z8536.h

IXP425的BSP代码

/* z8536.h - zilog CIO (counter,timer,parallel i/o chip) */

/* Copyright 1984-1992 Wind River Systems, Inc. */
/*
modification history
--------------------
01g,22sep92,rrr  added support for c++
01f,26may92,rrr  the tree shuffle
01e,04oct91,rrr  passed through the ansification filter
		  -changed TINY and UTINY to INT8 and UINT8
		  -changed copyright notice
01d,05oct90,shl  added copyright notice.
                 made #endif ANSI style.
01c,10jan90,shl  merged with z8036.h.
01b,11sep89,dab  changed U8 to UINT8.
01a,10aug88,rml  written
*/

/* Note: in the following, the value '0x00' has been replaced by 'ZERO'.
   This has been done to provide a way to avoid the 'clr.b' instruction
   on the 68000/10 cpu. 'ZERO' should be defined to be a memory location
   which holds the value '0x00', this will cause compilers to generate
   memory to memory transfers rather than clear instructions. */

#ifndef __INCz8536h
#define __INCz8536h

#ifdef __cplusplus
extern "C" {
#endif

/* internal register addresses */

#define  ZCIO_MIC          ((UINT8) ZERO)  /* Master Interrupt Control */
#define  ZCIO_MCC          ((UINT8) 0x01)  /* Master Configuration Control */
#define  ZCIO_PAIV         ((UINT8) 0x02)  /* Port A Interrupt Vector */
#define  ZCIO_PBIV         ((UINT8) 0x03)  /* Port B Interrupt Vector */
#define  ZCIO_CTIV         ((UINT8) 0x04)  /* Counter/Timer Interrupt Vector */

#define  ZCIO_PCDPP        ((UINT8) 0x05)  /* Port C Data Path Polarity */
#define  ZCIO_PCDD         ((UINT8) 0x06)  /* Port C Data Direction */
#define  ZCIO_PCSIOC       ((UINT8) 0x07)  /* Port C Special I/O Control */
#define  ZCIO_PACS         ((UINT8) 0x08)  /* Port A Command and Status */
#define  ZCIO_PBCS         ((UINT8) 0x09)  /* Port B Command and Status */

#define  ZCIO_CT1CS        ((UINT8) 0x0a)  /* C/T 1 Command and Status */
#define  ZCIO_CT2CS        ((UINT8) 0x0b)  /* C/T 2 Command and Status */
#define  ZCIO_CT3CS        ((UINT8) 0x0c)  /* C/T 3 Command and Status */

#define  ZCIO_PAD          ((UINT8) 0x0d)  /* Port A Data */
#define  ZCIO_PBD          ((UINT8) 0x0e)  /* Port B Data */
#define  ZCIO_PCD          ((UINT8) 0x0f)  /* Port C Data */

#define  ZCIO_CT1CCMSB     ((UINT8) 0x10)  /* C/T 1 Current Count (MS Byte) */
#define  ZCIO_CT1CCLSB     ((UINT8) 0x11)  /* C/T 1 Current Count (LS Byte) */
#define  ZCIO_CT2CCMSB     ((UINT8) 0x12)  /* C/T 2 Current Count (MS Byte) */
#define  ZCIO_CT2CCLSB     ((UINT8) 0x13)  /* C/T 2 Current Count (LS Byte) */
#define  ZCIO_CT3CCMSB     ((UINT8) 0x14)  /* C/T 3 Current Count (MS Byte) */
#define  ZCIO_CT3CCLSB     ((UINT8) 0x15)  /* C/T 3 Current Count (LS Byte) */

#define  ZCIO_CT1TCMSB     ((UINT8) 0x16)  /* C/T 1 Time Constant (MS Byte) */
#define  ZCIO_CT1TCLSB     ((UINT8) 0x17)  /* C/T 1 Time Constant (LS Byte) */
#define  ZCIO_CT2TCMSB     ((UINT8) 0x18)  /* C/T 2 Time Constant (MS Byte) */
#define  ZCIO_CT2TCLSB     ((UINT8) 0x19)  /* C/T 2 Time Constant (LS Byte) */
#define  ZCIO_CT3TCMSB     ((UINT8) 0x1a)  /* C/T 3 Time Constant (MS Byte) */
#define  ZCIO_CT3TCLSB     ((UINT8) 0x1b)  /* C/T 3 Time Constant (LS Byte) */

#define  ZCIO_CT1MS        ((UINT8) 0x1c)  /* C/T 1 Mode Specification */
#define  ZCIO_CT2MS        ((UINT8) 0x1d)  /* C/T 2 Mode Specification */
#define  ZCIO_CT3MS        ((UINT8) 0x1e)  /* C/T 3 Mode Specification */

#define  ZCIO_CV           ((UINT8) 0x1f)  /* Current Vector */

#define  ZCIO_PAMS         ((UINT8) 0x20)  /* Port A Mode Specification */
#define  ZCIO_PAHS         ((UINT8) 0x21)  /* Port A Handshake Specification */
#define  ZCIO_PADPP        ((UINT8) 0x22)  /* Port A Data Path Polarity */
#define  ZCIO_PADD         ((UINT8) 0x23)  /* Port A Data Direction */
#define  ZCIO_PASIOC       ((UINT8) 0x24)  /* Port A Special I/O Control */
#define  ZCIO_PAPP         ((UINT8) 0x25)  /* Port A Pattern Polarity */
#define  ZCIO_PAPT         ((UINT8) 0x26)  /* Port A Pattern Transition */
#define  ZCIO_PAPM         ((UINT8) 0x27)  /* Port A Pattern Mask */

#define  ZCIO_PBMS         ((UINT8) 0x28)  /* Port B Mode Specification */
#define  ZCIO_PBHS         ((UINT8) 0x29)  /* Port B Handshake Specification */
#define  ZCIO_PBDPP        ((UINT8) 0x2a)  /* Port B Data Path Polarity */
#define  ZCIO_PBDD         ((UINT8) 0x2b)  /* Port B Data Direction */
#define  ZCIO_PBSIOC       ((UINT8) 0x2c)  /* Port B Special I/O Control */
#define  ZCIO_PBPP         ((UINT8) 0x2d)  /* Port B Pattern Polarity */
#define  ZCIO_PBPT         ((UINT8) 0x2e)  /* Port B Pattern Transition */
#define  ZCIO_PBPM         ((UINT8) 0x2f)  /* Port B Pattern Mask */


/* If a particular CPU board uses Zilog 8036 counter/timer/parallel I/O chip,
 * Z8036 should be defined in {target}/sysLib.h. */

#ifdef Z8036

#define  Z8036_MIC(base)          ((char *) ((base) + ZCIO_MIC))
#define  Z8036_MCC(base)          ((char *) ((base) + ZCIO_MCC))
#define  Z8036_PAIV(base)         ((char *) ((base) + ZCIO_PAIV))
#define  Z8036_PBIV(base)         ((char *) ((base) + ZCIO_PBIV))
#define  Z8036_CTIV(base)         ((char *) ((base) + ZCIO_CTIV))
#define  Z8036_PCDPP(base)        ((char *) ((base) + ZCIO_PCDPP))
#define  Z8036_PCDD(base)         ((char *) ((base) + ZCIO_PCDD))
#define  Z8036_PCSIOC(base)       ((char *) ((base) + ZCIO_PCSIOC))
#define  Z8036_PACS(base)         ((char *) ((base) + ZCIO_PACS))
#define  Z8036_PBCS(base)         ((char *) ((base) + ZCIO_PBCS))
#define  Z8036_CT1CS(base)        ((char *) ((base) + ZCIO_CT1CS))
#define  Z8036_CT2CS(base)        ((char *) ((base) + ZCIO_CT2CS))
#define  Z8036_CT3CS(base)        ((char *) ((base) + ZCIO_CT3CS))
#define  Z8036_PAD(base)          ((char *) ((base) + ZCIO_PAD))
#define  Z8036_PBD(base)          ((char *) ((base) + ZCIO_PBD))
#define  Z8036_PCD(base)          ((char *) ((base) + ZCIO_PCD))
#define  Z8036_CT1CCMSB(base)     ((char *) ((base) + ZCIO_CT1CCMSB))
#define  Z8036_CT1CCLSB(base)     ((char *) ((base) + ZCIO_CT1CCLSB))
#define  Z8036_CT2CCMSB(base)     ((char *) ((base) + ZCIO_CT2CCMSB))
#define  Z8036_CT2CCLSB(base)     ((char *) ((base) + ZCIO_CT2CCLSB))
#define  Z8036_CT3CCMSB(base)     ((char *) ((base) + ZCIO_CT3CCMSB))
#define  Z8036_CT3CCLSB(base)     ((char *) ((base) + ZCIO_CT3CCLSB))
#define  Z8036_CT1TCMSB(base)     ((char *) ((base) + ZCIO_CT1TCMSB))
#define  Z8036_CT1TCLSB(base)     ((char *) ((base) + ZCIO_CT1TCLSB))
#define  Z8036_CT2TCMSB(base)     ((char *) ((base) + ZCIO_CT2TCMSB))
#define  Z8036_CT2TCLSB(base)     ((char *) ((base) + ZCIO_CT2TCLSB))
#define  Z8036_CT3TCMSB(base)     ((char *) ((base) + ZCIO_CT3TCMSB))
#define  Z8036_CT3TCLSB(base)     ((char *) ((base) + ZCIO_CT3TCLSB))
#define  Z8036_CT1MS(base)        ((char *) ((base) + ZCIO_CT1MS))
#define  Z8036_CT2MS(base)        ((char *) ((base) + ZCIO_CT2MS))
#define  Z8036_CT3MS(base)        ((char *) ((base) + ZCIO_CT3MS))
#define  Z8036_CV(base)           ((char *) ((base) + ZCIO_CV))
#define  Z8036_PAMS(base)         ((char *) ((base) + ZCIO_PAMS))
#define  Z8036_PAHS(base)         ((char *) ((base) + ZCIO_PAHS))
#define  Z8036_PADPP(base)        ((char *) ((base) + ZCIO_PADPP))
#define  Z8036_PADD(base)         ((char *) ((base) + ZCIO_PADD))
#define  Z8036_PASIOC(base)       ((char *) ((base) + ZCIO_PASIOC))
#define  Z8036_PAPP(base)         ((char *) ((base) + ZCIO_PAPP))
#define  Z8036_PAPT(base)         ((char *) ((base) + ZCIO_PAPT))
#define  Z8036_PAPM(base)         ((char *) ((base) + ZCIO_PAPM))
#define  Z8036_PBMS(base)         ((char *) ((base) + ZCIO_PBMS))
#define  Z8036_PBHS(base)         ((char *) ((base) + ZCIO_PBHS))
#define  Z8036_PBDPP(base)        ((char *) ((base) + ZCIO_PBDPP))
#define  Z8036_PBDD(base)         ((char *) ((base) + ZCIO_PBDD))
#define  Z8036_PBSIOC(base)       ((char *) ((base) + ZCIO_PBSIOC))
#define  Z8036_PBPP(base)         ((char *) ((base) + ZCIO_PBPP))
#define  Z8036_PBPT(base)         ((char *) ((base) + ZCIO_PBPT))
#define  Z8036_PBPM(base)         ((char *) ((base) + ZCIO_PBPM))

#endif	/* Z8036 */


/*  Counter/Timer Mode Specification register values (C/T 1, 2 and 3) */

#define  ZCIO_CTMS_DCS_PO  ((UINT8) ZERO)  /* Pulse Output */
#define  ZCIO_CTMS_DCS_OSO ((UINT8) 0x01)  /* One-Shot Output */
#define  ZCIO_CTMS_DCS_SWO ((UINT8) 0x02)  /* Square-Wave Output */
#define  ZCIO_CTMS_DCS     ((UINT8) 0x03)  /* output Duty Cycle Selects */
#define  ZCIO_CTMS_REB     ((UINT8) 0x04)  /* Retrigger Enable Bit */
#define  ZCIO_CTMS_EGE     ((UINT8) 0x08)  /* External Gate Enable */
#define  ZCIO_CTMS_ETE     ((UINT8) 0x10)  /* External Trigger Enable */
#define  ZCIO_CTMS_ECE     ((UINT8) 0x20)  /* External Count Enable */
#define  ZCIO_CTMS_EOE     ((UINT8) 0x40)  /* External Output Enable */
#define  ZCIO_CTMS_CSC     ((UINT8) 0x80)  /* Continuous Single Cycle */