vectors.s

ecos在三星44b0上的移植

//      mov     r0,sp
//      bl      _show_frame_in

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        // Switch to interrupt stack
        ldr     r2,.irq_level           // current number of nested interrupts
        ldr     r0,[r2]
        add     r1,r0,#1
        str     r1,[r2]                 // if was zero, switch stacks
        cmp     r0,#0
        moveq   r1,sp                   // save old stack pointer
        ldreq   sp,.__interrupt_stack
        stmeqfd sp!,{r1}
10:
#endif

        // The entire CPU state is now stashed on the stack,
        // increment the scheduler lock and handle the interrupt

#ifdef CYGFUN_HAL_COMMON_KERNEL_SUPPORT                 
        .extern cyg_scheduler_sched_lock
        ldr     r3,.cyg_scheduler_sched_lock
        ldr     r4,[r3]
        add     r4,r4,#1
        str     r4,[r3]
#endif

        THUMB_MODE(r3,10)

        mov     r0,v6
        bl      hal_IRQ_handler         // determine interrupt source
        mov     v1,r0                   // returned vector #

#if defined(CYGPKG_KERNEL_INSTRUMENT) && \
    defined(CYGDBG_KERNEL_INSTRUMENT_INTR)
        ldr     r0,=RAISE_INTR          // arg0 = type = INTR,RAISE
        mov     r1,v1                   // arg1 = vector
        mov     r2,#0                   // arg2 = 0
        bl      cyg_instrument          // call instrument function
#endif

        ARM_MODE(r0,10)

        mov     r0,v1                   // vector #

#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT) \
    || defined(CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT)
        // If we are supporting Ctrl-C interrupts from GDB, we must squirrel
        // away a pointer to the save interrupt state here so that we can
        // plant a breakpoint at some later time.

       .extern  hal_saved_interrupt_state
        ldr     r2,=hal_saved_interrupt_state
        str     v6,[r2]
#endif

        cmp     r0,#CYGNUM_HAL_INTERRUPT_NONE   // spurious interrupt
        bne     10f
#ifndef CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS
        mov     r0,v6                   // register frame
        bl      hal_spurious_IRQ
#endif // CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS
        b       spurious_IRQ
        
10:     ldr     r1,.hal_interrupt_data
        ldr     r1,[r1,v1,lsl #2]       // handler data
        ldr     r2,.hal_interrupt_handlers
        ldr     v3,[r2,v1,lsl #2]       // handler (indexed by vector #)
        mov     r2,v6                   // register frame (this is necessary
                                        // for the ISR too, for ^C detection)

#ifdef __thumb__
        ldr     lr,=10f
        bx      v3                      // invoke handler (thumb mode)
        .pool
        .code   16
        .thumb_func
IRQ_10T:
10:     ldr     r2,=15f
        bx      r2                      // switch back to ARM mode
        .pool
        .code   32
15:
IRQ_15A:
#else
        mov     lr,pc                   // invoke handler (call indirect
        mov     pc,v3                   // thru v3)
#endif

spurious_IRQ:           

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        // If we are returning from the last nested interrupt, move back
        // to the thread stack. interrupt_end() must be called on the
        // thread stack since it potentially causes a context switch.
        ldr     r2,.irq_level
        ldr     r3,[r2]
        subs    r1,r3,#1
        str     r1,[r2]
        ldreq   sp,[sp]         // This should be the saved stack pointer
#endif
#ifdef CYGFUN_HAL_COMMON_KERNEL_SUPPORT
        // The return value from the handler (in r0) will indicate whether a 
        // DSR is to be posted. Pass this together with a pointer to the
        // interrupt object we have just used to the interrupt tidy up routine.

                              // don't run this for spurious interrupts!
        cmp     v1,#CYGNUM_HAL_INTERRUPT_NONE
        beq     17f
        ldr     r1,.hal_interrupt_objects
        ldr     r1,[r1,v1,lsl #2]
        mov     r2,v6           // register frame

        THUMB_MODE(r3,10)

        bl      interrupt_end   // post any bottom layer handler
                                // threads and call scheduler
        ARM_MODE(r1,10)
17:
#endif

//      mov     r0,sp
//      bl      show_frame_out

	// return from IRQ is same as return from exception
	b	return_from_exception

#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
// Execute pending DSRs the interrupt stack
// Note: this can only be called from code running on a thread stack
FUNC_START_ARM(hal_interrupt_stack_call_pending_DSRs, r1)
        stmfd   sp!,{r4,r5,lr}
        // Disable interrupts
        mrs     r4,cpsr                 // disable IRQ's
        orr     r2,r4,#CPSR_IRQ_DISABLE|CPSR_FIQ_DISABLE
        bic     r5,r4,#CPSR_IRQ_DISABLE|CPSR_FIQ_DISABLE
        msr     cpsr,r2
        // Switch to interrupt stack
        mov     r3,sp                   // save old stack pointer
        ldr     sp,.__interrupt_stack
        stmfd   sp!,{r3}                // stored at top of interrupt stack
        ldr     r2,.irq_level           // current number of nested interrupts
        ldr     r3,[r2]
        add     r3,r3,#1                // bump nesting level
        str     r3,[r2]
        msr     cpsr,r5                 // enable interrupts

        THUMB_MODE(r1,20)

        bl      cyg_interrupt_call_pending_DSRs


        ARM_MODE(r1,22)

        // Disable interrupts
        mrs     r1,cpsr                 // disable IRQ's
        orr     r2,r1,#CPSR_IRQ_DISABLE|CPSR_FIQ_DISABLE
        msr     cpsr,r2

        // Move back to the thread stack.
        ldr     r2,.irq_level
        ldr     r3,[r2]
        sub     r3,r3,#1                // decrement nesting level
        str     r3,[r2]
        ldr     sp,[sp]                 // This should be the saved stack pointer
        msr     cpsr,r4                 // restore interrupts to original state

#ifdef __thumb__
        ldmfd   sp!,{r4,r5,lr}          // return
        bx      lr
#else
        ldmfd   sp!,{r4,r5,pc}          // return
#endif // __thumb__
#endif // CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        
// Thumb-only support functions
#ifdef __thumb__

FUNC_START_ARM(hal_disable_interrupts, r1)
        mrs     r0,cpsr                 // current state
        orr     r1,r0,#0xC0             // mask both FIQ and IRQ
        msr     cpsr,r1
        bx      lr                      // exit, _old_ in r0        

FUNC_START_ARM(hal_enable_interrupts, r1)
        mrs     r0,cpsr                 // current state
        bic     r1,r0,#0xC0             // mask both FIQ and IRQ
        msr     cpsr,r1
        bx      lr                      // exit
        
FUNC_START_ARM(hal_restore_interrupts, r1)
        mrs     r1,cpsr                 // current state
        bic     r1,r1,#0xC0             // mask out FIQ/IRQ bits
        and     r0,r0,#0xC0             // keep only FIQ/IRQ
        orr     r1,r1,r0                // mask both FIQ and IRQ
        msr     cpsr,r1
        bx      lr                      // exit        

FUNC_START_ARM(hal_query_interrupts, r1)
        mrs     r0,cpsr                 // current state
        bx      lr                      // exit, state in r0

#endif // __thumb__

// Dummy/support functions

        .global __gccmain
        .global _psr
        .global _sp

#ifdef __thumb__
        .code   16
        .thumb_func
__gccmain:
        bx      lr

        .code   16
        .thumb_func
_psr:
        ARM_MODE(r1,10)
        mrs     r0,cpsr
        bx      lr

        .code   16
        .thumb_func
_sp:
        mov     r0,sp
        bx      lr
#else
__gccmain:
        mov     pc,lr   

_psr:
        mrs     r0,cpsr
        mov     pc,lr

_sp:
        mov     r0,sp
        mov     pc,lr
#endif                


//
// Pointers to various objects.
//
#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
PTR(__GDB_stack_base)
PTR(__GDB_stack)
#endif
PTR(__startup_stack)
PTR(__exception_stack)
PTR(__undef_exception_stack)
PTR(__bss_start)
PTR(__bss_end)
PTR(_end)
PTR(__rom_data_start)
PTR(__ram_data_start)
PTR(__ram_data_end)
PTR(hal_interrupt_handlers)
PTR(hal_interrupt_data)
PTR(hal_interrupt_objects)
PTR(__exception_handlers)
PTR(init_flag)
#ifdef CYGFUN_HAL_COMMON_KERNEL_SUPPORT
PTR(cyg_scheduler_sched_lock)
#endif
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
PTR(irq_level)
PTR(__interrupt_stack)
#endif
#ifdef  CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
PTR(__dump_procs)
#endif

//
// Identification - useful to find out when a system was configured
_eCos_id:
        .asciz  "eCos : " __DATE__


// -------------------------------------------------------------------------
// Interrupt vector tables.
// These tables contain the isr, data and object pointers used to deliver
// interrupts to user code.

// Despite appearances, their sizes are not #defines, but .equ symbols
// generated by magic without proper dependencies in arm.inc
// Recompiling will not DTRT without manual intervention.

        .data

init_flag:
        .balign 4
        .long   0

        .extern hal_default_isr

        .globl  hal_interrupt_handlers
hal_interrupt_handlers:
        .rept   CYGNUM_HAL_ISR_COUNT
        .long   hal_default_isr
        .endr

        .globl  hal_interrupt_data
hal_interrupt_data:
        .rept   CYGNUM_HAL_ISR_COUNT
        .long   0
        .endr

        .globl  hal_interrupt_objects
hal_interrupt_objects:
        .rept   CYGNUM_HAL_ISR_COUNT
        .long   0
        .endr

// -------------------------------------------------------------------------
// Temporary interrupt stack
        
        .section ".bss"

// Small stacks, only used for saving information between CPU modes
__exception_stack_base: 
        .rept   32
        .long   0
        .endr
__exception_stack:
        .rept   32
        .long   0
        .endr
__undef_exception_stack:

// Runtime stack used during all interrupt processing
#ifndef CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE
#define CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE 4096
#endif
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        .balign 16
        .global cyg_interrupt_stack_base
cyg_interrupt_stack_base:
__interrupt_stack_base:
        .rept CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE
        .byte 0
        .endr
        .balign 16
        .global cyg_interrupt_stack
cyg_interrupt_stack:
__interrupt_stack:
irq_level:
        .long   0
#endif

#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
        .balign 16
__GDB_stack_base:
        .rept CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE // rather than 1k
        .byte 0
        .endr
__GDB_stack:
#endif
        .balign 16
__startup_stack_base:
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
        .rept 512
#else
        .rept CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE
#endif
        .byte 0
        .endr
        .balign 16
__startup_stack:

#ifdef PLATFORM_EXTRAS
#include PLATFORM_EXTRAS
#endif                                

// --------------------------------------------------------------------------
//  end of vectors.S