cmdgen.c

远程登陆工具软件源码 用于远程登陆unix

    argv = snewn(argc+1, char *);
    va_start(ap, retval);
    for (i = 0; i <= argc; i++)
	argv[i] = va_arg(ap, char *);
    va_end(ap);

    promptsgot = 0;
    ret = cmdgen_main(argc, argv);

    if (ret != retval) {
	printf("FAILED retval (exp %d got %d):", retval, ret);
	for (i = 0; i < argc; i++)
	    printf(" %s", argv[i]);
	printf("\n");
	fails++;
    } else if (promptsgot != nprompts) {
	printf("FAILED nprompts (exp %d got %d):", nprompts, promptsgot);
	for (i = 0; i < argc; i++)
	    printf(" %s", argv[i]);
	printf("\n");
	fails++;
    } else {
	passes++;
    }
}

void filecmp(char *file1, char *file2, char *fmt, ...)
{
    /*
     * Ideally I should do file comparison myself, to maximise the
     * portability of this test suite once this application begins
     * running on non-Unix platforms. For the moment, though,
     * calling Unix diff is perfectly adequate.
     */
    char *buf;
    int ret;

    buf = dupprintf("diff -q '%s' '%s'", file1, file2);
    ret = system(buf);
    sfree(buf);

    if (ret) {
	va_list ap;

	printf("FAILED diff (ret=%d): ", ret);

	va_start(ap, fmt);
	vprintf(fmt, ap);
	va_end(ap);

	printf("\n");

	fails++;
    } else
	passes++;
}

char *cleanup_fp(char *s)
{
    char *p;

    if (!strncmp(s, "ssh-", 4)) {
	s += strcspn(s, " \n\t");
	s += strspn(s, " \n\t");
    }

    p = s;
    s += strcspn(s, " \n\t");
    s += strspn(s, " \n\t");
    s += strcspn(s, " \n\t");

    return dupprintf("%.*s", s - p, p);
}

char *get_fp(char *filename)
{
    FILE *fp;
    char buf[256], *ret;

    fp = fopen(filename, "r");
    if (!fp)
	return NULL;
    ret = fgets(buf, sizeof(buf), fp);
    fclose(fp);
    if (!ret)
	return NULL;
    return cleanup_fp(buf);
}

void check_fp(char *filename, char *fp, char *fmt, ...)
{
    char *newfp;

    if (!fp)
	return;

    newfp = get_fp(filename);

    if (!strcmp(fp, newfp)) {
	passes++;
    } else {
	va_list ap;

	printf("FAILED check_fp ['%s' != '%s']: ", newfp, fp);

	va_start(ap, fmt);
	vprintf(fmt, ap);
	va_end(ap);

	printf("\n");

	fails++;
    }

    sfree(newfp);
}

int main(int argc, char **argv)
{
    int i;
    static char *const keytypes[] = { "rsa1", "dsa", "rsa" };

    /*
     * Even when this thing is compiled for automatic test mode,
     * it's helpful to be able to invoke it with command-line
     * options for _manual_ tests.
     */
    if (argc > 1)
	return cmdgen_main(argc, argv);

    passes = fails = 0;

    for (i = 0; i < lenof(keytypes); i++) {
	char filename[128], osfilename[128], scfilename[128];
	char pubfilename[128], tmpfilename1[128], tmpfilename2[128];
	char *fp;

	sprintf(filename, "test-%s.ppk", keytypes[i]);
	sprintf(pubfilename, "test-%s.pub", keytypes[i]);
	sprintf(osfilename, "test-%s.os", keytypes[i]);
	sprintf(scfilename, "test-%s.sc", keytypes[i]);
	sprintf(tmpfilename1, "test-%s.tmp1", keytypes[i]);
	sprintf(tmpfilename2, "test-%s.tmp2", keytypes[i]);

	/*
	 * Create an encrypted key.
	 */
	setup_passphrases("sponge", "sponge", NULL);
	test(0, "puttygen", "-t", keytypes[i], "-o", filename, NULL);

	/*
	 * List the public key in OpenSSH format.
	 */
	setup_passphrases(NULL);
	test(0, "puttygen", "-L", filename, "-o", pubfilename, NULL);
	{
	    char cmdbuf[256];
	    fp = NULL;
	    sprintf(cmdbuf, "ssh-keygen -l -f '%s' > '%s'",
		    pubfilename, tmpfilename1);
	    if (system(cmdbuf) ||
		(fp = get_fp(tmpfilename1)) == NULL) {
		printf("UNABLE to test fingerprint matching against OpenSSH");
	    }
	}

	/*
	 * List the public key in IETF/ssh.com format.
	 */
	setup_passphrases(NULL);
	test(0, "puttygen", "-p", filename, NULL);

	/*
	 * List the fingerprint of the key.
	 */
	setup_passphrases(NULL);
	test(0, "puttygen", "-l", filename, "-o", tmpfilename1, NULL);
	if (!fp) {
	    /*
	     * If we can't test fingerprints against OpenSSH, we
	     * can at the very least test equality of all the
	     * fingerprints we generate of this key throughout
	     * testing.
	     */
	    fp = get_fp(tmpfilename1);
	} else {
	    check_fp(tmpfilename1, fp, "%s initial fp", keytypes[i]);
	}

	/*
	 * Change the comment of the key; this _does_ require a
	 * passphrase owing to the tamperproofing.
	 * 
	 * NOTE: In SSH1, this only requires a passphrase because
	 * of inadequacies of the loading and saving mechanisms. In
	 * _principle_, it should be perfectly possible to modify
	 * the comment on an SSH1 key without requiring a
	 * passphrase; the only reason I can't do it is because my
	 * loading and saving mechanisms don't include a method of
	 * loading all the key data without also trying to decrypt
	 * the private section.
	 * 
	 * I don't consider this to be a problem worth solving,
	 * because (a) to fix it would probably end up bloating
	 * PuTTY proper, and (b) SSH1 is on the way out anyway so
	 * it shouldn't be highly significant. If it seriously
	 * bothers anyone then perhaps I _might_ be persuadable.
	 */
	setup_passphrases("sponge", NULL);
	test(0, "puttygen", "-C", "new-comment", filename, NULL);

	/*
	 * Change the passphrase to nothing.
	 */
	setup_passphrases("sponge", "", "", NULL);
	test(0, "puttygen", "-P", filename, NULL);

	/*
	 * Change the comment of the key again; this time we expect no
	 * passphrase to be required.
	 */
	setup_passphrases(NULL);
	test(0, "puttygen", "-C", "new-comment-2", filename, NULL);

	/*
	 * Export the private key into OpenSSH format; no passphrase
	 * should be required since the key is currently unencrypted.
	 * For RSA1 keys, this should give an error.
	 */
	setup_passphrases(NULL);
	test((i==0), "puttygen", "-O", "private-openssh", "-o", osfilename,
	     filename, NULL);

	if (i) {
	    /*
	     * List the fingerprint of the OpenSSH-formatted key.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-l", osfilename, "-o", tmpfilename1, NULL);
	    check_fp(tmpfilename1, fp, "%s openssh clear fp", keytypes[i]);

	    /*
	     * List the public half of the OpenSSH-formatted key in
	     * OpenSSH format.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-L", osfilename, NULL);

	    /*
	     * List the public half of the OpenSSH-formatted key in
	     * IETF/ssh.com format.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-p", osfilename, NULL);
	}

	/*
	 * Export the private key into ssh.com format; no passphrase
	 * should be required since the key is currently unencrypted.
	 * For RSA1 keys, this should give an error.
	 */
	setup_passphrases(NULL);
	test((i==0), "puttygen", "-O", "private-sshcom", "-o", scfilename,
	     filename, NULL);

	if (i) {
	    /*
	     * List the fingerprint of the ssh.com-formatted key.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-l", scfilename, "-o", tmpfilename1, NULL);
	    check_fp(tmpfilename1, fp, "%s ssh.com clear fp", keytypes[i]);

	    /*
	     * List the public half of the ssh.com-formatted key in
	     * OpenSSH format.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-L", scfilename, NULL);

	    /*
	     * List the public half of the ssh.com-formatted key in
	     * IETF/ssh.com format.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-p", scfilename, NULL);
	}

	if (i) {
	    /*
	     * Convert from OpenSSH into ssh.com.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", osfilename, "-o", tmpfilename1,
		 "-O", "private-sshcom", NULL);

	    /*
	     * Convert from ssh.com back into a PuTTY key,
	     * supplying the same comment as we had before we
	     * started to ensure the comparison works.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", tmpfilename1, "-C", "new-comment-2",
		 "-o", tmpfilename2, NULL);

	    /*
	     * See if the PuTTY key thus generated is the same as
	     * the original.
	     */
	    filecmp(filename, tmpfilename2,
		    "p->o->s->p clear %s", keytypes[i]);

	    /*
	     * Convert from ssh.com to OpenSSH.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", scfilename, "-o", tmpfilename1,
		 "-O", "private-openssh", NULL);

	    /*
	     * Convert from OpenSSH back into a PuTTY key,
	     * supplying the same comment as we had before we
	     * started to ensure the comparison works.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", tmpfilename1, "-C", "new-comment-2",
		 "-o", tmpfilename2, NULL);

	    /*
	     * See if the PuTTY key thus generated is the same as
	     * the original.
	     */
	    filecmp(filename, tmpfilename2,
		    "p->s->o->p clear %s", keytypes[i]);

