⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 interrupts.c

📁 u-boot-1.1.6 源码包
💻 C
字号:
/* * (C) Copyright 2000-2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2004, Psyent Corporation <www.psyent.com> * Scott McNutt <smcnutt@psyent.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <nios2.h>#include <nios2-io.h>#include <asm/io.h>#include <asm/ptrace.h>#include <common.h>#include <command.h>#include <watchdog.h>#ifdef CONFIG_STATUS_LED#include <status_led.h>#endif#if defined(CFG_NIOS_TMRBASE) && !defined(CFG_NIOS_TMRIRQ)#error CFG_NIOS_TMRIRQ not defined (see documentation)#endif/****************************************************************************/struct	irq_action {	interrupt_handler_t *handler;	void *arg;	int count;};static struct irq_action vecs[32];/*************************************************************************/volatile ulong timestamp = 0;void reset_timer (void){	timestamp = 0;}ulong get_timer (ulong base){	WATCHDOG_RESET ();	return (timestamp - base);}void set_timer (ulong t){	timestamp = t;}/* The board must handle this interrupt if a timer is not * provided. */#if defined(CFG_NIOS_TMRBASE)void tmr_isr (void *arg){	nios_timer_t *tmr = (nios_timer_t *)arg;	/* Interrupt is cleared by writing anything to the	 * status register.	 */	writel (&tmr->status, 0);	timestamp += CFG_NIOS_TMRMS;#ifdef CONFIG_STATUS_LED	status_led_tick(timestamp);#endif}static void tmr_init (void){	nios_timer_t *tmr =(nios_timer_t *)CFG_NIOS_TMRBASE;	writel (&tmr->status, 0);	writel (&tmr->control, 0);	writel (&tmr->control, NIOS_TIMER_STOP);#if defined(CFG_NIOS_TMRCNT)	writel (&tmr->periodl, CFG_NIOS_TMRCNT & 0xffff);	writel (&tmr->periodh, (CFG_NIOS_TMRCNT >> 16) & 0xffff);#endif	writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT |			  NIOS_TIMER_START );	irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr);}#endif /* CFG_NIOS_TMRBASE *//*************************************************************************/int disable_interrupts (void){	int val = rdctl (CTL_STATUS);	wrctl (CTL_STATUS, val & ~STATUS_IE);	return (val & STATUS_IE);}void enable_interrupts( void ){	int val = rdctl (CTL_STATUS);	wrctl (CTL_STATUS, val | STATUS_IE);}void external_interrupt (struct pt_regs *regs){	unsigned irqs;	struct irq_action *act;	/* Evaluate only irqs that are both enabled AND pending */	irqs = rdctl (CTL_IENABLE) & rdctl (CTL_IPENDING);	act = vecs;	/* Assume (as does the Nios2 HAL) that bit 0 is highest	 * priority. NOTE: There is ALWAYS a handler assigned	 * (the default if no other).	 */	while (irqs) {		if (irqs & 1) {			act->handler (act->arg);			act->count++;		}		irqs >>=1;		act++;	}}static void def_hdlr (void *arg){	unsigned irqs = rdctl (CTL_IENABLE);	/* Disable the individual interrupt -- with gratuitous	 * warning.	 */	irqs &= ~(1 << (int)arg);	wrctl (CTL_IENABLE, irqs);	printf ("WARNING: Disabling unhandled interrupt: %d\n",			(int)arg);}/*************************************************************************/void irq_install_handler (int irq, interrupt_handler_t *hdlr, void *arg){	int flag;	struct irq_action *act;	unsigned ena = rdctl (CTL_IENABLE);	if ((irq < 0) || (irq > 31))		return;	act = &vecs[irq];	flag = disable_interrupts ();	if (hdlr) {		act->handler = hdlr;		act->arg = arg;		ena |= (1 << irq);		/* enable */	} else {		act->handler = def_hdlr;		act->arg = (void *)irq;		ena &= ~(1 << irq);		/* disable */	}	wrctl (CTL_IENABLE, ena);	if (flag) enable_interrupts ();}int interrupt_init (void){	int i;	/* Assign the default handler to all */	for (i = 0; i < 32; i++) {		vecs[i].handler = def_hdlr;		vecs[i].arg = (void *)i;		vecs[i].count = 0;	}#if defined(CFG_NIOS_TMRBASE)	tmr_init ();#endif	enable_interrupts ();	return (0);}/*************************************************************************/#if (CONFIG_COMMANDS & CFG_CMD_IRQ)int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){	int i;	struct irq_action *act = vecs;	printf ("\nInterrupt-Information:\n\n");	printf ("Nr  Routine   Arg       Count\n");	printf ("-----------------------------\n");	for (i=0; i<32; i++) {		if (act->handler != def_hdlr) {			printf ("%02d  %08lx  %08lx  %d\n",				i,				(ulong)act->handler,				(ulong)act->arg,				act->count);		}		act++;	}	printf ("\n");	return (0);}#endif  /* CONFIG_COMMANDS & CFG_CMD_IRQ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -