config.in

为At91rm9200制作的cs8900驱动

#
# Network device configuration
#

source drivers/net/arcnet/Config.in

tristate 'Dummy net driver support' CONFIG_DUMMY
tristate 'Bonding driver support' CONFIG_BONDING
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
tristate 'Universal TUN/TAP device driver support' CONFIG_TUN
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
fi

if [ "$CONFIG_ISAPNP" = "y" -o "$CONFIG_ISAPNP" = "m" ]; then
   dep_tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000 $CONFIG_ISAPNP
fi

#
#	Ethernet
#

mainmenu_option next_comment
comment 'Ethernet (10 or 100Mbit)'
bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
   if [ "$CONFIG_ARM" = "y" ]; then  
      dep_bool '  ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110

      if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
         source drivers/acorn/net/Config.in
      fi






      if [ "$CONFIG_ARCH_AT91RM9200" = "y" ]; then

tristate '    CERF CS89x0 support' CONFIG_CERF_CS8900A $CONFIG_ISA


         tristate '  AT91RM9200 Ethernet support' CONFIG_AT91_ETHER
         if [ "$CONFIG_AT91_ETHER" = "y" -o "$CONFIG_AT91_ETHER" = "m" ]; then
            bool '      RMII interface?   ' CONFIG_AT91_ETHER_RMII
         fi
      fi
   fi
   if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
	tristate ' Altera Ether00 support' CONFIG_ETHER00
   fi
   if [ "$CONFIG_PPC" = "y" ]; then
      dep_tristate '  MACE (Power Mac ethernet) support' CONFIG_MACE $CONFIG_ALL_PPC
      if [ "$CONFIG_MACE" != "n" ]; then
	 bool '    Use AAUI port instead of TP by default' CONFIG_MACE_AAUI_PORT
      fi
      dep_tristate '  BMAC (G3 ethernet) support' CONFIG_BMAC $CONFIG_ALL_PPC
      dep_tristate '  GMAC (G4/iBook ethernet) support' CONFIG_GMAC $CONFIG_ALL_PPC
      if [ "$CONFIG_4xx" = "y" ]; then
         if [ "$CONFIG_STB03xxx" = "y" -o "$CONFIG_403GCX" = "y" ]; then
	    tristate '  National DP83902AV (Oak ethernet) support' CONFIG_OAKNET
	 fi
      fi
   fi
   if [ "$CONFIG_ZORRO" = "y" ]; then
      tristate '  Ariadne support' CONFIG_ARIADNE
      tristate '  Ariadne II and X-Surf support' CONFIG_NE2K_ZORRO
      tristate '  A2065 support' CONFIG_A2065
      tristate '  Hydra support' CONFIG_HYDRA
   fi
   if [ "$CONFIG_PARISC" = "y" ]; then
      dep_tristate '  Lasi ethernet' CONFIG_LASI_82596 $CONFIG_GSC_LASI
   fi
   if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then
      tristate '  MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC
   fi
   if [ "$CONFIG_MIPS_GT96100" = "y" ]; then
      bool '  MIPS GT96100 Ethernet support' CONFIG_MIPS_GT96100ETH
   fi
   if [ "$CONFIG_MIPS_AU1000" = "y" ]; then
      bool '  MIPS AU1000 Ethernet support' CONFIG_MIPS_AU1000_ENET
   fi
   if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then
      tristate '  SB1250 Ethernet support' CONFIG_NET_SB1250_MAC
   fi
   if [ "$CONFIG_SGI_IP27" = "y" ]; then
      bool '  SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH
   fi
   if [ "$CONFIG_IA64_SGI_SN1" = "y" ]; then
      bool '  SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH
   fi
   if [ "$CONFIG_SUPERH" = "y" ]; then
      tristate '  National DP83902AV  support' CONFIG_STNIC
   fi
   dep_tristate '  Sun LANCE support' CONFIG_SUNLANCE $CONFIG_SBUS
   if [ "$CONFIG_SBUS" = "y" -o "$CONFIG_PCI" = "y" ]; then
      tristate '  Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
   fi
   dep_tristate '  Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC $CONFIG_SBUS $CONFIG_EXPERIMENTAL
   dep_tristate '  Sun QuadEthernet support' CONFIG_SUNQE $CONFIG_SBUS
   dep_tristate '  Sun GEM support' CONFIG_SUNGEM $CONFIG_PCI
   bool '  3COM cards' CONFIG_NET_VENDOR_3COM
   if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
      dep_tristate '    3c501 "EtherLink" support' CONFIG_EL1 $CONFIG_ISA
      dep_tristate '    3c503 "EtherLink II" support' CONFIG_EL2 $CONFIG_ISA
      dep_tristate '    3c505 "EtherLink Plus" support' CONFIG_ELPLUS $CONFIG_ISA
      dep_tristate '    3c507 "EtherLink 16" support (EXPERIMENTAL)' CONFIG_EL16 $CONFIG_ISA $CONFIG_EXPERIMENTAL
      if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_MCA" = "y" ]; then
         tristate '    3c509/3c529 (MCA)/3c579 "EtherLink III" support' CONFIG_EL3
      fi
      if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" ]; then
         tristate '    3c515 ISA "Fast EtherLink"' CONFIG_3C515
      fi
      dep_tristate '    3c523 "EtherLink/MC" support' CONFIG_ELMC $CONFIG_MCA
      dep_tristate '    3c527 "EtherLink/MC 32" support (EXPERIMENTAL)' CONFIG_ELMC_II $CONFIG_MCA $CONFIG_EXPERIMENTAL
      if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
         tristate '    3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
      fi
   fi
   dep_tristate '  AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE $CONFIG_ISA
   bool '  Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
   if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
      dep_tristate '    WD80*3 support' CONFIG_WD80x3 $CONFIG_ISA
      dep_tristate '    SMC Ultra MCA support' CONFIG_ULTRAMCA $CONFIG_MCA
      dep_tristate '    SMC Ultra support' CONFIG_ULTRA $CONFIG_ISA
      dep_tristate '    SMC Ultra32 EISA support' CONFIG_ULTRA32 $CONFIG_EISA
      dep_tristate '    SMC 9194 support' CONFIG_SMC9194 $CONFIG_ISA
   fi
   bool '  Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL
   if [ "$CONFIG_NET_VENDOR_RACAL" = "y" ]; then
      dep_tristate '    NI5010 support (EXPERIMENTAL)' CONFIG_NI5010 $CONFIG_ISA $CONFIG_EXPERIMENTAL
      dep_tristate '    NI5210 support' CONFIG_NI52 $CONFIG_ISA
      dep_tristate '    NI6510 support' CONFIG_NI65 $CONFIG_ISA
   fi
   if [ "$CONFIG_ISA" = "y" -o "$CONFIG_MCA" = "y" ]; then
         dep_tristate '  AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 $CONFIG_EXPERIMENTAL
   fi
   if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_MCA" = "y" ]; then
      tristate '  DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
   fi
   if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
      tristate '  HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
   fi
   dep_bool '  Other ISA cards' CONFIG_NET_ISA $CONFIG_ISA
   if [ "$CONFIG_NET_ISA" = "y" ]; then
      tristate '    Cabletron E21xx support' CONFIG_E2100
      tristate '    EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3
      tristate '    EtherExpress 16 support' CONFIG_EEXPRESS
      tristate '    EtherExpressPro support/EtherExpress 10 (i82595) support' CONFIG_EEXPRESS_PRO
      if [ "$CONFIG_OBSOLETE" = "y" ]; then
         tristate '    FMV-181/182/183/184 support' CONFIG_FMV18X
      fi
      tristate '    HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
      tristate '    HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
      tristate '    LP486E on board Ethernet' CONFIG_LP486E
      tristate '    ICL EtherTeam 16i/32 support' CONFIG_ETH16I
      tristate '    NE2000/NE1000 support' CONFIG_NE2000
      if [ "$CONFIG_OBSOLETE" = "y" ]; then
	 dep_tristate '    SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 $CONFIG_EXPERIMENTAL
      fi
      if [ "$CONFIG_OBSOLETE" = "y" ]; then
         tristate '    SK_G16 support' CONFIG_SK_G16
      fi
   fi
   if [ "$CONFIG_MCA" = "y" ]; then
      tristate '  SKnet MCA support' CONFIG_SKMC
      tristate '  NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA
      tristate '  IBM LAN Adapter/A support' CONFIG_IBMLANA
   fi
   if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
     bool '  EISA, VLB, PCI and on board controllers' CONFIG_NET_PCI
   else
     define_bool CONFIG_NET_PCI n
   fi
   if [ "$CONFIG_NET_PCI" = "y" ]; then
      dep_tristate '    AMD PCnet32 PCI support' CONFIG_PCNET32 $CONFIG_PCI
      dep_tristate '    Adaptec Starfire/DuraLAN support' CONFIG_ADAPTEC_STARFIRE $CONFIG_PCI
      if [ "$CONFIG_ISA" = "y" -o "$CONFIG_EISA" = "y" ]; then
	 dep_tristate '    Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 $CONFIG_EXPERIMENTAL
      fi