory-mapped onboard NE2000-compatible ethernet' CONFIG_NE2000
   fi
fi

endmenu

#
#	Gigabit Ethernet
#

mainmenu_option next_comment
comment 'Ethernet (1000 Mbit)'

dep_tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC $CONFIG_PCI
if [ "$CONFIG_ACENIC" != "n" ]; then
   bool '  Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I
fi
dep_tristate 'D-Link DL2000-based Gigabit Ethernet support' CONFIG_DL2K $CONFIG_PCI
dep_tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS $CONFIG_SBUS
dep_tristate 'National Semiconduct DP83820 support' CONFIG_NS83820 $CONFIG_PCI
dep_tristate 'Packet Engines Hamachi GNIC-II support' CONFIG_HAMACHI $CONFIG_PCI
dep_tristate 'Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate 'SysKonnect SK-98xx support' CONFIG_SK98LIN $CONFIG_PCI
dep_tristate 'Broadcom Tigon3 support' CONFIG_TIGON3 $CONFIG_PCI

endmenu

if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
   dep_tristate 'iSeries Virtual Ethernet driver support' CONFIG_VETH $CONFIG_PPC_ISERIES
fi

bool 'FDDI driver support' CONFIG_FDDI
if [ "$CONFIG_FDDI" = "y" ]; then
   if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
      tristate '  Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX
   fi
   dep_tristate '  SysKonnect FDDI PCI support' CONFIG_SKFP $CONFIG_PCI
fi

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   if [ "$CONFIG_INET" = "y" ]; then
      bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI
      if [ "$CONFIG_HIPPI" = "y" -a "$CONFIG_PCI" = "y" ]; then
         dep_tristate '  Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER $CONFIG_PCI
         if [ "$CONFIG_ROADRUNNER" != "n" ]; then
   	    bool '    Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS
         fi
      fi
   fi
fi

dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT

tristate 'PPP (point-to-point protocol) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
   dep_bool '  PPP multilink support (EXPERIMENTAL)' CONFIG_PPP_MULTILINK $CONFIG_EXPERIMENTAL
   dep_bool '  PPP filtering' CONFIG_PPP_FILTER $CONFIG_FILTER
   dep_tristate '  PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
   dep_tristate '  PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
   dep_tristate '  PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
   dep_tristate '  PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      dep_tristate '  PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
   fi
   if [ ! "$CONFIG_ATM" = "n" ]; then
      dep_tristate '  PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP $CONFIG_EXPERIMENTAL
   fi
fi

tristate 'SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
   bool '  CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
   bool '  Keepalive and linefill' CONFIG_SLIP_SMART
   bool '  Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
fi

mainmenu_option next_comment
comment 'Wireless LAN (non-hamradio)'

bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO
if [ "$CONFIG_NET_RADIO" = "y" ]; then
   dep_tristate '  STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET
   tristate '  AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
   tristate '  Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN
   tristate '  Aironet 4500/4800 series adapters' CONFIG_AIRONET4500
   dep_tristate '   Aironet 4500/4800 ISA/PCI/PNP/365 support ' CONFIG_AIRONET4500_NONCS $CONFIG_AIRONET4500
   if [ "$CONFIG_AIRONET4500" != "n" -a "$CONFIG_AIRONET4500_NONCS" != "n" ]; then
      bool '     Aironet 4500/4800 PNP support ' CONFIG_AIRONET4500_PNP
      dep_bool '     Aironet 4500/4800 PCI support ' CONFIG_AIRONET4500_PCI $CONFIG_PCI
      dep_bool '     Aironet 4500/4800 ISA broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_ISA $CONFIG_EXPERIMENTAL
      dep_bool '     Aironet 4500/4800 I365 broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_I365 $CONFIG_EXPERIMENTAL
   fi
   dep_tristate '   Aironet 4500/4800 PROC interface ' CONFIG_AIRONET4500_PROC $CONFIG_AIRONET4500 m

# New directory for Wireless LAN devices - cards above will move there
   source drivers/net/wireless/Config.in
fi

endmenu

source drivers/net/tokenring/Config.in

bool 'Fibre Channel driver support' CONFIG_NET_FC
if [ "$CONFIG_NET_FC" = "y" ]; then
   dep_tristate '  Interphase 5526 Tachyon chipset based adapter support' CONFIG_IPHASE5526 $CONFIG_SCSI $CONFIG_PCI
fi

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   dep_tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI $CONFIG_PCI
   tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER
fi

source drivers/net/wan/Config.in

if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
   source drivers/net/pcmcia/Config.in
fi