testmerge.in

mpi并行计算的c++代码 可用vc或gcc编译通过 可以用来搭建并行计算试验环境

#! @PERL@
# -*- Mode: Perl; -*-
#
#  (C) 2004 by Argonne National Laboratory.
#      See COPYRIGHT in top-level directory.
#
#
# This file provides a way to merge a template file with a set of
# code fragments.  This makes it simple to generate many related tests
# from a single test harness, while ending up with relatively simple code
# in case it is necessary to debug the code.
# The template file uses an XML-like notation to mark off places for code.
# Specifically, lines of the form
#    <name/>
# are replaced from a definition file.  The template is XML-like because
# angle brackets and ampersands can be freely used as long as they don't
# match the perl pattern <\w*\/> (which no valid C, C++, or Fortran code will)
#
# The file of definitions has the following form, also in an XML-like 
# format (for simple parsing)
#    <TESTDEFN filename="fname">
#    <blockname>
#      definition
#    </blockname>
#    ...
#    </TESTDEFN>
# where "blockname" is an arbitrary name (matching the perl expression \w*)
# that matches the names in the template file.  
# TESTDEFN is a required field
#
# Possible extensions:
#    Common definitions for all files (allows a common template for
#      multiple sets of merges)
#    Allow the *template* to define some names (eg, <var>value</var>)
#      that are replaced in the generated file.
#    
# ----------------------------------------------------------------------------
# Global variables
$debug = 0;

$lang = "Fortran";   
%knownLang = ( "Fortran" => 1, "C" => 1, "C++" => 1 );
#$lang = "C";
#$lang = "C++";

# Definitions
%Definitions = ();
# Global definitions are for all files, and can contain standard comments,
# initializations, and other data
%GlobalDefinitions = ();
# Read a definition file
# ReadDefinition( filename )
# Places the definitions into %Definitions{name} => content
sub ReadDefinition {
    my $DFD = $_[0];

    while (<$DFD>) {
	# Check for end-of-description
	if (/<\/TESTDEFN>/) { last; }

	# match definition name
	if (/<(\w*)>/) {
	    my $name = $1;
	    my $defn = "";
	    my $found = 0;
	    while (<$DFD>) {
		if (/<\/$name>/) { $found = 1; last; }
		s/\r//g;   # Remove any extraneous characters
		$defn .= $_;
	    }
	    # If we didn't close the definition, generate an error message
	    if (! $found) {
		print STDERR "Read to end-of-file while looking for </$name>\n";
	    }
	    $Definitions{$name} = $defn;
	}
	else {
	    # Skip (blank space, comment, etc)
	    next;
	}
    }
    
}

# ReadGlobalDefinitions( filename )
sub ReadGlobalDefinitions {
    my $filename = $_[0];
    # Save Definitions, if any
    my %saveDefinitions = %Definitions;
    # Reset Definitions to hold the current global set
    %Definitions = %GlobalDefinitions;

    my $DFD = "DFD";
    open $DFD, "<$filename" || die "Could not open global definition file $filename\n";
    print "Opening $filename..\n";
    &ReadDefinition( $DFD );
    close $DFD;
    %GlobalDefinitions = %Definitions;
    %Definitions = %saveDefinitions;
    # Print the new definitions if requested.
    if ($debug) {
	foreach my $key (keys(%GlobalDefinitions)) {
	    my $val = $GlobalDefinitions{$key};
	    print "$key => $val\n";
	}
    }
}

# ---------------------------------------------------------------------------
# MergeTemplate
# Read a template and merge the output
# MergeTemplate( template file, output file )
# Preserve indentation
sub MergeTemplate {
    my $templateFilename = $_[0];
    my $outputFilename   = $_[1];

    open IFD, "<$templateFilename" || die "Cannot open $templateFilename\n";
    open OFD, ">$outputFilename" || die "Cannot open $outputFilename\n";

    while (<IFD>) {
	s/\r//;
	my $loopLimit = 20;
	while (/(\s*)<(\w*)\/>/) {
	    my $indent = $1;
	    my $name = $2;
	    $indent =~ s/\s*\n//g;
	    if ($loopLimit-- <= 0) {
		print STDERR "Exceeded loop limit while writing $outputFilename\n";
		print STDERR "Searching for $name in $_";
		last;
	    }
	    if (defined($Definitions{$name})) {
		my $defn = $Definitions{$name};
		my $newdefn = "";
		# Add indentation to definition; substitute any defintions
		foreach my $line (split(/\n/,$defn)) {
		    print "Looking at |$line|\n" if $debug;
		    $newdefn .= $indent . $line . "\n";
		}
		chop $newdefn;
		print "Replacing <$name> with |$newdefn|\n" if $debug;
		s/$indent<$name\/>/$newdefn/;   # Only do one at a time
	    }
	    elsif (defined($GlobalDefinitions{$name})) {
		# local definitions can override any global definitions
		my $defn = $GlobalDefinitions{$name};
		my $newdefn = "";
		# Add indentation to definition
		foreach my $line (split(/\n/,$defn)) {
		    $newdefn .= $indent . $line . "\n";
		}
		print "Replacing <$name> with |$newdefn|\n" if $debug;
		chop $newdefn;
		s/$indent<$name\/>/$newdefn/;   # Only do one at a time
	    }
	    else {
		# Unknown name!
		print STDERR "Unknown name $name in template file when creating $outputFilename!\n";
		last;
	    }
	}
	&printLine( OFD, $_ );
    }
    close OFD;
    close IFD;
}
# ---------------------------------------------------------------------------
# ReadAndMerge( description file, template file )
sub ReadAndMerge {
    my $filename = $_[0];
    my $templateFile = $_[1];

    $DFD = "DFD";
    open $DFD, "<$filename" || die "Can not open $filename\n";
    
    while (<$DFD>) {
	s/#.*//;            # Remove comments
	# Read until a TESTDEFN line
	if (/<TESTDEFN\s+filename=\"(.*)\">/) {
	    my $outputFile = $1;
	    %Definitions = ();
	    # Read until </TESTDEFN>
	    &ReadDefinition( $DFD );
	    # Create the merged file
	    &MergeTemplate( $templateFile, $outputFile );
	}
	elsif (/<LANG>([\w\+]*)<\/LANG>/) {
	    # Special for language definition
	    $lang = $1;
	    if (!defined($knownLang{$lang})) {
		print STDERR "Unknown language $lang\n"; 
	    }
	}
	elsif (/<(\w*)>/) {
	    my $name = $1;
	    my $defn = "";
	    # read this as a global definition
	    while (<$DFD>) {
		if (/<\/$name>/) { last; }
		s/\r//;
		$defn .= $_;
	    }
	    if (eof($DFD)) { print STDERR "found EOF before end of $name\n"; }
	    $GlobalDefinitions{$name} = $defn;
	}
    }
    close $DFD;

}
# --------------------------------------------------------------------------
# Debug
sub PrintDefinitions {
    foreach my $name (keys(%Definitions)) {
        print "<$name>\n";
        my $defn = $Definitions{$name};
        # Here we could consider doing replacement for embedded <name>...</name>,
        # for things like arguments.
        print $defn;
        print "</$name>\n";
    }
}
# --------------------------------------------------------------------------
# printLine handles any continuation conventions
# printLine ( FD, lines )
# Note that a very simple approach works for Fortran because blanks
 # are ignored.  However, we will try to make the code easier to read
sub printLine {
    my $OFD   = $_[0];
    my $lines = $_[1];

    # Make sure that we get the current conventions
    if ($lang eq "Fortran") {
	$maxPrintLine = 72;
	$postLine     = "  &";
	$preLine      = "     &";
    }
    elsif ($lang eq "C" || $lang eq "C++") {
	$maxPrintLine = 180;
	$postLine     = "";
	$preLine      = "\t";
    }
    
    foreach my $line (split(/\n/,$lines)) {
	# Compute length
	my $length = length($line);
	while ($length > $maxPrintLine) {
	    # For Fortran 90 and C/C++, lines must be
	    # broken at whitespace.  Fortran 77 ignores whitespace,
	    my $subline = substr $line, 0, $maxPrintLine;
	    # Now, break subline at the last non-letter
	    if ($subline =~ /(.*)([^\w]\S*)$/) {
		$subline = $1;
		$line    = $2 . $line;
		# Add blanks to end of the subline to match what was stripped
		# off
		my $len = length($2);
		for (my $i=0; $i < $len; $i++) { 
		    $subline .= " ";
		}
	    }
	    print $OFD $subline . $postLine . "\n";

	    $line = substr $line, $maxPrintLine;
	    $line = $preLine . $line;
	    $length = length($line);
	}
        print $OFD $line . "\n";
    }
}
# --------------------------------------------------------------------------
# Process the file
# Still to do:
#   Allow multiple definition files, to allow for common definitions
#   for such things as headers
my $defnFile = "";
my $tmplFile = "";
my $posCount = 0;
for (@ARGV) {
    if (/-defn=(.*)/) {
	my $extraFile = $1;
	&ReadGlobalDefinitions( $extraFile );
    }
    elsif (/-lang=(.*)/) {
	$lang = $1;
	if (!defined($knownLang{$lang})) {
	    print STDERR "Unknown language $lang\n";
	    exit 1;
	}
    }
    elsif (/^-/) {
	print STDERR "Unrecognized argument $_\n";
	exit 1;
    }
    else {
	if ($posCount == 0) {
	    $defnFile = $_;
	}
	elsif ($posCount == 1) {
	    $tmplFile = $_;
	}
	else {
	    print STDERR "Too many arguments ($_)\n";
	    exit 1;
	}
	$posCount ++;
    }
}

if ($defnFile eq "" || $tmplFile eq "") {
    print STDERR "testmerge [ -defn=name ] defintion-file template-file \n";
    exit 1;
}

&ReadAndMerge( $defnFile, $tmplFile );