	    /*
	     * Finally, do a round-trip conversion between PuTTY
	     * and ssh.com without involving OpenSSH, to test that
	     * the key comment is preserved in that case.
	     */
	    setup_passphrases(NULL);
	    test(0, "puttygen", "-O", "private-sshcom", "-o", tmpfilename1,
		 filename, NULL);
	    setup_passphrases(NULL);
	    test(0, "puttygen", tmpfilename1, "-o", tmpfilename2, NULL);
	    filecmp(filename, tmpfilename2,
		    "p->s->p clear %s", keytypes[i]);
	}

	/*
	 * Check that mismatched passphrases cause an error.
	 */
	setup_passphrases("sponge2", "sponge3", NULL);
	test(1, "puttygen", "-P", filename, NULL);

	/*
	 * Put a passphrase back on.
	 */
	setup_passphrases("sponge2", "sponge2", NULL);
	test(0, "puttygen", "-P", filename, NULL);

	/*
	 * Export the private key into OpenSSH format, this time
	 * while encrypted. For RSA1 keys, this should give an
	 * error.
	 */
	if (i == 0)
	    setup_passphrases(NULL);   /* error, hence no passphrase read */
	else
	    setup_passphrases("sponge2", NULL);
	test((i==0), "puttygen", "-O", "private-openssh", "-o", osfilename,
	     filename, NULL);

	if (i) {
	    /*
	     * List the fingerprint of the OpenSSH-formatted key.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-l", osfilename, "-o", tmpfilename1, NULL);
	    check_fp(tmpfilename1, fp, "%s openssh encrypted fp", keytypes[i]);

	    /*
	     * List the public half of the OpenSSH-formatted key in
	     * OpenSSH format.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-L", osfilename, NULL);

	    /*
	     * List the public half of the OpenSSH-formatted key in
	     * IETF/ssh.com format.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-p", osfilename, NULL);
	}

	/*
	 * Export the private key into ssh.com format, this time
	 * while encrypted. For RSA1 keys, this should give an
	 * error.
	 */
	if (i == 0)
	    setup_passphrases(NULL);   /* error, hence no passphrase read */
	else
	    setup_passphrases("sponge2", NULL);
	test((i==0), "puttygen", "-O", "private-sshcom", "-o", scfilename,
	     filename, NULL);

	if (i) {
	    /*
	     * List the fingerprint of the ssh.com-formatted key.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-l", scfilename, "-o", tmpfilename1, NULL);
	    check_fp(tmpfilename1, fp, "%s ssh.com encrypted fp", keytypes[i]);

	    /*
	     * List the public half of the ssh.com-formatted key in
	     * OpenSSH format.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-L", scfilename, NULL);

	    /*
	     * List the public half of the ssh.com-formatted key in
	     * IETF/ssh.com format.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-p", scfilename, NULL);
	}

	if (i) {
	    /*
	     * Convert from OpenSSH into ssh.com.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", osfilename, "-o", tmpfilename1,
		 "-O", "private-sshcom", NULL);

	    /*
	     * Convert from ssh.com back into a PuTTY key,
	     * supplying the same comment as we had before we
	     * started to ensure the comparison works.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", tmpfilename1, "-C", "new-comment-2",
		 "-o", tmpfilename2, NULL);

	    /*
	     * See if the PuTTY key thus generated is the same as
	     * the original.
	     */
	    filecmp(filename, tmpfilename2,
		    "p->o->s->p encrypted %s", keytypes[i]);

	    /*
	     * Convert from ssh.com to OpenSSH.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", scfilename, "-o", tmpfilename1,
		 "-O", "private-openssh", NULL);

	    /*
	     * Convert from OpenSSH back into a PuTTY key,
	     * supplying the same comment as we had before we
	     * started to ensure the comparison works.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", tmpfilename1, "-C", "new-comment-2",
		 "-o", tmpfilename2, NULL);

	    /*
	     * See if the PuTTY key thus generated is the same as
	     * the original.
	     */
	    filecmp(filename, tmpfilename2,
		    "p->s->o->p encrypted %s", keytypes[i]);

	    /*
	     * Finally, do a round-trip conversion between PuTTY
	     * and ssh.com without involving OpenSSH, to test that
	     * the key comment is preserved in that case.
	     */
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", "-O", "private-sshcom", "-o", tmpfilename1,
		 filename, NULL);
	    setup_passphrases("sponge2", NULL);
	    test(0, "puttygen", tmpfilename1, "-o", tmpfilename2, NULL);
	    filecmp(filename, tmpfilename2,
		    "p->s->p encrypted %s", keytypes[i]);
	}

	/*
	 * Load with the wrong passphrase.
	 */
	setup_passphrases("sponge8", NULL);
	test(1, "puttygen", "-C", "spurious-new-comment", filename, NULL);

	/*
	 * Load a totally bogus file.
	 */
	setup_passphrases(NULL);
	test(1, "puttygen", "-C", "spurious-new-comment", pubfilename, NULL);
    }
    printf("%d passes, %d fails\n", passes, fails);
    return 0;
}

#endif