📄 cam5200_flash.c
字号:
/* * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <mpc5xxx.h>#include <asm/processor.h>#ifdef CONFIG_CAM5200#if 0#define DEBUGF(x...) printf(x)#else#define DEBUGF(x...)#endif#define swap16(x) __swab16(x)flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips *//* * CAM5200 is a TQM5200B based board. Additionally it also features * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes * access to flash chip slightly more complicated as additional byte * swapping is necessary within each 16 bit wide flash 'word'. * * This driver's task is to handle both flash devices: 32 bit TQM5200B * flash chip and 16 bit NIOS cpu flash chip. In the below * flash_addr_table table we use least significant address bit to mark * 16 bit flash bank and two sets of routines *_32 and *_16 to handle * specifics of both flashes. */static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { {CFG_BOOTCS_START, CFG_CS5_START | 1}};/*----------------------------------------------------------------------- * Functions */static int write_word(flash_info_t * info, ulong dest, ulong data);#ifdef CFG_FLASH_2ND_16BIT_DEVstatic int write_word_32(flash_info_t * info, ulong dest, ulong data);static int write_word_16(flash_info_t * info, ulong dest, ulong data);static int flash_erase_32(flash_info_t * info, int s_first, int s_last);static int flash_erase_16(flash_info_t * info, int s_first, int s_last);static ulong flash_get_size_32(vu_long * addr, flash_info_t * info);static ulong flash_get_size_16(vu_long * addr, flash_info_t * info);#endifvoid flash_print_info(flash_info_t * info){ int i, k; int size, erased; volatile unsigned long *flash; if (info->flash_id == FLASH_UNKNOWN) { printf("missing or unknown FLASH type\n"); return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_AMD: printf("AMD "); break; case FLASH_MAN_FUJ: printf("FUJITSU "); break; default: printf("Unknown Vendor "); break; } switch (info->flash_id & FLASH_TYPEMASK) { case FLASH_S29GL128N: printf ("S29GL128N (256 Mbit, uniform sector size)\n"); break; case FLASH_AM320B: printf ("29LV320B (32 Mbit, bottom boot sect)\n"); break; case FLASH_AM320T: printf ("29LV320T (32 Mbit, top boot sect)\n"); break; default: printf("Unknown Chip Type\n"); break; } printf(" Size: %ld KB in %d Sectors\n", info->size >> 10, info->sector_count); printf(" Sector Start Addresses:"); for (i = 0; i < info->sector_count; ++i) { /* * Check if whole sector is erased */ if (i != (info->sector_count - 1)) size = info->start[i + 1] - info->start[i]; else size = info->start[0] + info->size - info->start[i]; erased = 1; flash = (volatile unsigned long *)info->start[i]; size = size >> 2; /* divide by 4 for longword access */ for (k = 0; k < size; k++) { if (*flash++ != 0xffffffff) { erased = 0; break; } } if ((i % 5) == 0) printf("\n "); printf(" %08lX%s%s", info->start[i], erased ? " E" : " ", info->protect[i] ? "RO " : " "); } printf("\n"); return;}/* * The following code cannot be run from FLASH! */#ifdef CFG_FLASH_2ND_16BIT_DEVstatic ulong flash_get_size(vu_long * addr, flash_info_t * info){ DEBUGF("get_size: FLASH ADDR %08lx\n", addr); /* bit 0 used for big flash marking */ if ((ulong)addr & 0x1) return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info); else return flash_get_size_32(addr, info);}static ulong flash_get_size_32(vu_long * addr, flash_info_t * info)#elsestatic ulong flash_get_size(vu_long * addr, flash_info_t * info)#endif{ short i; CFG_FLASH_WORD_SIZE value; ulong base = (ulong) addr; volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr); /* Write auto select command: read Manufacturer ID */ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; udelay(1000); value = addr2[0]; DEBUGF("FLASH MANUFACT: %x\n", value); switch (value) { case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: info->flash_id = FLASH_MAN_AMD; break; default: info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; return (0); /* no or unknown flash */ } value = addr2[1]; /* device ID */ DEBUGF("\nFLASH DEVICEID: %x\n", value); switch (value) { case AMD_ID_MIRROR: DEBUGF("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n", addr[14], addr[15]); switch(addr[14]) { case AMD_ID_GL128N_2: if (addr[15] != AMD_ID_GL128N_3) { DEBUGF("Chip: S29GL128N -> unknown\n"); info->flash_id = FLASH_UNKNOWN; } else { DEBUGF("Chip: S29GL128N\n"); info->flash_id += FLASH_S29GL128N; info->sector_count = 128; info->size = 0x02000000; } break; default: info->flash_id = FLASH_UNKNOWN; return(0); } break; default: info->flash_id = FLASH_UNKNOWN; return (0); /* => no or unknown flash */ } /* set up sector start address table */ for (i = 0; i < info->sector_count; i++) info->start[i] = base + (i * 0x00040000); /* check for protected sectors */ for (i = 0; i < info->sector_count; i++) { /* read sector protection at sector address, (A7 .. A0) = 0x02 */ /* D0 = 1 if protected */ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); info->protect[i] = addr2[2] & 1; } /* issue bank reset to return to read mode */ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; return (info->size);}static int wait_for_DQ7_32(flash_info_t * info, int sect){ ulong start, now, last; volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); start = get_timer(0); last = start; while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != (CFG_FLASH_WORD_SIZE) 0x00800080) { if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { printf("Timeout\n"); return -1; } /* show that we're waiting */ if ((now - last) > 1000) { /* every second */ putc('.'); last = now; } } return 0;}#ifdef CFG_FLASH_2ND_16BIT_DEVint flash_erase(flash_info_t * info, int s_first, int s_last){ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { return flash_erase_16(info, s_first, s_last); } else { return flash_erase_32(info, s_first, s_last); }}static int flash_erase_32(flash_info_t * info, int s_first, int s_last)#elseint flash_erase(flash_info_t * info, int s_first, int s_last)#endif{ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); volatile CFG_FLASH_WORD_SIZE *addr2; int flag, prot, sect, l_sect; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) printf("- missing\n"); else printf("- no sectors to erase\n"); return 1; } if (info->flash_id == FLASH_UNKNOWN) { printf("Can't erase unknown flash type - aborted\n"); return 1; } prot = 0; for (sect = s_first; sect <= s_last; ++sect) { if (info->protect[sect]) prot++; } if (prot) printf("- Warning: %d protected sectors will not be erased!", prot); printf("\n"); l_sect = -1; /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ l_sect = sect; /* * Wait for each sector to complete, it's more * reliable. According to AMD Spec, you must * issue all erase commands within a specified * timeout. This has been seen to fail, especially * if printf()s are included (for debug)!! */ wait_for_DQ7_32(info, sect); } } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); /* wait at least 80us - let's wait 1 ms */ udelay(1000); /* reset to read mode */ addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ printf(" done\n"); return 0;}/*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt){ ulong cp, wp, data; int i, l, rc; wp = (addr & ~3); /* get lower word aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { data = 0; for (i = 0, cp = wp; i < l; ++i, ++cp) data = (data << 8) | (*(uchar *) cp); for (; i < 4 && cnt > 0; ++i) { data = (data << 8) | *src++; --cnt; ++cp; } for (; cnt == 0 && i < 4; ++i, ++cp) data = (data << 8) | (*(uchar *) cp); if ((rc = write_word(info, wp, data)) != 0) return (rc); wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { data = 0; for (i = 0; i < 4; ++i) data = (data << 8) | *src++;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -