jwantstatus.pas

delphi NT本地API单元 用delphi写rootkit方便了。

//
// MessageId: STATUS_DEVICE_ALREADY_ATTACHED
//
// MessageText:
//
//  An attempt was made to attach to a device that was already attached to another device.
//

  STATUS_DEVICE_ALREADY_ATTACHED = NTSTATUS($C0000038);
  {$EXTERNALSYM STATUS_DEVICE_ALREADY_ATTACHED}

//
// MessageId: STATUS_OBJECT_PATH_INVALID
//
// MessageText:
//
//  Object Path Component was not a directory object.
//

  STATUS_OBJECT_PATH_INVALID = NTSTATUS($C0000039);
  {$EXTERNALSYM STATUS_OBJECT_PATH_INVALID}

//
// MessageId: STATUS_OBJECT_PATH_NOT_FOUND
//
// MessageText:
//
//  {Path Not Found}
//  The path %hs does not exist.
//

  STATUS_OBJECT_PATH_NOT_FOUND = NTSTATUS($C000003A);
  {$EXTERNALSYM STATUS_OBJECT_PATH_NOT_FOUND}

//
// MessageId: STATUS_OBJECT_PATH_SYNTAX_BAD
//
// MessageText:
//
//  Object Path Component was not a directory object.
//

  STATUS_OBJECT_PATH_SYNTAX_BAD = NTSTATUS($C000003B);
  {$EXTERNALSYM STATUS_OBJECT_PATH_SYNTAX_BAD}

//
// MessageId: STATUS_DATA_OVERRUN
//
// MessageText:
//
//  {Data Overrun}
//  A data overrun error occurred.
//

  STATUS_DATA_OVERRUN = NTSTATUS($C000003C);
  {$EXTERNALSYM STATUS_DATA_OVERRUN}

//
// MessageId: STATUS_DATA_LATE_ERROR
//
// MessageText:
//
//  {Data Late}
//  A data late error occurred.
//

  STATUS_DATA_LATE_ERROR = NTSTATUS($C000003D);
  {$EXTERNALSYM STATUS_DATA_LATE_ERROR}

//
// MessageId: STATUS_DATA_ERROR
//
// MessageText:
//
//  {Data Error}
//  An error in reading or writing data occurred.
//

  STATUS_DATA_ERROR = NTSTATUS($C000003E);
  {$EXTERNALSYM STATUS_DATA_ERROR}

//
// MessageId: STATUS_CRC_ERROR
//
// MessageText:
//
//  {Bad CRC}
//  A cyclic redundancy check (CRC) checksum error occurred.
//

  STATUS_CRC_ERROR = NTSTATUS($C000003F);
  {$EXTERNALSYM STATUS_CRC_ERROR}

//
// MessageId: STATUS_SECTION_TOO_BIG
//
// MessageText:
//
//  {Section Too Large}
//  The specified section is too big to map the file.
//

  STATUS_SECTION_TOO_BIG = NTSTATUS($C0000040);
  {$EXTERNALSYM STATUS_SECTION_TOO_BIG}

//
// MessageId: STATUS_PORT_CONNECTION_REFUSED
//
// MessageText:
//
//  The NtConnectPort request is refused.
//

  STATUS_PORT_CONNECTION_REFUSED = NTSTATUS($C0000041);
  {$EXTERNALSYM STATUS_PORT_CONNECTION_REFUSED}

//
// MessageId: STATUS_INVALID_PORT_HANDLE
//
// MessageText:
//
//  The type of port handle is invalid for the operation requested.
//

  STATUS_INVALID_PORT_HANDLE = NTSTATUS($C0000042);
  {$EXTERNALSYM STATUS_INVALID_PORT_HANDLE}

//
// MessageId: STATUS_SHARING_VIOLATION
//
// MessageText:
//
//  A file cannot be opened because the share access flags are incompatible.
//

  STATUS_SHARING_VIOLATION = NTSTATUS($C0000043);
  {$EXTERNALSYM STATUS_SHARING_VIOLATION}

//
// MessageId: STATUS_QUOTA_EXCEEDED
//
// MessageText:
//
//  Insufficient quota exists to complete the operation
//

  STATUS_QUOTA_EXCEEDED = NTSTATUS($C0000044);
  {$EXTERNALSYM STATUS_QUOTA_EXCEEDED}

//
// MessageId: STATUS_INVALID_PAGE_PROTECTION
//
// MessageText:
//
//  The specified page protection was not valid.
//

  STATUS_INVALID_PAGE_PROTECTION = NTSTATUS($C0000045);
  {$EXTERNALSYM STATUS_INVALID_PAGE_PROTECTION}

//
// MessageId: STATUS_MUTANT_NOT_OWNED
//
// MessageText:
//
//  An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
//

  STATUS_MUTANT_NOT_OWNED = NTSTATUS($C0000046);
  {$EXTERNALSYM STATUS_MUTANT_NOT_OWNED}

//
// MessageId: STATUS_SEMAPHORE_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to release a semaphore such that its maximum count would have been exceeded.
//

  STATUS_SEMAPHORE_LIMIT_EXCEEDED = NTSTATUS($C0000047);
  {$EXTERNALSYM STATUS_SEMAPHORE_LIMIT_EXCEEDED}

//
// MessageId: STATUS_PORT_ALREADY_SET
//
// MessageText:
//
//  An attempt to set a processes DebugPort or ExceptionPort was made, but a port already exists in the process.
//

  STATUS_PORT_ALREADY_SET = NTSTATUS($C0000048);
  {$EXTERNALSYM STATUS_PORT_ALREADY_SET}

//
// MessageId: STATUS_SECTION_NOT_IMAGE
//
// MessageText:
//
//  An attempt was made to query image information on a section which does not map an image.
//

  STATUS_SECTION_NOT_IMAGE = NTSTATUS($C0000049);
  {$EXTERNALSYM STATUS_SECTION_NOT_IMAGE}

//
// MessageId: STATUS_SUSPEND_COUNT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to suspend a thread whose suspend count was at its maximum.
//

  STATUS_SUSPEND_COUNT_EXCEEDED = NTSTATUS($C000004A);
  {$EXTERNALSYM STATUS_SUSPEND_COUNT_EXCEEDED}

//
// MessageId: STATUS_THREAD_IS_TERMINATING
//
// MessageText:
//
//  An attempt was made to suspend a thread that has begun termination.
//

  STATUS_THREAD_IS_TERMINATING = NTSTATUS($C000004B);
  {$EXTERNALSYM STATUS_THREAD_IS_TERMINATING}

//
// MessageId: STATUS_BAD_WORKING_SET_LIMIT
//
// MessageText:
//
//  An attempt was made to set the working set limit to an invalid value (minimum greater than maximum, etc).
//

  STATUS_BAD_WORKING_SET_LIMIT = NTSTATUS($C000004C);
  {$EXTERNALSYM STATUS_BAD_WORKING_SET_LIMIT}

//
// MessageId: STATUS_INCOMPATIBLE_FILE_MAP
//
// MessageText:
//
//  A section was created to map a file which is not compatible to an already existing section which maps the same file.
//

  STATUS_INCOMPATIBLE_FILE_MAP = NTSTATUS($C000004D);
  {$EXTERNALSYM STATUS_INCOMPATIBLE_FILE_MAP}

//
// MessageId: STATUS_SECTION_PROTECTION
//
// MessageText:
//
//  A view to a section specifies a protection which is incompatible with the initial view's protection.
//

  STATUS_SECTION_PROTECTION = NTSTATUS($C000004E);
  {$EXTERNALSYM STATUS_SECTION_PROTECTION}

//
// MessageId: STATUS_EAS_NOT_SUPPORTED
//
// MessageText:
//
//  An operation involving EAs failed because the file system does not support EAs.
//

  STATUS_EAS_NOT_SUPPORTED = NTSTATUS($C000004F);
  {$EXTERNALSYM STATUS_EAS_NOT_SUPPORTED}

//
// MessageId: STATUS_EA_TOO_LARGE
//
// MessageText:
//
//  An EA operation failed because EA set is too large.
//

  STATUS_EA_TOO_LARGE = NTSTATUS($C0000050);
  {$EXTERNALSYM STATUS_EA_TOO_LARGE}

//
// MessageId: STATUS_NONEXISTENT_EA_ENTRY
//
// MessageText:
//
//  An EA operation failed because the name or EA index is invalid.
//

  STATUS_NONEXISTENT_EA_ENTRY = NTSTATUS($C0000051);
  {$EXTERNALSYM STATUS_NONEXISTENT_EA_ENTRY}

//
// MessageId: STATUS_NO_EAS_ON_FILE
//
// MessageText:
//
//  The file for which EAs were requested has no EAs.
//

  STATUS_NO_EAS_ON_FILE = NTSTATUS($C0000052);
  {$EXTERNALSYM STATUS_NO_EAS_ON_FILE}

//
// MessageId: STATUS_EA_CORRUPT_ERROR
//
// MessageText:
//
//  The EA is corrupt and non-readable.
//

  STATUS_EA_CORRUPT_ERROR = NTSTATUS($C0000053);
  {$EXTERNALSYM STATUS_EA_CORRUPT_ERROR}

//
// MessageId: STATUS_FILE_LOCK_CONFLICT
//
// MessageText:
//
//  A requested read/write cannot be granted due to a conflicting file lock.
//

  STATUS_FILE_LOCK_CONFLICT = NTSTATUS($C0000054);
  {$EXTERNALSYM STATUS_FILE_LOCK_CONFLICT}

//
// MessageId: STATUS_LOCK_NOT_GRANTED
//
// MessageText:
//
//  A requested file lock cannot be granted due to other existing locks.
//

  STATUS_LOCK_NOT_GRANTED = NTSTATUS($C0000055);
  {$EXTERNALSYM STATUS_LOCK_NOT_GRANTED}

//
// MessageId: STATUS_DELETE_PENDING
//
// MessageText:
//
//  A non close operation has been requested of a file object with a delete pending.
//

  STATUS_DELETE_PENDING = NTSTATUS($C0000056);
  {$EXTERNALSYM STATUS_DELETE_PENDING}

//
// MessageId: STATUS_CTL_FILE_NOT_SUPPORTED
//
// MessageText:
//
//  An attempt was made to set the control attribute on a file. This attribute is not supported in the target file system.
//

  STATUS_CTL_FILE_NOT_SUPPORTED = NTSTATUS($C0000057);
  {$EXTERNALSYM STATUS_CTL_FILE_NOT_SUPPORTED}

//
// MessageId: STATUS_UNKNOWN_REVISION
//
// MessageText:
//
//  Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of.
//

  STATUS_UNKNOWN_REVISION = NTSTATUS($C0000058);
  {$EXTERNALSYM STATUS_UNKNOWN_REVISION}

//
// MessageId: STATUS_REVISION_MISMATCH
//
// MessageText:
//
//  Indicates two revision levels are incompatible.
//

  STATUS_REVISION_MISMATCH = NTSTATUS($C0000059);
  {$EXTERNALSYM STATUS_REVISION_MISMATCH}

//
// MessageId: STATUS_INVALID_OWNER
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the owner of an object.
//

  STATUS_INVALID_OWNER = NTSTATUS($C000005A);
  {$EXTERNALSYM STATUS_INVALID_OWNER}

//
// MessageId: STATUS_INVALID_PRIMARY_GROUP
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the primary group of an object.
//

  STATUS_INVALID_PRIMARY_GROUP = NTSTATUS($C000005B);
  {$EXTERNALSYM STATUS_INVALID_PRIMARY_GROUP}

//
// MessageId: STATUS_NO_IMPERSONATION_TOKEN
//
// MessageText:
//
//  An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
//

  STATUS_NO_IMPERSONATION_TOKEN = NTSTATUS($C000005C);
  {$EXTERNALSYM STATUS_NO_IMPERSONATION_TOKEN}

//
// MessageId: STATUS_CANT_DISABLE_MANDATORY
//
// MessageText:
//
//  A mandatory group may not be disabled.
//

  STATUS_CANT_DISABLE_MANDATORY = NTSTATUS($C000005D);
  {$EXTERNALSYM STATUS_CANT_DISABLE_MANDATORY}

//
// MessageId: STATUS_NO_LOGON_SERVERS
//
// MessageText:
//
//  There are currently no logon servers available to service the logon request.
//

  STATUS_NO_LOGON_SERVERS = NTSTATUS($C000005E);
  {$EXTERNALSYM STATUS_NO_LOGON_SERVERS}

//
// MessageId: STATUS_NO_SUCH_LOGON_SESSION
//
// MessageText:
//
//  A specified logon session does not exist. It may already have been terminated.
//

  STATUS_NO_SUCH_LOGON_SESSION = NTSTATUS($C000005F);
  {$EXTERNALSYM STATUS_NO_SUCH_LOGON_SESSION}

//
// MessageId: STATUS_NO_SUCH_PRIVILEGE
//
// MessageText:
//
//  A specified privilege does not exist.
//

  STATUS_NO_SUCH_PRIVILEGE = NTSTATUS($C0000060);
  {$EXTERNALSYM STATUS_NO_SUCH_PRIVILEGE}

//
// MessageId: STATUS_PRIVILEGE_NOT_HELD
//
// MessageText:
//
//  A required privilege is not held by the client.
//

  STATUS_PRIVILEGE_NOT_HELD = NTSTATUS($C0000061);
  {$EXTERNALSYM STATUS_PRIVILEGE_NOT_HELD}

//
// MessageId: STATUS_INVALID_ACCOUNT_NAME
//
// MessageText:
//
//  The name provided is not a properly formed account name.
//

  STATUS_INVALID_ACCOUNT_NAME = NTSTATUS($C0000062);
  {$EXTERNALSYM STATUS_INVALID_ACCOUNT_NAME}

//
// MessageId: STATUS_USER_EXISTS
//
// MessageText:
//
//  The specified user already exists.
//

  STATUS_USER_EXISTS = NTSTATUS($C0000063);
  {$EXTERNALSYM STATUS_USER_EXISTS}

//
// MessageId: STATUS_NO_SUCH_USER
//
// MessageText:
//
//  The specified user does not exist.
//

  STATUS_NO_SUCH_USER = NTSTATUS($C0000064); // ntsubauth
  {$EXTERNALSYM STATUS_NO_SUCH_USER}

//
// MessageId: STATUS_GROUP_EXISTS
//
// MessageText:
//
//  The specified group already exists.
//

  STATUS_GROUP_EXISTS = NTSTATUS($C0000065);
  {$EXTERNALSYM STATUS_GROUP_EXISTS}

//
// MessageId: STATUS_NO_SUCH_GROUP
//
// MessageText:
//
//  The specified group does not exist.
//

  STATUS_NO_SUCH_GROUP = NTSTATUS($C0000066);
  {$EXTERNALSYM STATUS_NO_SUCH_GROUP}

//
// MessageId: STATUS_MEMBER_IN_GROUP
//
// MessageText:
//
//  The specified user account is already in the specified group account.
//  Also used to indicate a group cannot be deleted because it contains a member.
//

  STATUS_MEMBER_IN_GROUP = NTSTATUS($C0000067);
  {$EXTERNALSYM STATUS_MEMBER_IN_GROUP}

//
// MessageId: STATUS_MEMBER_NOT_IN_GROUP
//
// MessageText:
//
//  The specified user account is not a member of the specified group account.
//

  STATUS_MEMBER_NOT_IN_GROUP = NTSTATUS($C0000068);
  {$EXTERNALSYM STATUS_MEMBER_NOT_IN_GROUP}

//
// MessageId: STATUS_LAST_ADMIN
//
// MessageText:
//
//  Indicates the requested operation would disable or delete the last remaining administration account.
//  This is not allow