map.xmsgs

32位单精度浮点加法器

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;20&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;0&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;21&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;19&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;1&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;22&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;18&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;0&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;2&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;23&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;17&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;9&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;3&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;24&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;16&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;4&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">Result&lt;30&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;25&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;15&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;26&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;24&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;27&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;23&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;5&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;28&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;22&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;6&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;29&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;21&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;7&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">Result&lt;31&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_rB&lt;20&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">SQ_Temp&lt;8&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>

<msg type="warning" file="PhysDesignRules" num="2452" delta="old" >The IOB <arg fmt="%s" index="1">B&lt;30&gt;</arg> is either not constrained (LOC) to a specific location and/or has an undefined I/O Standard (IOSTANDARD). This condition may seriously affect the device and will be an error in bitstream creation. It should be corrected by properly specifying the pin location and I/O Standard.
</msg>