⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci_auto.c

📁 u-boot-1.1.6 源码包
💻 C
字号:
/* * arch/ppc/kernel/pci_auto.c * * PCI autoconfiguration library * * Author: Matt Porter <mporter@mvista.com> * * Copyright 2000 MontaVista Software Inc. * * This program is free software; you can redistribute  it and/or modify it * under  the terms of  the GNU General  Public License as published by the * Free Software Foundation;  either version 2 of the  License, or (at your * option) any later version. */#include <common.h>#ifdef CONFIG_PCI#include <pci.h>#undef DEBUG#ifdef DEBUG#define DEBUGF(x...) printf(x)#else#define DEBUGF(x...)#endif /* DEBUG */#define	PCIAUTO_IDE_MODE_MASK		0x05/* * */void pciauto_region_init(struct pci_region* res){	res->bus_lower = res->bus_start;}void pciauto_region_align(struct pci_region *res, unsigned long size){	res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;}int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar){	unsigned long addr;	if (!res) {		DEBUGF("No resource");		goto error;	}	addr = ((res->bus_lower - 1) | (size - 1)) + 1;	if (addr - res->bus_start + size > res->size) {		DEBUGF("No room in resource");		goto error;	}	res->bus_lower = addr + size;	DEBUGF("address=0x%lx", addr);	*bar = addr;	return 0; error:	*bar = 0xffffffff;	return -1;}/* * */void pciauto_setup_device(struct pci_controller *hose,			  pci_dev_t dev, int bars_num,			  struct pci_region *mem,			  struct pci_region *prefetch,			  struct pci_region *io){	unsigned int bar_value, bar_response, bar_size;	unsigned int cmdstat = 0;	struct pci_region *bar_res;	int bar, bar_nr = 0;	int found_mem64 = 0;	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);	cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;	for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {		/* Tickle the BAR and get the response */		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);		pci_hose_read_config_dword(hose, dev, bar, &bar_response);		/* If BAR is not implemented go to the next BAR */		if (!bar_response)			continue;		found_mem64 = 0;		/* Check the BAR type and set our address mask */		if (bar_response & PCI_BASE_ADDRESS_SPACE) {			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))				   & 0xffff) + 1;			bar_res = io;			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);		} else {			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==			     PCI_BASE_ADDRESS_MEM_TYPE_64)				found_mem64 = 1;			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))				bar_res = prefetch;			else				bar_res = mem;			DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);		}		if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {			/* Write it out and update our limit */			pci_hose_write_config_dword(hose, dev, bar, bar_value);			/*			 * If we are a 64-bit decoder then increment to the			 * upper 32 bits of the bar and force it to locate			 * in the lower 4GB of memory.			 */			if (found_mem64) {				bar += 4;				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);			}			cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?				PCI_COMMAND_IO : PCI_COMMAND_MEMORY;		}		DEBUGF("\n");		bar_nr++;	}	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);}static void pciauto_prescan_setup_bridge(struct pci_controller *hose,					 pci_dev_t dev, int sub_bus){	struct pci_region *pci_mem = hose->pci_mem;	struct pci_region *pci_prefetch = hose->pci_prefetch;	struct pci_region *pci_io = hose->pci_io;	unsigned int cmdstat;	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);	/* Configure bus number registers */	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);	if (pci_mem) {		/* Round memory allocator to 1MB boundary */		pciauto_region_align(pci_mem, 0x100000);		/* Set up memory and I/O filter limits, assume 32-bit I/O space */		pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,					(pci_mem->bus_lower & 0xfff00000) >> 16);		cmdstat |= PCI_COMMAND_MEMORY;	}	if (pci_prefetch) {		/* Round memory allocator to 1MB boundary */		pciauto_region_align(pci_prefetch, 0x100000);		/* Set up memory and I/O filter limits, assume 32-bit I/O space */		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,					(pci_prefetch->bus_lower & 0xfff00000) >> 16);		cmdstat |= PCI_COMMAND_MEMORY;	} else {		/* We don't support prefetchable memory for now, so disable */		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);	}	if (pci_io) {		/* Round I/O allocator to 4KB boundary */		pciauto_region_align(pci_io, 0x1000);		pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,					(pci_io->bus_lower & 0x0000f000) >> 8);		pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,					(pci_io->bus_lower & 0xffff0000) >> 16);		cmdstat |= PCI_COMMAND_IO;	}	/* Enable memory and I/O accesses, enable bus master */	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);}static void pciauto_postscan_setup_bridge(struct pci_controller *hose,					  pci_dev_t dev, int sub_bus){	struct pci_region *pci_mem = hose->pci_mem;	struct pci_region *pci_prefetch = hose->pci_prefetch;	struct pci_region *pci_io = hose->pci_io;	/* Configure bus number registers */	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus);	if (pci_mem) {		/* Round memory allocator to 1MB boundary */		pciauto_region_align(pci_mem, 0x100000);		pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,					(pci_mem->bus_lower-1) >> 16);	}	if (pci_prefetch) {		/* Round memory allocator to 1MB boundary */		pciauto_region_align(pci_prefetch, 0x100000);		pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,					(pci_prefetch->bus_lower-1) >> 16);	}	if (pci_io) {		/* Round I/O allocator to 4KB boundary */		pciauto_region_align(pci_io, 0x1000);		pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,					((pci_io->bus_lower-1) & 0x0000f000) >> 8);		pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,					((pci_io->bus_lower-1) & 0xffff0000) >> 16);	}}/* * */void pciauto_config_init(struct pci_controller *hose){	int i;	hose->pci_io = hose->pci_mem = NULL;	for (i=0; i<hose->region_count; i++) {		switch(hose->regions[i].flags) {		case PCI_REGION_IO:			if (!hose->pci_io ||			    hose->pci_io->size < hose->regions[i].size)				hose->pci_io = hose->regions + i;			break;		case PCI_REGION_MEM:			if (!hose->pci_mem ||			    hose->pci_mem->size < hose->regions[i].size)				hose->pci_mem = hose->regions + i;			break;		case (PCI_REGION_MEM | PCI_REGION_PREFETCH):			if (!hose->pci_prefetch ||			    hose->pci_prefetch->size < hose->regions[i].size)				hose->pci_prefetch = hose->regions + i;			break;		}	}	if (hose->pci_mem) {		pciauto_region_init(hose->pci_mem);		DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n",		    hose->pci_mem->bus_start,		    hose->pci_mem->bus_start + hose->pci_mem->size - 1);	}	if (hose->pci_prefetch) {		pciauto_region_init(hose->pci_prefetch);		DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n",		    hose->pci_prefetch->bus_start,		    hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1);	}	if (hose->pci_io) {		pciauto_region_init(hose->pci_io);		DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n",		    hose->pci_io->bus_start,		    hose->pci_io->bus_start + hose->pci_io->size - 1);	}}/* HJF: Changed this to return int. I think this is required * to get the correct result when scanning bridges */int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev){	unsigned int sub_bus = PCI_BUS(dev);	unsigned short class;	unsigned char prg_iface;	int n;	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);	switch(class) {	case PCI_CLASS_BRIDGE_PCI:		hose->current_busno++;		pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io);		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));		/* Passing in current_busno allows for sibling P2P bridges */		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);		/*		 * need to figure out if this is a subordinate bridge on the bus		 * to be able to properly set the pri/sec/sub bridge registers.		 */		n = pci_hose_scan_bus(hose, hose->current_busno);		/* figure out the deepest we've gone for this leg */		sub_bus = max(n, sub_bus);		pciauto_postscan_setup_bridge(hose, dev, sub_bus);		sub_bus = hose->current_busno;		break;	case PCI_CLASS_STORAGE_IDE:		pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);		if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {			DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");			return sub_bus;		}		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);		break;	case PCI_CLASS_BRIDGE_CARDBUS:		/* just do a minimal setup of the bridge, let the OS take care of the rest */		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);		DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));		hose->current_busno++;		break;#ifdef CONFIG_MPC5200	case PCI_CLASS_BRIDGE_OTHER:		DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",		       PCI_DEV(dev));		break;#endif#ifdef CONFIG_MPC834X	case PCI_CLASS_BRIDGE_OTHER:		/*		 * The host/PCI bridge 1 seems broken in 8349 - it presents		 * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_		 * device claiming resources io/mem/irq.. we only allow for		 * the PIMMR window to be allocated (BAR0 - 1MB size)		 */		DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");		pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);		break;#endif	default:		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);		break;	}	return sub_bus;}#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -