uboot_v2_1_0.mld

改写的U-boot for s3c4510 (注意此源码是在windows下压缩了)。 1、支持串口下载

# (c) Copyright 2004 Xilinx Inc.
#     Author: Xilinx, Inc.
#
#
#     This program is free software; you can redistribute it and/or modify it
#     under the terms of the GNU General Public License as published by the
#     Free Software Foundation; either version 2 of the License, or (at your
#     option) any later version.
#
#
#     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
#     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
#     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
#     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
#     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
#     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
#     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
#     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
#     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
#     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
#     FITNESS FOR A PARTICULAR PURPOSE.
#
#
#     Xilinx hardware products are not intended for use in life support
#     appliances, devices, or systems. Use in such applications is
#     expressly prohibited.
#
#
#     (c) Copyright 2002-2004 Xilinx Inc.
#     All rights reserved.
#
#
#     You should have received a copy of the GNU General Public License along
#     with this program; if not, write to the Free Software Foundation, Inc.,
#     675 Mass Ave, Cambridge, MA 02139, USA.

OPTION psf_version = 2.1;

BEGIN LIBRARY uboot OPTION DRC = uboot_drc;

BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
PROPERTY size = 0;
PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
END ARRAY
    PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string;

# location of persistent storage in the IIC EEPROM (defaults are set for ML300)
PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024;
PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047;
PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0;

END LIBRARY