⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 vj.h

📁 lwip-1.4.0
💻 H
字号:
/* * Definitions for tcp compression routines. * * $Id: vj.h,v 1.7 2010/02/22 17:52:09 goldsimon Exp $ * * Copyright (c) 1989 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that the above copyright notice and this paragraph are * duplicated in all such forms and that any documentation, * advertising materials, and other materials related to such * distribution and use acknowledge that the software was developed * by the University of California, Berkeley.  The name of the * University may not be used to endorse or promote products derived * from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. * * Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989: * - Initial distribution. */#ifndef VJ_H#define VJ_H#include "lwip/ip.h"#include "lwip/tcp_impl.h"#define MAX_SLOTS 16 /* must be > 2 and < 256 */#define MAX_HDR   128/* * Compressed packet format: * * The first octet contains the packet type (top 3 bits), TCP * 'push' bit, and flags that indicate which of the 4 TCP sequence * numbers have changed (bottom 5 bits).  The next octet is a * conversation number that associates a saved IP/TCP header with * the compressed packet.  The next two octets are the TCP checksum * from the original datagram.  The next 0 to 15 octets are * sequence number changes, one change per bit set in the header * (there may be no changes and there are two special cases where * the receiver implicitly knows what changed -- see below). *  * There are 5 numbers which can change (they are always inserted * in the following order): TCP urgent pointer, window, * acknowlegement, sequence number and IP ID.  (The urgent pointer * is different from the others in that its value is sent, not the * change in value.)  Since typical use of SLIP links is biased * toward small packets (see comments on MTU/MSS below), changes * use a variable length coding with one octet for numbers in the * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the * range 256 - 65535 or 0.  (If the change in sequence number or * ack is more than 65535, an uncompressed packet is sent.) *//* * Packet types (must not conflict with IP protocol version) * * The top nibble of the first octet is the packet type.  There are * three possible types: IP (not proto TCP or tcp with one of the * control flags set); uncompressed TCP (a normal IP/TCP packet but * with the 8-bit protocol field replaced by an 8-bit connection id -- * this type of packet syncs the sender & receiver); and compressed * TCP (described above). * * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and * is logically part of the 4-bit "changes" field that follows.  Top * three bits are actual packet type.  For backward compatibility * and in the interest of conserving bits, numbers are chosen so the * IP protocol version number (4) which normally appears in this nibble * means "IP packet". *//* packet types */#define TYPE_IP               0x40#define TYPE_UNCOMPRESSED_TCP 0x70#define TYPE_COMPRESSED_TCP   0x80#define TYPE_ERROR            0x00/* Bits in first octet of compressed packet */#define NEW_C 0x40 /* flag bits for what changed in a packet */#define NEW_I 0x20#define NEW_S 0x08#define NEW_A 0x04#define NEW_W 0x02#define NEW_U 0x01/* reserved, special-case values of above */#define SPECIAL_I (NEW_S|NEW_W|NEW_U) /* echoed interactive traffic */#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U) /* unidirectional data */#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)#define TCP_PUSH_BIT 0x10/* * "state" data for each active tcp conversation on the wire.  This is * basically a copy of the entire IP/TCP header from the last packet * we saw from the conversation together with a small identifier * the transmit & receive ends of the line use to locate saved header. */struct cstate {  struct cstate *cs_next; /* next most recently used state (xmit only) */  u_short cs_hlen;        /* size of hdr (receive only) */  u_char cs_id;           /* connection # associated with this state */  u_char cs_filler;  union {    char csu_hdr[MAX_HDR];    struct ip_hdr csu_ip;     /* ip/tcp hdr from most recent packet */  } vjcs_u;};#define cs_ip vjcs_u.csu_ip#define cs_hdr vjcs_u.csu_hdrstruct vjstat {  unsigned long vjs_packets;        /* outbound packets */  unsigned long vjs_compressed;     /* outbound compressed packets */  unsigned long vjs_searches;       /* searches for connection state */  unsigned long vjs_misses;         /* times couldn't find conn. state */  unsigned long vjs_uncompressedin; /* inbound uncompressed packets */  unsigned long vjs_compressedin;   /* inbound compressed packets */  unsigned long vjs_errorin;        /* inbound unknown type packets */  unsigned long vjs_tossed;         /* inbound packets tossed because of error */};/* * all the state data for one serial line (we need one of these per line). */struct vjcompress {  struct cstate *last_cs;          /* most recently used tstate */  u_char last_recv;                /* last rcvd conn. id */  u_char last_xmit;                /* last sent conn. id */  u_short flags;  u_char maxSlotIndex;  u_char compressSlot;             /* Flag indicating OK to compress slot ID. */#if LINK_STATS  struct vjstat stats;#endif  struct cstate tstate[MAX_SLOTS]; /* xmit connection states */  struct cstate rstate[MAX_SLOTS]; /* receive connection states */};/* flag values */#define VJF_TOSS 1U /* tossing rcvd frames because of input err */extern void  vj_compress_init    (struct vjcompress *comp);extern u_int vj_compress_tcp     (struct vjcompress *comp, struct pbuf *pb);extern void  vj_uncompress_err   (struct vjcompress *comp);extern int   vj_uncompress_uncomp(struct pbuf *nb, struct vjcompress *comp);extern int   vj_uncompress_tcp   (struct pbuf **nb, struct vjcompress *comp);#endif /* VJ_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -