⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 api.h

📁 lwip-1.4.0
💻 H
字号:
/* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved.  *  * Redistribution and use in source and binary forms, with or without modification,  * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, *    this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, *    this list of conditions and the following disclaimer in the documentation *    and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products *    derived from this software without specific prior written permission.  * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY  * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. *  * Author: Adam Dunkels <adam@sics.se> * */#ifndef __LWIP_API_H__#define __LWIP_API_H__#include "lwip/opt.h"#if LWIP_NETCONN /* don't build if not configured for use in lwipopts.h */#include <stddef.h> /* for size_t */#include "lwip/netbuf.h"#include "lwip/sys.h"#include "lwip/ip_addr.h"#include "lwip/err.h"#ifdef __cplusplusextern "C" {#endif/* Throughout this file, IP addresses and port numbers are expected to be in * the same byte order as in the corresponding pcb. *//* Flags for netconn_write (u8_t) */#define NETCONN_NOFLAG    0x00#define NETCONN_NOCOPY    0x00 /* Only for source code compatibility */#define NETCONN_COPY      0x01#define NETCONN_MORE      0x02#define NETCONN_DONTBLOCK 0x04/* Flags for struct netconn.flags (u8_t) *//** TCP: when data passed to netconn_write doesn't fit into the send buffer,    this temporarily stores whether to wake up the original application task    if data couldn't be sent in the first try. */#define NETCONN_FLAG_WRITE_DELAYED            0x01/** Should this netconn avoid blocking? */#define NETCONN_FLAG_NON_BLOCKING             0x02/** Was the last connect action a non-blocking one? */#define NETCONN_FLAG_IN_NONBLOCKING_CONNECT   0x04/** If this is set, a TCP netconn must call netconn_recved() to update    the TCP receive window (done automatically if not set). */#define NETCONN_FLAG_NO_AUTO_RECVED           0x08/** If a nonblocking write has been rejected before, poll_tcp needs to    check if the netconn is writable again */#define NETCONN_FLAG_CHECK_WRITESPACE         0x10/* Helpers to process several netconn_types by the same code */#define NETCONNTYPE_GROUP(t)    (t&0xF0)#define NETCONNTYPE_DATAGRAM(t) (t&0xE0)/** Protocol family and type of the netconn */enum netconn_type {  NETCONN_INVALID    = 0,  /* NETCONN_TCP Group */  NETCONN_TCP        = 0x10,  /* NETCONN_UDP Group */  NETCONN_UDP        = 0x20,  NETCONN_UDPLITE    = 0x21,  NETCONN_UDPNOCHKSUM= 0x22,  /* NETCONN_RAW Group */  NETCONN_RAW        = 0x40};/** Current state of the netconn. Non-TCP netconns are always * in state NETCONN_NONE! */enum netconn_state {  NETCONN_NONE,  NETCONN_WRITE,  NETCONN_LISTEN,  NETCONN_CONNECT,  NETCONN_CLOSE};/** Use to inform the callback function about changes */enum netconn_evt {  NETCONN_EVT_RCVPLUS,  NETCONN_EVT_RCVMINUS,  NETCONN_EVT_SENDPLUS,  NETCONN_EVT_SENDMINUS,  NETCONN_EVT_ERROR};#if LWIP_IGMP/** Used for netconn_join_leave_group() */enum netconn_igmp {  NETCONN_JOIN,  NETCONN_LEAVE};#endif /* LWIP_IGMP *//* forward-declare some structs to avoid to include their headers */struct ip_pcb;struct tcp_pcb;struct udp_pcb;struct raw_pcb;struct netconn;struct api_msg_msg;/** A callback prototype to inform about events for a netconn */typedef void (* netconn_callback)(struct netconn *, enum netconn_evt, u16_t len);/** A netconn descriptor */struct netconn {  /** type of the netconn (TCP, UDP or RAW) */  enum netconn_type type;  /** current state of the netconn */  enum netconn_state state;  /** the lwIP internal protocol control block */  union {    struct ip_pcb  *ip;    struct tcp_pcb *tcp;    struct udp_pcb *udp;    struct raw_pcb *raw;  } pcb;  /** the last error this netconn had */  err_t last_err;  /** sem that is used to synchroneously execute functions in the core context */  sys_sem_t op_completed;  /** mbox where received packets are stored until they are fetched      by the netconn application thread (can grow quite big) */  sys_mbox_t recvmbox;#if LWIP_TCP  /** mbox where new connections are stored until processed      by the application thread */  sys_mbox_t acceptmbox;#endif /* LWIP_TCP */  /** only used for socket layer */#if LWIP_SOCKET  int socket;#endif /* LWIP_SOCKET */#if LWIP_SO_RCVTIMEO  /** timeout to wait for new data to be received      (or connections to arrive for listening netconns) */  int recv_timeout;#endif /* LWIP_SO_RCVTIMEO */#if LWIP_SO_RCVBUF  /** maximum amount of bytes queued in recvmbox      not used for TCP: adjust TCP_WND instead! */  int recv_bufsize;  /** number of bytes currently in recvmbox to be received,      tested against recv_bufsize to limit bytes on recvmbox      for UDP and RAW, used for FIONREAD */  s16_t recv_avail;#endif /* LWIP_SO_RCVBUF */  /** flags holding more netconn-internal state, see NETCONN_FLAG_* defines */  u8_t flags;#if LWIP_TCP  /** TCP: when data passed to netconn_write doesn't fit into the send buffer,      this temporarily stores how much is already sent. */  size_t write_offset;  /** TCP: when data passed to netconn_write doesn't fit into the send buffer,      this temporarily stores the message.      Also used during connect and close. */  struct api_msg_msg *current_msg;#endif /* LWIP_TCP */  /** A callback function that is informed about events for this netconn */  netconn_callback callback;};/** Register an Network connection event */#define API_EVENT(c,e,l) if (c->callback) {         \                           (*c->callback)(c, e, l); \                         }/** Set conn->last_err to err but don't overwrite fatal errors */#define NETCONN_SET_SAFE_ERR(conn, err) do { \  SYS_ARCH_DECL_PROTECT(lev); \  SYS_ARCH_PROTECT(lev); \  if (!ERR_IS_FATAL((conn)->last_err)) { \    (conn)->last_err = err; \  } \  SYS_ARCH_UNPROTECT(lev); \} while(0);/* Network connection functions: */#define netconn_new(t)                  netconn_new_with_proto_and_callback(t, 0, NULL)#define netconn_new_with_callback(t, c) netconn_new_with_proto_and_callback(t, 0, c)structnetconn *netconn_new_with_proto_and_callback(enum netconn_type t, u8_t proto,                                             netconn_callback callback);err_t   netconn_delete(struct netconn *conn);/** Get the type of a netconn (as enum netconn_type). */#define netconn_type(conn) (conn->type)err_t   netconn_getaddr(struct netconn *conn, ip_addr_t *addr,                        u16_t *port, u8_t local);#define netconn_peer(c,i,p) netconn_getaddr(c,i,p,0)#define netconn_addr(c,i,p) netconn_getaddr(c,i,p,1)err_t   netconn_bind(struct netconn *conn, ip_addr_t *addr, u16_t port);err_t   netconn_connect(struct netconn *conn, ip_addr_t *addr, u16_t port);err_t   netconn_disconnect (struct netconn *conn);err_t   netconn_listen_with_backlog(struct netconn *conn, u8_t backlog);#define netconn_listen(conn) netconn_listen_with_backlog(conn, TCP_DEFAULT_LISTEN_BACKLOG)err_t   netconn_accept(struct netconn *conn, struct netconn **new_conn);err_t   netconn_recv(struct netconn *conn, struct netbuf **new_buf);err_t   netconn_recv_tcp_pbuf(struct netconn *conn, struct pbuf **new_buf);void    netconn_recved(struct netconn *conn, u32_t length);err_t   netconn_sendto(struct netconn *conn, struct netbuf *buf,                       ip_addr_t *addr, u16_t port);err_t   netconn_send(struct netconn *conn, struct netbuf *buf);err_t   netconn_write(struct netconn *conn, const void *dataptr, size_t size,                      u8_t apiflags);err_t   netconn_close(struct netconn *conn);err_t   netconn_shutdown(struct netconn *conn, u8_t shut_rx, u8_t shut_tx);#if LWIP_IGMPerr_t   netconn_join_leave_group(struct netconn *conn, ip_addr_t *multiaddr,                                 ip_addr_t *netif_addr, enum netconn_igmp join_or_leave);#endif /* LWIP_IGMP */#if LWIP_DNSerr_t   netconn_gethostbyname(const char *name, ip_addr_t *addr);#endif /* LWIP_DNS */#define netconn_err(conn)               ((conn)->last_err)#define netconn_recv_bufsize(conn)      ((conn)->recv_bufsize)/** Set the blocking status of netconn calls (@todo: write/send is missing) */#define netconn_set_nonblocking(conn, val)  do { if(val) { \  (conn)->flags |= NETCONN_FLAG_NON_BLOCKING; \} else { \  (conn)->flags &= ~ NETCONN_FLAG_NON_BLOCKING; }} while(0)/** Get the blocking status of netconn calls (@todo: write/send is missing) */#define netconn_is_nonblocking(conn)        (((conn)->flags & NETCONN_FLAG_NON_BLOCKING) != 0)/** TCP: Set the no-auto-recved status of netconn calls (see NETCONN_FLAG_NO_AUTO_RECVED) */#define netconn_set_noautorecved(conn, val)  do { if(val) { \  (conn)->flags |= NETCONN_FLAG_NO_AUTO_RECVED; \} else { \  (conn)->flags &= ~ NETCONN_FLAG_NO_AUTO_RECVED; }} while(0)/** TCP: Get the no-auto-recved status of netconn calls (see NETCONN_FLAG_NO_AUTO_RECVED) */#define netconn_get_noautorecved(conn)        (((conn)->flags & NETCONN_FLAG_NO_AUTO_RECVED) != 0)#if LWIP_SO_RCVTIMEO/** Set the receive timeout in milliseconds */#define netconn_set_recvtimeout(conn, timeout)      ((conn)->recv_timeout = (timeout))/** Get the receive timeout in milliseconds */#define netconn_get_recvtimeout(conn)               ((conn)->recv_timeout)#endif /* LWIP_SO_RCVTIMEO */#if LWIP_SO_RCVBUF/** Set the receive buffer in bytes */#define netconn_set_recvbufsize(conn, recvbufsize)  ((conn)->recv_bufsize = (recvbufsize))/** Get the receive buffer in bytes */#define netconn_get_recvbufsize(conn)               ((conn)->recv_bufsize)#endif /* LWIP_SO_RCVBUF*/#ifdef __cplusplus}#endif#endif /* LWIP_NETCONN */#endif /* __LWIP_API_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -