makefile.in

在LINUX下实现HA的源代码

SOURCES = $(IPv6addr_SOURCES)
OBJECTS = $(IPv6addr_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .lo .o .obj .s
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps heartbeat/resource.d/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

apache: $(top_builddir)/config.status apache.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
AudibleAlarm: $(top_builddir)/config.status AudibleAlarm.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Delay: $(top_builddir)/config.status Delay.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
db2: $(top_builddir)/config.status db2.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Filesystem: $(top_builddir)/config.status Filesystem.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
ICP: $(top_builddir)/config.status ICP.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
IPaddr: $(top_builddir)/config.status IPaddr.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
IPaddr2: $(top_builddir)/config.status IPaddr2.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
IPsrcaddr: $(top_builddir)/config.status IPsrcaddr.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
LinuxSCSI: $(top_builddir)/config.status LinuxSCSI.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
LVM: $(top_builddir)/config.status LVM.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
LVSSyncDaemonSwap: $(top_builddir)/config.status LVSSyncDaemonSwap.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
MailTo: $(top_builddir)/config.status MailTo.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
OCF: $(top_builddir)/config.status OCF.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
portblock: $(top_builddir)/config.status portblock.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Raid1: $(top_builddir)/config.status Raid1.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
ServeRAID: $(top_builddir)/config.status ServeRAID.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
SendArp: $(top_builddir)/config.status SendArp.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
WAS: $(top_builddir)/config.status WAS.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
WinPopup: $(top_builddir)/config.status WinPopup.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Xinetd: $(top_builddir)/config.status Xinetd.in
	cd $(top_builddir) && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

mostlyclean-hardPROGRAMS:

clean-hardPROGRAMS:
	-test -z "$(hard_PROGRAMS)" || rm -f $(hard_PROGRAMS)

distclean-hardPROGRAMS:

maintainer-clean-hardPROGRAMS:

install-hardPROGRAMS: $(hard_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(harddir)
	@list='$(hard_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(harddir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(harddir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-hardPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(hard_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(harddir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

.c.o:
	$(COMPILE) -c $<

# FIXME: We should only use cygpath when building on Windows,
# and only if it is available.
.c.obj:
	$(COMPILE) -c `cygpath -w $<`

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

IPv6addr$(EXEEXT): $(IPv6addr_OBJECTS) $(IPv6addr_DEPENDENCIES)
	@rm -f IPv6addr$(EXEEXT)
	$(LINK) $(IPv6addr_LDFLAGS) $(IPv6addr_OBJECTS) $(IPv6addr_LDADD) $(LIBS)

install-hardSCRIPTS: $(hard_SCRIPTS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(harddir)
	@list='$(hard_SCRIPTS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(harddir)/`echo $$p|sed '$(transform)'`"; \
	    $(INSTALL_SCRIPT) $$p $(DESTDIR)$(harddir)/`echo $$p|sed '$(transform)'`; \
	  else if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(harddir)/`echo $$p|sed '$(transform)'`"; \
	    $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(harddir)/`echo $$p|sed '$(transform)'`; \
	  else :; fi; fi; \
	done

uninstall-hardSCRIPTS:
	@$(NORMAL_UNINSTALL)
	list='$(hard_SCRIPTS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(harddir)/`echo $$p|sed '$(transform)'`; \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = heartbeat/resource.d

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
info-am:
info: info-am
dvi-am:
dvi: dvi-am
check-am: all-am
check: check-am
installcheck-am:
installcheck: installcheck-am
install-exec-am:
install-exec: install-exec-am

install-data-am: install-hardPROGRAMS install-hardSCRIPTS
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-hardPROGRAMS uninstall-hardSCRIPTS
uninstall: uninstall-am
all-am: Makefile $(PROGRAMS) $(SCRIPTS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(harddir) $(DESTDIR)$(harddir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-hardPROGRAMS mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-hardPROGRAMS clean-compile clean-libtool clean-tags \
		clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-hardPROGRAMS distclean-compile \
		distclean-libtool distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-hardPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: mostlyclean-hardPROGRAMS distclean-hardPROGRAMS \
clean-hardPROGRAMS maintainer-clean-hardPROGRAMS uninstall-hardPROGRAMS \
install-hardPROGRAMS mostlyclean-compile distclean-compile \
clean-compile maintainer-clean-compile mostlyclean-libtool \
distclean-libtool clean-libtool maintainer-clean-libtool \
uninstall-hardSCRIPTS install-hardSCRIPTS tags mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: