rtl81x9.c

IXP425的BSP代码

/*			if (rxData->rxStatusFlags & (RTL_RX_BAD_SYMBOL|
										 RTL_RX_RUNT|
										 RTL_RX_TOO_LONG|
										 RTL_RX_CRC_ERROR|
										 RTL_RX_BAD_ALIGN)) 
				{*/
				DRV_LOG (DRV_DEBUG_ALL, "In rtl81x9HandleRecvInt, RTL recevie not OK, some error\r\n ", 1, 2, 3, 4, 5, 6);
				/*rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB, RTL_WIN_0);
				rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB|
							RTL_CMD_RX_ENB, RTL_WIN_0);*/
				rtl81x9CsrWriteByte(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB, RTL_WIN_0);
				rtl81x9CsrWriteByte(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB|RTL_CMD_RX_ENB, RTL_WIN_0);

				rtl81x9CsrWriteLong(pDrvCtrl, RTL_REGS_RX_BUF, MMU_OFFSET((ULONG)(pDrvCtrl->ptrRxBufSpace)), RTL_WIN_0);
				/*rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_RX_BUF_PTR, cur_rx - 16, RTL_WIN_0);*/
				cur_rx = 0;
				/*DRV_LOG (DRV_DEBUG_ALL, "RxHandError:rxData->rxStatusFlags=%x ", rxData->rxStatusFlags, 2, 3, 4, 5, 6);
				i = rtl81x9CsrReadWord (pDrvCtrl, RTL_REGS_INTR_STATUS, NONE);
                           	DRV_LOG (DRV_DEBUG_INT, "ISR %x ", i,0,0,0,0,0);*/
					 
				rtl81x9CsrWriteLong (pDrvCtrl, RTL_REGS_RX_CONFIG, pDrvCtrl->reg_rcr, RTL_WIN_0); 
				
				
/*				}*/
			break;
			}

/*		DRV_LOG (DRV_DEBUG_RX, "HandleRecvInt, got a good packet\r\n", 1, 2, 3, 4, 5, 6);*/

		/* No errors; receive the packet. */	
    	len = rxData->rxPktLen;		/* get packet length */

/*		DRV_LOG (DRV_DEBUG_RX, "HandleRecvInt, packet length:%d\r\n", len, 2, 3, 4, 5, 6);*/

		rx_bytes += len + 4;
		
		/*
		 * XXX The RealTek chip includes the CRC with every
		 * received frame, and there's no way to turn this
		 * behavior off (at least, I can't find anything in
	 	 * the manual that explains how to do it) so we have
		 * to trim off the CRC manually.
		 */
		len -= RTL_CRC_SIZE;

		/*
		 * Avoid trying to read more bytes than we know
		 * the chip has prepared for us.
		 */
		/*if (rx_bytes > max_bytes)
		{
			DRV_LOG (DRV_DEBUG_ALL, "MAX bytes error rx_bytes=%x max_bytes=%x\n", rx_bytes, max_bytes, 0, 0, 0, 0);			
			break; unknow what do
		}*/





			if(len>1518) {

				/*rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB, RTL_WIN_0);
				rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB|
							RTL_CMD_RX_ENB, RTL_WIN_0);*/
				rtl81x9CsrWriteByte(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB, RTL_WIN_0);
				rtl81x9CsrWriteByte(pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_TX_ENB|
							RTL_CMD_RX_ENB, RTL_WIN_0);

				rtl81x9CsrWriteLong(pDrvCtrl, RTL_REGS_RX_BUF, MMU_OFFSET((ULONG)(pDrvCtrl->ptrRxBufSpace)), RTL_WIN_0);
				/*rtl81x9CsrWriteWord(pDrvCtrl, RTL_REGS_RX_BUF_PTR, cur_rx - 16, RTL_WIN_0);*/
				cur_rx = 0;
				DRV_LOG (DRV_DEBUG_ALL, "RxHandError:rxData->rxStatusFlags=%x ", rxData->rxStatusFlags, 2, 3, 4, 5, 6);
				/*i = rtl81x9CsrReadWord (pDrvCtrl, RTL_REGS_INTR_STATUS, NONE);*/
               	                /*DRV_LOG (DRV_DEBUG_INT, "ISR %x ", i,0,0,0,0,0);*/
					 
				rtl81x9CsrWriteLong (pDrvCtrl, RTL_REGS_RX_CONFIG, pDrvCtrl->reg_rcr, RTL_WIN_0); 
				




			       DRV_LOG (DRV_DEBUG_ALL, "MAX bytes error rx_bytes>1518=%x \n", len, 0, 0, 0, 0, 0);			
                               break;
				}	


/*	DRV_LOG (DRV_DEBUG_LOAD, "Rx_Bytes=%x len=%x max_byte=%x\n", rx_bytes, len, max_bytes, 4, 5, 6);*/

    	/* If we cannot get a buffer to loan then bail out. */
    	pNewCluster = netClusterGet(pDrvCtrl->end.pNetPool, pDrvCtrl->pClPoolId);

	/*DRV_LOG (DRV_DEBUG_RX, "Cannot loan cluster!\n", 0, 0, 0, 0, 0, 0);
			END_ERR_ADD (&pDrvCtrl->end, MIB2_IN_ERRS, +1);*/


    	if (pNewCluster == NULL)
        	{
    		DRV_LOG (DRV_DEBUG_RX, "Cannot loan cluster!\n", 0, 0, 0, 0, 0, 0);
			END_ERR_ADD (&pDrvCtrl->end, MIB2_IN_ERRS, +1);
			goto cleanRXD;
        	}

    	if ((pClBlk = netClBlkGet (pDrvCtrl->end.pNetPool, M_DONTWAIT)) == NULL)
      		{
        	netClFree (pDrvCtrl->end.pNetPool, pNewCluster);
    		DRV_LOG (DRV_DEBUG_RX, "Out of Cluster Blocks!\n", 0, 0, 0, 0, 0, 0);
			END_ERR_ADD (&pDrvCtrl->end, MIB2_IN_ERRS, +1);
			goto cleanRXD;
        	}
    
    	/*
     	 * OK we've got a spare, let's get an M_BLK_ID and marry it to the
     	 * one in the ring.
     	 */

    	if ((pMblk = mBlkGet(pDrvCtrl->end.pNetPool, M_DONTWAIT, MT_DATA))
        	== NULL)
        	{
        	netClBlkFree (pDrvCtrl->end.pNetPool, pClBlk);
        	netClFree (pDrvCtrl->end.pNetPool, pNewCluster);
        	DRV_LOG (DRV_DEBUG_RX, "Out of M Blocks!\n", 0, 0, 0, 0, 0, 0);
        	END_ERR_ADD (&pDrvCtrl->end, MIB2_IN_ERRS, +1);
        	goto cleanRXD;
        	}

		/* Copy the data found into the new cluster, we have (+4) to get us past the */
		/* data that the rtl chip places at the start of the message and we remove   */
		/* the CRC from the end of the message	*/

		if ((readPtr + len) >= (pDrvCtrl->ptrRxBufSpace + RTL_RXBUFLEN))
			{
			wrapSize = (int) ((readPtr + len) - (pDrvCtrl->ptrRxBufSpace + RTL_RXBUFLEN));

			/* Copy in first section of message as stored */
			/* at the end of the ring buffer			  */


		  


    		memcpy (pNewCluster+PRO_OFFSET, readPtr + 4, len - wrapSize);

			/* Copy in end of message as stored */
			/* at the start of the ring buffer  */

		/*vicadd*/
#ifdef	CPU_PENTIUM
    		memcpy (pNewCluster +len - wrapSize -4, pDrvCtrl->ptrRxBufSpace, wrapSize+0x04);
								/* there have some error compiler's bug in this line*/
								/* If I just copy the correct bytes the last two bytes will*/
								/* have some trouble, so I copy extra bytes to fix the CPU or*/
								/* OS's bug	vic						*/						
#else
/*	memcpy (pNewCluster+PRO_OFFSET , pDrvCtrl->ptrRxBufSpace, wrapSize); */
/* modified by zm*/
	memcpy (pNewCluster+PRO_OFFSET + len - wrapSize -4, pDrvCtrl->ptrRxBufSpace, wrapSize + 0x04);
#endif
				
			cur_rx = (wrapSize + RTL_CRC_SIZE + 4 + 3) & ~3;


	





		/*DRV_LOG (DRV_DEBUG_ALL, "wrapsize=%x readptr=%x len=%x pNew=%x newwrapsize %x\n",wrapSize,readPtr,len,pNewCluster,pNewCluster-wrapSize ,6);		
		DRV_LOG (DRV_DEBUG_ALL, "header=%02x %02x %02x %02x %02x %02x \n",readPtr[4],readPtr[5],readPtr[6],readPtr[7],readPtr[8],readPtr[9]);		
		DRV_LOG (DRV_DEBUG_ALL, "newheader=%02x %02x %02x %02x %02x %02x \n",pNewCluster[0],pNewCluster[1],pNewCluster[2],pNewCluster[3],pNewCluster[4],pNewCluster[5]);*/
		/*DRV_LOG (DRV_DEBUG_ALL, "len=%02x \n",len,2, 3, 4, 5, 6);*/

			}
		else

			{
    		memcpy (pNewCluster+PRO_OFFSET, readPtr + 4, len);
			cur_rx = (cur_rx + len + RTL_CRC_SIZE + 4 + 3) & ~3;

   			}


	 	/*DRV_LOG (DRV_DEBUG_ALL, "header=%02x %02x %02x %02x %02x %02x \n",readPtr[0],readPtr[1],readPtr[2],readPtr[3],readPtr[4],readPtr[5]);		
		DRV_LOG (DRV_DEBUG_ALL, "len=%02x \n",len,2, 3, 4, 5, 6);*/

		/* Disable interrupts by clearing the interrupt mask. */
/*vicadd    	rtl81x9CsrWriteWord (pDrvCtrl, RTL_REGS_INTR_MASK, 0x00, NONE);*/

		/* We then write the CAPR as the next ptr we will read minus 0x10 which 	*/
		/* give us a little leeway to ensure that there is no overflow 				*/
		rtl81x9CsrWriteWord (pDrvCtrl, RTL_REGS_RX_BUF_PTR, (cur_rx - 16), RTL_WIN_0);
    		/*DRV_LOG (DRV_DEBUG_ALL, "CAPR=%x len=%d\n",(cur_rx - 16), len, 0, 0, 0, 0);*/
			
		/* Enable interrupts by setting the interrupt mask. */
/*vicadd    	rtl81x9CsrWriteWord (pDrvCtrl, RTL_REGS_INTR_MASK, RTL_VALID_INTERRUPTS, NONE);*/
    	
    	/* Join the cluster to the MBlock */

    	netClBlkJoin (pClBlk, pNewCluster, len, NULL, 0, 0, 0);
    			netMblkClJoin (pMblk, pClBlk);

    	/* make the packet data coherent */

    	RTL_CACHE_INVALIDATE (pMblk->mBlkHdr.mData, len);

    	pMblk->mBlkHdr.mLen   = len;
    	pMblk->mBlkHdr.mFlags |= M_PKTHDR;
    	pMblk->mBlkPktHdr.len = len;
    	pMblk->mBlkHdr.mData  += PRO_OFFSET;

    	/* Call the upper layer's receive routine. */

    	rxCountNum++;

    	DRV_LOG(DRV_DEBUG_ALL, "Rx have received %d pkt\r\n", rxCountNum, 2, 3, 4, 5, 6);

    	END_RCV_RTN_CALL (&pDrvCtrl->end, pMblk);

		}

cleanRXD:
	

    }

	  
/*******************************************************************************
*
* rtl81x9Ioctl - interface ioctl procedure
*
* Process an interface ioctl request.
*
* This routine implements the network interface control functions.
* It handles EIOCSADDR, EIOCGADDR, EIOCSFLAGS, EIOCGFLAGS, EIOCMULTIADD,
* EIOCMULTIDRTL, EIOCMULTIGET, EIOCPOLLSTART, EIOCPOLLSTOP, EIOCGMIB2 commands.
*
* RETURNS: OK if successful, otherwise EINVAL.
*/

LOCAL int rtl81x9Ioctl
    (
    RTL81X9END_DEVICE *	pDrvCtrl,
    int		cmd,
    caddr_t	data
    )
    {
    int error = 0;
    long value;

    switch (cmd)
        {
        case EIOCSADDR:
	    if (data == NULL)
		return (EINVAL);
            bcopy ((char *)data, (char *)END_HADDR(&pDrvCtrl->end),
		   END_HADDR_LEN(&pDrvCtrl->end));
            break;

        case EIOCGADDR:
	    if (data == NULL)
		return (EINVAL);
            bcopy ((char *)END_HADDR(&pDrvCtrl->end), (char *)data,
		    END_HADDR_LEN(&pDrvCtrl->end));
            break;

        case EIOCSFLAGS:
	    value = (long)data;
	    if (value < 0)
		{
		value = -value;
		value--;		/* HRTLP: WHY ??? */
		END_FLAGS_CLR (&pDrvCtrl->end, value);
		}
	    else
		{
		END_FLAGS_SET (&pDrvCtrl->end, value);
		}
	    rtl81x9Config (pDrvCtrl);
            break;
        case EIOCGFLAGS:
	    *(int *)data = END_FLAGS_GET(&pDrvCtrl->end);
            break;

	case EIOCPOLLSTART:
	    error = rtl81x9PollStart (pDrvCtrl);
	    break;

	case EIOCPOLLSTOP:
	    error = rtl81x9PollStop (pDrvCtrl);
	    break;

        case EIOCGMIB2:
            if (data == NULL)
                return (EINVAL);
            bcopy((char *)&pDrvCtrl->end.mib2Tbl, (char *)data,
                  sizeof(pDrvCtrl->end.mib2Tbl));
            break;
        case EIOCGFBUF:
            if (data == NULL)
                return (EINVAL);
            *(int *)data = RTL_MIN_FBUF;
            break;
        case EIOCGMWIDTH:
            if (data == NULL)
                return (EINVAL);
            *(int *)data = pDrvCtrl->memWidth;
            break;
        case EIOCGHDRLEN:
            if (data == NULL)
                return (EINVAL);
            *(int *)data = 14;
            break;
        default:
            error = EINVAL;
        }
    return (error);
    }


/*******************************************************************************
*
* rtl81x9Wait - wait for the command completion
*
* This function waits for the command completion
* It is possible the chip can wedge and the 'command in progress' bit may
* never clear. Hence, we wait only a finite amount of time to avoid getting
* caught in an infinite loop. Normally this delay routine would be a macro,
* but it isn't called during normal operation so we can afford to make it a
* function.
*
* RETURNS: N/A
*/

LOCAL void rtl81x9Wait
    (
    RTL81X9END_DEVICE * 	pDrvCtrl	/* device control structure */
    )
    {
    register int	ix;


    for (ix = 0; ix < RTL_TIMEOUT; ix++)
        {
        /*if ((rtl81x9CsrReadWord (pDrvCtrl, RTL_REGS_CHIP_CMD, NONE) & 0x10) == 0)*/
	if ((rtl81x9CsrReadByte (pDrvCtrl, RTL_REGS_CHIP_CMD, NONE) & 0x10) == 0)
	            break;					/*vicadd*/
	}

    if (ix == RTL_TIMEOUT)
        DRV_LOG (DRV_DEBUG_ALL, "rtl81x9Wait - rtlPci%d: command never completed!\n",
                 pDrvCtrl->unit, 2, 3, 4, 5, 6);
    return;
    }

/*******************************************************************************
*
* rtl81x9Reset - Reset the chip
*
* This routine does a soft reset on the chip.
*
* RETURNS: OK, Always. 
*/

LOCAL STATUS rtl81x9Reset
    (
    RTL81X9END_DEVICE *	pDrvCtrl	/* pointer to device control structure */
    )
    {
    /* issue the reset command */
	/*DRV_LOG (DRV_DEBUG_LOAD, " rtl81x9Reset\n",0,0,0,0,0,0);*/
    
    /*rtl81x9CsrWriteWord (pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_RESET, RTL_WIN_0);*/
    rtl81x9CsrWriteByte (pDrvCtrl, RTL_REGS_CHIP_CMD, RTL_CMD_RESET, RTL_WIN_0);	
    {
		DEBUG_LED(0X2);
		taskDelay (sysClkRateGet()/4);
	}

    rtl81x9Wait(pDrvCtrl);	/* wait for the command to complete */
   	{
		DEBUG_LED(0X7);
		taskDelay (sysClkRateGet()/4);
	}

    /* wait for a while */

    SYS_DELAY(10);/*vicadd*/
    return OK;
    }
   
/*******************************************************************************
*
* rtl81x