📄 demo.plg

📁 ucos_ii在mini2440上的移植KEIL编译环境
💻 PLG
📖 第 1 页 / 共 2 页
字号:
12 下一页
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
F:\ARM\ppt\arm教学\nf1111\demo\prj\Demo.uvproj
Project File Date:  04/25/2012

<h2>Output:</h2>
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
*** Error: Referred Memory Range 'ROM1' is undefined.
Target not created
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
linking...
..\out\Demo.axf: Warning: L6665W: Neither Lib$$Request$$armlib Lib$$Request$$cpplib defined, not searching ARM libraries.
..\out\Demo.axf: Error: L6218E: Undefined symbol IRQ_Dispatch (referred from startup.o).
..\out\Demo.axf: Error: L6218E: Undefined symbol Main (referred from startup.o).
Target not created
Build target 'Demo'
assembling startup.s...
linking...
..\out\Demo.axf: Warning: L6665W: Neither Lib$$Request$$armlib Lib$$Request$$cpplib defined, not searching ARM libraries.
..\out\Demo.axf: Error: L6218E: Undefined symbol Main (referred from startup.o).
Target not created
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): warning:  #1-D: last line of file ends without a newline
..\source\usr\Main.c(12): error:  #127: expected a statement
Target not created
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): warning:  #1-D: last line of file ends without a newline
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 1 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
compiling Main.c...
..\source\usr\Main.c(12): error:  #127: expected a statement
Target not created
Build target 'Demo'
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.261V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.261V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=540 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=540 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=540 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF" 
VTarget = 3.267V
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
Info: RTCK is not connected
Info: Auto JTAG speed: 8000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0xC0000078 from 0x00000078, MMU Off, ICache Off, DCache Off
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
DLL version V4.09p, compiled Oct 28 2009 17:33:00
Firmware: J-Link ARM V8 compiled Dec  1 2015 11:42:48
Hardware: V8.00
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x0032409D
ARM9 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: CP15.0.0: 0x41129200: ARM, Architecure 4T
Info: CP15.0.1: 0x0D172172: ICache: 16kB (64*8*32), DCache: 16kB (64*8*32)
Info: Cache type: Separate, Write-back, Format A
JTAG speed: 1000 kHz
Info: J-Link: ARM9 CP15 Settings changed: 0x00000078 from 0xC0000078, MMU Off, ICache Off, DCache Off
Erase Done.
Programming Done.
Verify OK.
Build target 'Demo'
assembling RORWZI_init.s...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Build target 'Demo'
assembling BANK_init.s...
assembling PLL_init.s...
assembling RORWZI_init.s...
assembling STACK_init.s...
assembling startup.s...
compiling Main.c...
linking...
Program Size: Code=532 RO-data=0 RW-data=0 ZI-data=0  
"..\out\Demo.axf" - 0 Error(s), 0 Warning(s).
Load "..\\out\\Demo.AXF"
12 下一页
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -