⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hsdramc.c

📁 u-boot-1.1.6 源码包
💻 C
字号:
/* * Copyright (C) 2005-2006 Atmel Corporation * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#ifdef CFG_HSDRAMC#include <asm/io.h>#include <asm/sdram.h>#include <asm/arch/platform.h>#include "hsdramc1.h"struct hsdramc {	const struct device *hebi;	void *regs;};static struct hsdramc hsdramc;unsigned long sdram_init(const struct sdram_info *info){	unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);	unsigned long sdram_size;	unsigned long tmp;	unsigned long bus_hz;	unsigned int i;	hsdramc.hebi = get_device(DEVICE_HEBI);	if (!hsdramc.hebi)		return 0;	/* FIXME: Both of these lines are complete hacks */	hsdramc.regs = hsdramc.hebi->regs + 0x400;	bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id);	cpu_enable_sdram();	tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)	       | HSDRAMC1_BF(NR, info->row_bits - 11)	       | HSDRAMC1_BF(NB, info->bank_bits - 1)	       | HSDRAMC1_BF(CAS, info->cas)	       | HSDRAMC1_BF(TWR, info->twr)	       | HSDRAMC1_BF(TRC, info->trc)	       | HSDRAMC1_BF(TRP, info->trp)	       | HSDRAMC1_BF(TRCD, info->trcd)	       | HSDRAMC1_BF(TRAS, info->tras)	       | HSDRAMC1_BF(TXSR, info->txsr));#ifdef CFG_SDRAM_16BIT	tmp |= HSDRAMC1_BIT(DBW);	sdram_size = 1 << (info->row_bits + info->col_bits			   + info->bank_bits + 1);#else	sdram_size = 1 << (info->row_bits + info->col_bits			   + info->bank_bits + 2);#endif	hsdramc1_writel(&hsdramc, CR, tmp);	/*	 * Initialization sequence for SDRAM, from the data sheet:	 *	 * 1. A minimum pause of 200 us is provided to precede any	 *    signal toggle.	 */	udelay(200);	/*	 * 2. A Precharge All command is issued to the SDRAM	 */	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE);	hsdramc1_readl(&hsdramc, MR);	writel(0, sdram);	/*	 * 3. Eight auto-refresh (CBR) cycles are provided	 */	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH);	hsdramc1_readl(&hsdramc, MR);	for (i = 0; i < 8; i++)		writel(0, sdram);	/*	 * 4. A mode register set (MRS) cycle is issued to program	 *    SDRAM parameters, in particular CAS latency and burst	 *    length.	 *	 * CAS from info struct, burst length 1, serial burst type	 */	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE);	hsdramc1_readl(&hsdramc, MR);	writel(0, sdram + (info->cas << 4));	/*	 * 5. A Normal Mode command is provided, 3 clocks after tMRD	 *    is met.	 *	 * From the timing diagram, it looks like tMRD is 3	 * cycles...try a dummy read from the peripheral bus.	 */	hsdramc1_readl(&hsdramc, MR);	hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL);	hsdramc1_readl(&hsdramc, MR);	writel(0, sdram);	/*	 * 6. Write refresh rate into SDRAMC refresh timer count	 *    register (refresh rate = timing between refresh cycles).	 *	 * 15.6 us is a typical value for a burst of length one	 */	hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000);	printf("SDRAM: %u MB at address 0x%08lx\n",	       sdram_size >> 20, info->phys_addr);	printf("Testing SDRAM...");	for (i = 0; i < sdram_size / 4; i++)		sdram[i] = i;	for (i = 0; i < sdram_size / 4; i++) {		tmp = sdram[i];		if (tmp != i) {			printf("FAILED at address 0x%08lx\n",			       info->phys_addr + i * 4);			printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);			return 0;		}	}	puts("OK\n");	return sdram_size;}#endif /* CFG_HSDRAMC */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -