map.xmsgs

32位单精度浮点加法器

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;31&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;29&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;28&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;27&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;26&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;25&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;34&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;33&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;32&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;31&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;30&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;39&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;38&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;37&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;36&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;35&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;44&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;43&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;42&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;41&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;0&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;40&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;1&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;2&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;3&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;4&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;5&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;6&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;7&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;49&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;8&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;48&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">A&lt;9&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;47&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.