⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 flash.c

📁 u-boot-1.1.6 源码包
💻 C
字号:
/* * (C) Copyright 2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//* * Yoo. Jonghoon, IPone, yooth@ipone.co.kr * U-Boot port on RPXlite board * * Some of flash control words are modified. (from 2x16bit device * to 4x8bit device) * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices * are not tested. * * (?) Does an RPXLite board which * 	does not use AM29LV800 flash memory exist ? *	I don't know... *//* Yes,Yoo.They do use other FLASH for the board. * * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn * U-Boot port on RPXlite DW version board * * By now,it uses 4 AM29DL323DB90VI devices(4x8bit). * The total FLASH has 16MB(4x4MB). * I just made some necessary changes on the basis of Wolfgang and Yoo's job. * * June 8, 2004 */#include <common.h>#include <mpc8xx.h>flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*//*----------------------------------------------------------------------- * Functions   vu_long : volatile unsigned long IN include/common.h */static ulong flash_get_size (vu_long *addr, flash_info_t *info);static int write_word (flash_info_t *info, ulong dest, ulong data);static void flash_get_offsets (ulong base, flash_info_t *info);unsigned long flash_init (void){	unsigned long size_b0 ;	int i;	/* Init: no FLASHes known */	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {		flash_info[i].flash_id = FLASH_UNKNOWN;	}	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);#if CFG_MONITOR_BASE >= CFG_FLASH_BASE	/* If Monitor is in the cope of FLASH,then	 * protect this area by default in case for	 * other occupation. [SAM] */	/* monitor protection ON by default */	flash_protect(FLAG_PROTECT_SET,		      CFG_MONITOR_BASE,		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,		      &flash_info[0]);#endif	flash_info[0].size = size_b0;	return (size_b0);}static void flash_get_offsets (ulong base, flash_info_t *info){	int i;	/* set up sector start address table */	if (info->flash_id & FLASH_BTYPE) {		info->start[0] = base + 0x00000000;		info->start[1] = base + 0x00008000;		info->start[2] = base + 0x00010000;		info->start[3] = base + 0x00018000;		info->start[4] = base + 0x00020000;		info->start[5] = base + 0x00028000;		info->start[6] = base + 0x00030000;		info->start[7] = base + 0x00038000;		for (i = 8; i < info->sector_count; i++) {			info->start[i] = base + ((i-7) * 0x00040000);		}	} else {		i = info->sector_count - 1;		info->start[i--] = base + info->size - 0x00010000;		info->start[i--] = base + info->size - 0x00018000;		info->start[i--] = base + info->size - 0x00020000;		for (; i >= 0; i--) {			info->start[i] = base + i * 0x00040000;		}	}}void flash_print_info  (flash_info_t *info){	int i;	if (info->flash_id == FLASH_UNKNOWN) {		printf ("missing or unknown FLASH type\n");		return;	}	switch (info->flash_id & FLASH_VENDMASK) {	case FLASH_MAN_AMD:	printf ("AMD ");		break;	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;	default:		printf ("Unknown Vendor ");	break;	}	switch (info->flash_id & FLASH_TYPEMASK) {	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");				break;	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");				break;	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");				break;	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");				break;	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");				break;	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");				break;	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");				break;	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");				break;	case FLASH_AMDL323B:    printf ("AM29DL323B (32 Mbit, bottom boot sector)\n");				break;	/* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM]  */	default:		printf ("Unknown Chip Type\n");				break;	}	printf ("  Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);	printf ("  Sector Start Addresses:");	for (i=0; i<info->sector_count; ++i) {		if ((i % 5) == 0)			printf ("\n   ");		printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : "     ");	}	printf ("\n");	return;}static ulong flash_get_size (vu_long *addr, flash_info_t *info){	short i;	ulong value;	ulong base = (ulong)addr;	/* Write auto select command: read Manufacturer ID */	addr[0xAAA] = 0x00AA00AA ;	addr[0x555] = 0x00550055 ;	addr[0xAAA] = 0x00900090 ;	value = addr[0] ;	switch (value & 0x00FF00FF) {	case AMD_MANUFACT:             		/* AMD_MANUFACT=0x00010001 in flash.h. */		info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h.*/		break;	case FUJ_MANUFACT:		info->flash_id = FLASH_MAN_FUJ;		break;	default:		info->flash_id = FLASH_UNKNOWN;		info->sector_count = 0;		info->size = 0;		return (0);			/* no or unknown flash	*/	}	value = addr[2] ;			/* device ID		*/	switch (value & 0x00FF00FF) {	case (AMD_ID_LV400T & 0x00FF00FF):		info->flash_id += FLASH_AM400T;		info->sector_count = 11;		info->size = 0x00100000;		break;				/* => 1 MB		*/	case (AMD_ID_LV400B & 0x00FF00FF):		info->flash_id += FLASH_AM400B;		info->sector_count = 11;		info->size = 0x00100000;		break;				/* => 1 MB		*/	case (AMD_ID_LV800T & 0x00FF00FF):		info->flash_id += FLASH_AM800T;		info->sector_count = 19;		info->size = 0x00200000;		break;				/* => 2 MB		*/	case (AMD_ID_LV800B & 0x00FF00FF):		info->flash_id += FLASH_AM800B;		info->sector_count = 19;		info->size = 0x00400000;	/* Size doubled by yooth */		break;				/* => 4 MB		 */	case (AMD_ID_LV160T & 0x00FF00FF):		info->flash_id += FLASH_AM160T;		info->sector_count = 35;		info->size = 0x00400000;		break;				/* => 4 MB		*/	case (AMD_ID_LV160B & 0x00FF00FF):		info->flash_id += FLASH_AM160B;		info->sector_count = 35;		info->size = 0x00400000;		break;				/* => 4 MB		*/	case (AMD_ID_DL323B & 0x00FF00FF):		info->flash_id += FLASH_AMDL323B;		info->sector_count = 71;		info->size = 0x01000000;		break;                          /* => 16 MB(4x4MB)  */	/* AMD_ID_DL323B= 0x22532253  FLASH_AMDL323B= 0x0013	 * AMD_ID_DL323B could be found in <flash.h>.[SAM]	 * So we could get : flash_id = 0x00000013.	 * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */	default:		info->flash_id = FLASH_UNKNOWN;		return (0);			/* => no or unknown flash */	}	/* set up sector start address table */	if (info->flash_id & FLASH_BTYPE) {	/* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1,	 * it means bottom boot flash. GOOD IDEA! [SAM]	 */	/* set sector offsets for bottom boot block type        */		info->start[0] = base + 0x00000000;		info->start[1] = base + 0x00008000;		info->start[2] = base + 0x00010000;		info->start[3] = base + 0x00018000;		info->start[4] = base + 0x00020000;		info->start[5] = base + 0x00028000;		info->start[6] = base + 0x00030000;		info->start[7] = base + 0x00038000;		for (i = 8; i < info->sector_count; i++) {			info->start[i] = base + ((i-7) * 0x00040000) ;		}	} else {		/* set sector offsets for top boot block type		*/		i = info->sector_count - 1;		info->start[i--] = base + info->size - 0x00010000;		info->start[i--] = base + info->size - 0x00018000;		info->start[i--] = base + info->size - 0x00020000;		for (; i >= 0; i--) {			info->start[i] = base + i * 0x00040000;		}	}	/* check for protected sectors */	for (i = 0; i < info->sector_count; i++) {		/* read sector protection at sector address, (A7 .. A0) = 0x02 */		/* D0 = 1 if protected */		addr = (volatile unsigned long *)(info->start[i]);		/* info->protect[i] = addr[4] & 1 ; */		/* Mask it for disorder FLASH protection **[Sam]** */	}	/*	 * Prevent writes to uninitialized FLASH.	 */	if (info->flash_id != FLASH_UNKNOWN) {		addr = (volatile unsigned long *)info->start[0];		*addr = 0xF0F0F0F0;	/* reset bank */	}	return (info->size);}int	flash_erase (flash_info_t *info, int s_first, int s_last){	vu_long *addr = (vu_long*)(info->start[0]);	int flag, prot, sect, l_sect;	ulong start, now, last;	if ((s_first < 0) || (s_first > s_last)) {		if (info->flash_id == FLASH_UNKNOWN) {			printf ("- missing\n");		} else {			printf ("- no sectors to erase\n");		}		return 1;	}	if ((info->flash_id == FLASH_UNKNOWN) ||	    (info->flash_id > FLASH_AMD_COMP)) {		printf ("Can't erase unknown flash type %08lx - aborted\n",			info->flash_id);		return 1;	}	prot = 0;	for (sect=s_first; sect<=s_last; ++sect) {		if (info->protect[sect]) {			prot++;		}	}	if (prot) {		printf ("- Warning: %d protected sectors will not be erased!\n",			prot);	} else {		printf ("\n");	}	l_sect = -1;	/* Disable interrupts which might cause a timeout here */	flag = disable_interrupts();	addr[0xAAA] = 0xAAAAAAAA;	addr[0x555] = 0x55555555;	addr[0xAAA] = 0x80808080;	addr[0xAAA] = 0xAAAAAAAA;	addr[0x555] = 0x55555555;	/* Start erase on unprotected sectors */	for (sect = s_first; sect<=s_last; sect++) {		if (info->protect[sect] == 0) {	/* not protected */			addr = (vu_long *)(info->start[sect]) ;			addr[0] = 0x30303030 ;			l_sect = sect;		}	}	/* re-enable interrupts if necessary */	if (flag)		enable_interrupts();	/* wait at least 80us - let's wait 1 ms */	udelay (1000);	/*	 * We wait for the last triggered sector	 */	if (l_sect < 0)		goto DONE;	start = get_timer (0);	last  = start;	addr = (vu_long *)(info->start[l_sect]);	while ((addr[0] & 0x80808080) != 0x80808080) {		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {			printf ("Timeout\n");			return 1;		}		/* show that we're waiting */		if ((now - last) > 1000) {	/* every second */			putc ('.');			last = now;		}	}DONE:	/* reset to read mode */	addr = (vu_long *)info->start[0];	addr[0] = 0xF0F0F0F0;	/* reset bank */	printf (" done\n");	return 0;}/*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt){	ulong cp, wp, data;	int i, l, rc;	wp = (addr & ~3);	/* get lower word aligned address */	/*	 * handle unaligned start bytes	 */	if ((l = addr - wp) != 0) {		data = 0;		for (i=0, cp=wp; i<l; ++i, ++cp) {			data = (data << 8) | (*(uchar *)cp);		}		for (; i<4 && cnt>0; ++i) {			data = (data << 8) | *src++;			--cnt;			++cp;		}		for (; cnt==0 && i<4; ++i, ++cp) {			data = (data << 8) | (*(uchar *)cp);		}		if ((rc = write_word(info, wp, data)) != 0) {			return (rc);		}		wp += 4;	}	/*	 * handle word aligned part	 */	while (cnt >= 4) {		data = 0;		for (i=0; i<4; ++i) {			data = (data << 8) | *src++;		}		if ((rc = write_word(info, wp, data)) != 0) {			return (rc);		}		wp  += 4;		cnt -= 4;	}	if (cnt == 0) {		return (0);	}	/*	 * handle unaligned tail bytes	 */	data = 0;	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {		data = (data << 8) | *src++;		--cnt;	}	for (; i<4; ++i, ++cp) {		data = (data << 8) | (*(uchar *)cp);	}	return (write_word(info, wp, data));}/*----------------------------------------------------------------------- * Write a word to Flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */static int write_word (flash_info_t *info, ulong dest, ulong data){	vu_long *addr = (vu_long *)(info->start[0]);	ulong start;	int flag;	/* Check if Flash is (sufficiently) erased */	if ((*((vu_long *)dest) & data) != data) {		return (2);	}	/* Disable interrupts which might cause a timeout here */	flag = disable_interrupts();	addr[0xAAA] = 0xAAAAAAAA;	addr[0x555] = 0x55555555;	addr[0xAAA] = 0xA0A0A0A0;	*((vu_long *)dest) = data;	/* re-enable interrupts if necessary */	if (flag)		enable_interrupts();	/* data polling for D7 */	start = get_timer (0);	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {			return (1);		}	}	return (0);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -