multiplex.fit.qmsg

复接程序,用quartus运行的,可以把很多个信号复接在一起,是程序的一部分!

{ "Info" "IFSAC_FSAC_START_LUT_IO_MAC_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, RAM blocks, and DSP blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, LUTs, RAM blocks, and DSP blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_MAC_RAM_PACKING" "" "Info: Finished moving registers into LUTs, I/O cells, DSP blocks, and RAM blocks" {  } {  } 0 0 "Finished moving registers into LUTs, I/O cells, DSP blocks, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "4 unused 3.30 3 1 0 " "Info: Number of I/O pins in group: 4 (unused VREF, 3.30 VCCIO, 3 input, 1 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 0 29 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  29 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 30 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  30 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 0 51 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  51 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 1 51 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 1 total pin(s) used --  51 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use unused 2 27 " "Info: I/O bank number 5 does not use VREF pins and has unused VCCIO pins. 2 total pin(s) used --  27 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use unused 0 29 " "Info: I/O bank number 6 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  29 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use unused 0 52 " "Info: I/O bank number 7 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  52 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use unused 0 51 " "Info: I/O bank number 8 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  51 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "9 does not use unused 0 6 " "Info: I/O bank number 9 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "10 does not use unused 0 0 " "Info: I/O bank number 10 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "11 does not use unused 0 6 " "Info: I/O bank number 11 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "12 does not use unused 0 0 " "Info: I/O bank number 12 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "0.704 ns register register " "Info: Estimated most critical path is register to register delay of 0.704 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns count\[2\] 1 REG LAB_X52_Y1 6 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X52_Y1; Fanout = 6; REG Node = 'count\[2\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "multiplex" "UNKNOWN" "V1" "C:/Documents and Settings/new/桌面/已调试/multiplex/db/multiplex.quartus_db" { Floorplan "C:/Documents and Settings/new/桌面/已调试/multiplex/" "" "" { count[2] } "NODE_NAME" } "" } } { "multiplex.v" "" { Text "C:/Documents and Settings/new/桌面/已调试/multiplex/multiplex.v" 31 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.246 ns) + CELL(0.458 ns) 0.704 ns count\[1\] 2 REG LAB_X52_Y1 5 " "Info: 2: + IC(0.246 ns) + CELL(0.458 ns) = 0.704 ns; Loc. = LAB_X52_Y1; Fanout = 5; REG Node = 'count\[1\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "multiplex" "UNKNOWN" "V1" "C:/Documents and Settings/new/桌面/已调试/multiplex/db/multiplex.quartus_db" { Floorplan "C:/Documents and Settings/new/桌面/已调试/multiplex/" "" "0.704 ns" { count[2] count[1] } "NODE_NAME" } "" } } { "multiplex.v" "" { Text "C:/Documents and Settings/new/桌面/已调试/multiplex/multiplex.v" 31 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.458 ns ( 65.06 % ) " "Info: Total cell delay = 0.458 ns ( 65.06 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.246 ns ( 34.94 % ) " "Info: Total interconnect delay = 0.246 ns ( 34.94 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "multiplex" "UNKNOWN" "V1" "C:/Documents and Settings/new/桌面/已调试/multiplex/db/multiplex.quartus_db" { Floorplan "C:/Documents and Settings/new/桌面/已调试/multiplex/" "" "0.704 ns" { count[2] count[1] } "NODE_NAME" } "" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Tue Aug 22 07:46:53 2006 " "Info: Processing ended: Tue Aug 22 07:46:53 2006" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Info: Elapsed time: 00:00:11" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}