📄 mpc8266ads.c
字号:
/* * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Modified during 2001 by * Advanced Communications Technologies (Australia) Pty. Ltd. * Howard Walker, Tuong Vu-Dinh * * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com * Added support for the 16M dram simm on the 8260ads boards * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <ioports.h>#include <i2c.h>#include <mpc8260.h>#include <pci.h>/* * PBI Page Based Interleaving * PSDMR_PBI page based interleaving * 0 bank based interleaving * External Address Multiplexing (EAMUX) adds a clock to address cycles * (this can help with marginal board layouts) * PSDMR_EAMUX adds a clock * 0 no extra clock * Buffer Command (BUFCMD) adds a clock to command cycles. * PSDMR_BUFCMD adds a clock * 0 no extra clock */#define CONFIG_PBI 0#define PESSIMISTIC_SDRAM 0#define EAMUX 0 /* EST requires EAMUX */#define BUFCMD 0/* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ { /* conf ppar psor pdir podr pdat */ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ /* PA6 */ { 1, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ }, /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ }, /* Port C */ { /* conf ppar psor pdir podr pdat */ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT970 FETHMDC */ /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ }, /* Port D */ { /* conf ppar psor pdir podr pdat */ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */ /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ }};typedef struct bscr_ { unsigned long bcsr0; unsigned long bcsr1; unsigned long bcsr2; unsigned long bcsr3; unsigned long bcsr4; unsigned long bcsr5; unsigned long bcsr6; unsigned long bcsr7;} bcsr_t;typedef struct pci_ic_s { unsigned long pci_int_stat; unsigned long pci_int_mask;} pci_ic_t;void reset_phy(void){ volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; /* reset the FEC port */ bcsr->bcsr1 &= ~FETH_RST; bcsr->bcsr1 |= FETH_RST;}int board_early_init_f (void){ volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; volatile pci_ic_t *pci_ic = (pci_ic_t *) CFG_PCI_INT; bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2; /* mask all PCI interrupts */ pci_ic->pci_int_mask |= 0xfff00000; return 0;}int checkboard(void){ puts ("Board: Motorola MPC8266ADS\n"); return 0;}long int initdram(int board_type){ /* Autoinit part stolen from board/sacsng/sacsng.c */ volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar c = 0xff; volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8); uint psdmr = CFG_PSDMR; int i; uint psrt = 0x21; /* for no SPD */ uint chipselects = 1; /* for no SPD */ uint sdram_size = CFG_SDRAM_SIZE * 1024 * 1024; /* for no SPD */ uint or = CFG_OR2_PRELIM; /* for no SPD */ uint data_width; uint rows; uint banks; uint cols; uint caslatency; uint width; uint rowst; uint sdam; uint bsma; uint sda10; u_char spd_size; u_char data; u_char cksum; int j; /* Keep the compiler from complaining about potentially uninitialized vars */ data_width = rows = banks = cols = caslatency = 0; /* * Read the SDRAM SPD EEPROM via I2C. */ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1); spd_size = data; cksum = data; for(j = 1; j < 64; j++)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -