📄 flashdev.c
字号:
/* This file contains all of the flash support code that does not need to be relocated to RAM. Two separate files (flash.c and flashpic.c) are maintained because under certain compilers, they may need to be compiled with different options to be made position independent. NOTE: THESE FUNCTIONS ARE NOT RE-ENTRANT!!! All of the FLASH routines assume they can copy themselves into the array FlashFunc[]; hence, only one operation can be active at any time.*/#include "config.h"#if INCLUDE_FLASH#include "cpu.h"#include "flashdev.h"#include "flash.h"#include "stddefs.h"extern int FlashtypeStrata_8x32();extern int EndFlashtypeStrata_8x32();extern int FlasheraseStrata_8x32();extern int EndFlasheraseStrata_8x32();extern int FlashwriteStrata_8x32();extern int EndFlashwriteStrata_8x32();extern int FlashewriteStrata_8x32();extern int EndFlashewriteStrata_8x32();/* FlashXXXFbufYYY[]: Where XXX is the function to be stored in the buffer and YYY is the device that the function is to operate on. These arrays are loaded with the flash operation function (TYPE, ERASE, WRITE & EWRITE) that must run in different memory space than the device that is being operated on. Recall that to operate on the flash, you cannot be executing out of it. The flash functions are copied here, then executed through a function pointer flashfunc which is set (in FlashInit) to point to the buffer.*/long FlashTypeFbufStrata[FLASHFUNCSIZE];long FlashWriteFbufStrata[FLASHFUNCSIZE*2];long FlashEraseFbufStrata[FLASHFUNCSIZE];long FlashEwriteFbufStrata[FLASHFUNCSIZE];/* FlashNamId[]: Used to correlate between the ID and a string representing the name of the flash device.*/struct flashdesc FlashNamId[] = { { DEVICE_28F320J3, "INTEL-28F320J3" }, { DEVICE_28F640J3, "INTEL-28F640J3" }, { DEVICE_28F128J3, "INTEL-28F128J3" }, { 0, 0 }};/* Sector Size table: * 28F320J3A: 32 128Kbyte sectors * 28F640J3A: 64 128Kbyte sectors * 28F128J3A: 128 128Kbyte sectors * * This configuration is 4 side-by-side 8-bit devices. * Since we have 4 in parallel, then each 32-bit sector * is 512Kbytes... */int SectorSizesStrata[] = { 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000,#if SUPPORT640 | SUPPORT128 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000,#endif#if SUPPORT128 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000, 0x80000,#endif};struct sectorinfo sinfoStrata[sizeof(SectorSizesStrata)/sizeof(int)];/* FlashInit(): Initialize data structures for each bank of flash...*/intFlashInit(){ int i, snum; uchar *begin; struct flashinfo *fbnk; snum = 0; FlashCurrentBank = 0; /* Copy functions to ram space... */ /* Note that this MUST be done when cache is disabled to assure that */ /* the RAM is occupied by the designated block of code. */ if (flashopload((ulong *)FlashtypeStrata_8x32, (ulong *)EndFlashtypeStrata_8x32, FlashTypeFbufStrata,sizeof(FlashTypeFbufStrata)) < 0) return(-1); if (flashopload((ulong *)FlasheraseStrata_8x32, (ulong *)EndFlasheraseStrata_8x32, FlashEraseFbufStrata,sizeof(FlashEraseFbufStrata)) < 0) return(-1); if (flashopload((ulong *)FlashewriteStrata_8x32, (ulong *)EndFlashewriteStrata_8x32, FlashEwriteFbufStrata,sizeof(FlashEwriteFbufStrata)) < 0) return(-1); if (flashopload((ulong *)FlashwriteStrata_8x32, (ulong *)EndFlashwriteStrata_8x32, FlashWriteFbufStrata,sizeof(FlashWriteFbufStrata)) < 0) return(-1); /* Initialize each bank of flash... */ fbnk = &FlashBank[0]; fbnk->id = DEVICE_28F320J3; /* Device id. */ fbnk->base = (uchar *)FLASH_BANK0_BASE_ADDR;/* Base address of bank. */ /* Number of sectors: */ fbnk->sectorcnt = sizeof(SectorSizesStrata)/sizeof(int); /* End address of bank: */ fbnk->end = fbnk->base + (0x80000 * fbnk->sectorcnt) - 1; fbnk->width = 4; /* Width (in bytes). */ fbnk->fltype = (int(*)())FlashTypeFbufStrata; /* Flashtype(). */ fbnk->flerase = (int(*)())FlashEraseFbufStrata; /* Flasherase(). */ fbnk->flwrite = (int(*)())FlashWriteFbufStrata; /* Flashwrite(). */ fbnk->flewrite = (int(*)())FlashEwriteFbufStrata; /* Flashewrite(). */ fbnk->sectors = sinfoStrata; /* Ptr to sector size tbl. */ begin = fbnk->base; for(i=0;i<fbnk->sectorcnt;i++,snum++) { sinfoStrata[i].snum = snum; sinfoStrata[i].size = SectorSizesStrata[i]; sinfoStrata[i].begin = begin; sinfoStrata[i].end = sinfoStrata[i].begin + sinfoStrata[i].size - 1; sinfoStrata[i].protected = 0; begin += SectorSizesStrata[i]; } /* Protect the sectors specifed by FLASH_PROTECT_RANGE: */ sectorProtect(FLASH_PROTECT_RANGE,1); return(0);}#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -