4x8c反白与光标.c

OCM4X8C显示程序 新华龙单片机 山东济南

#include <reg52.h>

#define uint  unsigned int
#define uchar unsigned char
#define x1    0x80
#define x2    0x88
#define y     0x80
#define comm  0
#define dat   1

sbit rs = P0^0;   //H=data; L=command;
sbit rw = P0^1;   //H=read; L=write;
sbit  e = P0^2;   //input enable;
sbit psb= P0^3;   //H=并口; L=串口;
sbit rst= P0^4;   //Reset Signal 低电平有效

sbit busy=P1^7;   //lcd busy bit

void wr_lcd (uchar dat_comm,uchar content);
void chk_busy (void);
void delay (uint us);

uchar code tab1[]={
"本系列中文模块内"
"任意位置反白显示"
"置二级字库，可在"
"使用更方便更灵活"
};

uchar code tab2[]={
"金鹏科技有限公司"
"Golden Palm TECH"
"奥可拉液晶显示器"
"TEL:[phone]"
};


/*------------------初始化-----------------*/
void init_lcd (void)
{
  rst=1;
  psb=1;
  wr_lcd (comm,0x30);  /*30---基本指令动作*/   
  wr_lcd (comm,0x01);  /*清屏，地址指针指向00H*/
  wr_lcd (comm,0x06);  /*光标的移动方向*/
  wr_lcd (comm,0x0c);  /*开显示，关游标*/
}
/*---------------显示汉字或字符----------------*/
void chn_disp (uchar code *chn)
{
  uchar i,j;
  wr_lcd (comm,0x30);
  wr_lcd (comm,0x80);
  for (j=0;j<4;j++)
  {
    for (i=0;i<16;i++)
    wr_lcd (dat,chn[j*16+i]);
  }
}
/*----------------显示图形-----------------*/
void img_disp (uchar code *img)
{
  uchar i,j;
  for(j=0;j<32;j++)
  {
    for(i=0;i<8;i++)
    {
      wr_lcd (comm,0x34);
      wr_lcd (comm,y+j);
      wr_lcd (comm,x1+i);
      wr_lcd (comm,0x30);
      wr_lcd (dat,img[j*16+i*2]);
      wr_lcd (dat,img[j*16+i*2+1]);
    }
  }
  for(j=32;j<64;j++)
  {
    for(i=0;i<8;i++)
    {
      wr_lcd (comm,0x34);
      wr_lcd (comm,y+j-32);
      wr_lcd (comm,x2+i);
      wr_lcd (comm,0x30);
      wr_lcd (dat,img[j*16+i*2]);
      wr_lcd (dat,img[j*16+i*2+1]);
    }
  }
  wr_lcd (comm,0x36);
}
/*--------------显示点阵----------------*/
void lat_disp (uchar data1,uchar data2)
{
  uchar i,j,k,x;
  x=x1;
  for(k=0;k<2;k++)
  {
    for(j=0;j<16;j++)
    {
      for(i=0;i<8;i++)
      {
        wr_lcd (comm,0x34);
        wr_lcd (comm,y+j*2);
        wr_lcd (comm,x+i);
        wr_lcd (comm,0x30);
        wr_lcd (dat,data1);
        wr_lcd (dat,data1);
      }
      for(i=0;i<8;i++)
      {
        wr_lcd (comm,0x34);
        wr_lcd (comm,y+j*2+1);
        wr_lcd (comm,x+i);
        wr_lcd (comm,0x30);
        wr_lcd (dat,data2);
        wr_lcd (dat,data2);
      }
    }
    x=x2;
  }
  wr_lcd (comm,0x36);
}
/*-----------------------------------------------*/
//当data1=0xff,data2=0xff时,在x0,y0处反白显示16xl*yl.
//当data1=0xff,data2=0x00时,在x0,y0处前半反白显示8xl*yl.
//当data1=0x00,data2=0xff时,在x0,y0处后半反白显示8xl*yl.
void con_disp (uchar data1,uchar data2,uchar x0,uchar y0,uchar xl,uchar yl)
{
  uchar i,j;
  for(j=0;j<yl;j++)
  {
    for(i=0;i<xl;i++)
    {
      wr_lcd (comm,0x34);
      wr_lcd (comm,y0+j);
      wr_lcd (comm,x0+i);
      wr_lcd (comm,0x30);
      wr_lcd (dat,data1);
      wr_lcd (dat,data2);
    }
  }
  wr_lcd (comm,0x36);
}
/*--------------------------------------------*/
//当data1=0xff,data2=0x00时,在x0,y0处显示前半光标.
//当data1=0x00,data2=0xff时,在x0,y0处显示后半光标.
//当data1=0x00,data2=0x00时,在x0,y0处不显示光标.
//y0=0x8f or y0=0x9f.
void cur_disp (uchar data1,uchar data2,uchar x0,uchar y0)
{
  wr_lcd (comm,0x34);
  wr_lcd (comm,y0);
  wr_lcd (comm,x0);
  wr_lcd (comm,0x30);
  wr_lcd (dat,data1);
  wr_lcd (dat,data2);
  wr_lcd (comm,0x36);
}
/*--------------清DDRAM------------------*/
void clrram (void)
{
  wr_lcd (comm,0x30);
  wr_lcd (comm,0x01);
}
/*---------------------------------------*/
void wr_lcd (uchar dat_comm,uchar content)
{
  chk_busy ();
  if(dat_comm)
   {
    rs=1;   //data
    rw=0;   //write
   }
  else 
   {
    rs=0;   //command
    rw=0;   //write
   }
  P1=content;   //output data or comm
  e=1;
  ;
  e=0;
}

void chk_busy (void)
{
  P1=0xff;
  rs=0;
  rw=1;
  e =1;
  while(busy==1);
  e =0;
}

void delay (uint us)   //delay time
{
  while(us--);
}
void delay1 (uint ms)
{
  uint i,j;
  for(i=0;i<ms;i++)
  for(j=0;j<15;j++)
  delay(1);
}
/*------------------主程序--------------------*/
void main ()
{
  uchar i;
  init_lcd ();
  while (1)
  {
/*    lat_disp (0x00,0x00);
    chn_disp (tab1);
    con_disp (0xff,0x00,0x8c,0x80,2,16);
    delay1 (8000);
  }
}*/
    lat_disp (0x00,0x00);
    chn_disp (tab2);
    for(i=0;i<8;i++)
    {
      cur_disp (0xff,0x00,0x88+i,0x8f);
      delay1 (2000);
      cur_disp (0x00,0x00,0x88+i,0x8f);
      cur_disp (0x00,0xff,0x88+i,0x8f);
      delay1 (2000);
      cur_disp (0x00,0x00,0x88+i,0x8f);
    }
    for(i=0;i<8;i++)
    {
      cur_disp (0xff,0x00,0x88+i,0x9f);
      delay1 (2000);
      cur_disp (0x00,0x00,0x88+i,0x9f);
      cur_disp (0x00,0xff,0x88+i,0x9f);
      delay1 (2000);
      cur_disp (0x00,0x00,0x88+i,0x9f);
    }
  }
}