📄 cpuio.h
字号:
/********************************************************************* * * Copyright: * MOTOROLA, INC. All Rights Reserved. * You are hereby granted a copyright license to use, modify, and * distribute the SOFTWARE so long as this entire notice is * retained without alteration in any modified and/or redistributed * versions, and that such modified versions are clearly identified * as such. No licenses are granted by implication, estoppel or * otherwise under any patents or trademarks of Motorola, Inc. This * software is provided on an "AS IS" basis and without warranty. * * To the maximum extent permitted by applicable law, MOTOROLA * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY * ACCOMPANYING WRITTEN MATERIALS. * * To the maximum extent permitted by applicable law, IN NO EVENT * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. * * Motorola assumes no responsibility for the maintenance and support * of this software ********************************************************************//* * File: cpuio.h * Purpose: Function prototypes and memory map information. * * Notes: */#ifndef _INIT_H#define _INIT_H#include "mcf5272.h"/******************************************************************** * M5272C3 Evaluation Board Definitions ********************************************************************//* System Bus Clock Info */#define SYSTEM_CLOCK 66 /* system bus frequency in MHz */#define PERIOD 15.15 /* system bus period in ns */#define UART_BAUD 19200 /* 115200 */#define DEFAULT_BAUD_RATE UART_BAUD/* Memory Map Info */#define IMM_ADDRESS (0x10000000)#define FLASH_ADDRESS (0xFFE00000)#define FLASH_SIZE (0x00200000)#define SDRAM_ADDRESS (0x00000000)#define EXT_SRAM_ADDRESS (0x30000000)#define EXT_SRAM_SIZE (0x00080000)#define INT_SRAM_ADDRESS (0x20000000)#define INT_SRAM_SIZE (0x00001000)#define BOARD_REG_ADDRESS (0x40000000)/******************************************************************** * Global Macros ********************************************************************//* Return a pointer to the Internal Memory Map */#define mcf5272_get_immp() ((MCF5272_IMM *)(IMM_ADDRESS))/******************************************************************** * Timer period info ********************************************************************/#define TIMER_NETWORK_PERIOD 1000000000/0xFFFF /* 1 sec / max timeout */#define TIMER_BENCHMARK_PERIOD 0/******************************************************************** * Interrupt Controller Definitions ********************************************************************/#define TIMER_NETWORK_LEVEL 3#define TIMER_BENCHMARK_LEVEL 7#define FEC_LEVEL 4#define USB_EP0_LEVEL 6#define USB_EP1_LEVEL 5#define USB_EP2_LEVEL 5#define USB_EP3_LEVEL 5#define USB_EP4_LEVEL 5#define USB_EP5_LEVEL 5#define USB_EP6_LEVEL 5#define USB_EP7_LEVEL 5/******************************************************************** * Function Prototypes ********************************************************************/#ifndef ASSEMBLY_ONLYvoid mcf5272_wr_vbr (uint32);void mcf5272_wr_cacr (uint32);void mcf5272_wr_acr0 (uint32);void mcf5272_wr_acr1 (uint32);void mcf5272_wr_rambar (uint32);void mcf5272_wr_mbar (uint32);void mcf5272_wr_sr (uint32);void mcf5272_wr_movem_line(uint32*, uint32);void mcf5272_irq_enable(void);void mcf5272_irq_disable(void);void mcf5272_sim_init (MCF5272_IMM *);void mcf5272_gpio_init (MCF5272_IMM *);void mcf5272_cs_init (MCF5272_IMM *);void mcf5272_sdramc_init (MCF5272_IMM *);void mcf5272_uart_init (MCF5272_IMM *);int in_char (void);void out_char (int);int char_present (void);void exception_handler (void *);void irq_handler (void);void user_spurious_handler (void);void ext_irq1_handler (void);void ext_irq2_handler (void);void ext_irq3_handler (void);void ext_irq4_handler (void);void timer0_handler (void);void timer1_handler (void);void timer2_handler (void);void timer3_handler (void);void usart0_handler (void);void usart1_handler (void);void pli_periodic_handler (void);void pli_asynchronous_handler (void);void usb_endpoint0_handler (void);void usb_endpoint1_handler (void);void usb_endpoint2_handler (void);void usb_endpoint3_handler (void);void usb_endpoint4_handler (void);void usb_endpoint5_handler (void);void usb_endpoint6_handler (void);void usb_endpoint7_handler (void);void dma_controller_handler (void);void ethernet_rx_handler (void);void ethernet_tx_handler (void);void ethernet_handler (void);void qspi_handler (void);void ext_irq5_handler (void);void ext_irq6_handler (void);void watchdog_handler (void);#endif /********************************************************************/#endif /* _INIT_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -