demo.plg

ucos_ii在mini2440上的移植KEIL编译环境

VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(13): error:  #127: expected a statement
..\source\usr\Main.c(10): warning:  #177-D: variable "a" was declared but never referenced
Target not created
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(10): warning:  #177-D: variable "a" was declared but never referenced
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
..\source\usr\Main.c(10): warning:  #177-D: variable "a" was declared but never referenced
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(10): warning:  #177-D: variable "a" was declared but never referenced
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
..\source\usr\Main.c(10): warning:  #177-D: variable "a" was declared but never referenced
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
..\source\usr\Main.c(12): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=600 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(13): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(14): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(15): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(15): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(16): error:  #101: "a" has already been declared in the current scope
..\source\usr\Main.c(11): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(12): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(13): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(14): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(15): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(15): warning:  #177-D: variable "a" was declared but never referenced
..\source\usr\Main.c(17): warning:  #177-D: variable "m" was declared but never referenced
..\source\usr\Main.c(18): warning:  #550-D: variable "c" was set but never used
Target not created
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(14): warning:  #177-D: variable "m" was declared but never referenced
..\source\usr\Main.c(15): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=600 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
..\source\usr\Main.c(14): warning:  #177-D: variable "m" was declared but never referenced
..\source\usr\Main.c(15): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=600 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(13): warning:  #550-D: variable "c" was set but never used
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
linking...
Program Size: Code=544 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=536 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).