lcd_confdefaults.h

uCGUI

/*************************************************************************************************************
                                                   uC/GUI
                                               嵌入式通用图形软件
文    件： LCD_ConfDefaults.h
描    述： Valid LCD configuration and defaults
************************************************************************************************************/
#ifndef LCD_CONFIG_DEFAULTS_H
	#define LCD_CONFIG_DEFAULTS_H
	#include "LCDConf.H"            /* Configuration header file */
	
	/*************************************************************************************************************
	                                 Defaults for config switches--默认配置开关
	************************************************************************************************************/
	#if !defined (LCD_NUM_DISPLAYS)
	  #define LCD_NUM_DISPLAYS 1
	#endif
	
	#ifndef LCD_NUM_CONTROLLERS
	  #define LCD_NUM_CONTROLLERS (1)
	#endif
	
	#ifndef LCD_NUM_COLORS
	  #define LCD_NUM_COLORS (1L<<LCD_BITSPERPIXEL)
	#endif
	
	/*************************************************************************************************************
	*             Map the defines for controller 0 to general defines--图0为控制器的一般定义定义
	*************************************************************************************************************/
	#ifndef LCD_MIRROR_X
	  #define LCD_MIRROR_X   (0)    /* If active:  X -> -X */
	#endif
	#ifndef LCD_MIRROR_Y
	  #define LCD_MIRROR_Y   (0)    /* If active:  Y -> -Y */
	#endif
	#ifndef LCD_SWAP_XY
	  #define LCD_SWAP_XY    (0)    /* If active:  X <-> Y */
	#endif
	
	#ifndef LCD_XORG
	  #define LCD_XORG        0     /* X-origin in log.coor., usually 0 */
	#endif
	#ifndef LCD_YORG
	  #define LCD_YORG        0     /* Y-origin in log.coor., usually 0 */
	#endif
	
	/* Allow use of multiple physical lines for one logical line ...
	   Used for delta-type LCDs, where value should be 2 */
	
	#ifndef LCD_YMAG
	  #define LCD_YMAG 1
	#endif
	#ifndef LCD_XMAG
	  #define LCD_XMAG 1
	#endif
	
	#ifndef LCD_VXSIZE
	  #define LCD_VXSIZE      (LCD_XSIZE*LCD_XMAG) /* virtual x-size */
	#endif
	#ifndef LCD_VYSIZE
	  #define LCD_VYSIZE      (LCD_YSIZE*LCD_YMAG) /* virtual y-size */
	#endif
	
	#ifndef LCD_SWAP_BYTE_ORDER
	  #define LCD_SWAP_BYTE_ORDER (0)    /* only for 16 bit bus, default is not swapped */
	#endif
	
	#ifndef  LCD_MAX_LOG_COLORS
	  #define  LCD_MAX_LOG_COLORS (256)
	#endif
	
	#ifndef LCD_REVERSE
	  #define LCD_REVERSE 0
	#endif
	
	/* Optionally swap red and blue components--选择交换红蓝 */
	#ifndef LCD_SWAP_RB
	  #define LCD_SWAP_RB 0
	#endif
	
	#if !defined (LCD_CONTROLLER) && defined (LCD_CONTROLLER_0)
	  #define LCD_CONTROLLER LCD_CONTROLLER_0
	#endif
	
	#if !defined (LCD_XSIZE) && defined (LCD_XSIZE_0)
	  #define LCD_XSIZE          LCD_XSIZE_0
	#endif
	
	#if !defined (LCD_YSIZE) && defined (LCD_YSIZE_0)
	  #define LCD_YSIZE          LCD_YSIZE_0
	#endif
	
	#if !defined (LCD_BITSPERPIXEL) && defined (LCD_BITSPERPIXEL_0)
	  #define LCD_BITSPERPIXEL   LCD_BITSPERPIXEL_0
	#endif
	
	#if !defined (LCD_VYSIZE) && defined (LCD_VYSIZE_0)
	  #define LCD_VYSIZE          LCD_VYSIZE_0
	#endif
	
	/*************************************************************************************************************
	*                      Defaults for Display 0 (first display)--默认显示0（显示）
	*************************************************************************************************************/
	#ifndef LCD_MIRROR_X
	  #define LCD_MIRROR_X   (0)    /* If active:  X -> -X */
	#endif
	#ifndef LCD_MIRROR_Y
	  #define LCD_MIRROR_Y   (0)    /* If active:  Y -> -Y */
	#endif
	#ifndef LCD_SWAP_XY
	  #define LCD_SWAP_XY    (0)    /* If active:  X <-> Y */
	#endif
	
	/* Position data for controller 0 --位置数据，控制器0*/
	#ifndef LCD_XORG0
	  #define LCD_XORG0     (0)     /* leftmost position covered by this controller */
	#endif
	#ifndef LCD_YORG0
	  #define LCD_YORG0     (0)     /* topmost position covered by this controller */
	#endif
	#ifndef LCD_XSIZE0
	  #define LCD_XSIZE0    (LCD_XSIZE)   /* horizontal size covered by this controller */
	#endif
	#ifndef LCD_YSIZE0
	 #define LCD_YSIZE0    (LCD_YSIZE)   /* vertical size covered by this controller */
	#endif
	#ifndef LCD_FIRSTSEG0
	  #define LCD_FIRSTSEG0 (0)     /* first segment used by this controller */
	#endif
	#ifndef LCD_LASTSEG0
	  #define LCD_LASTSEG0    (LCD_XSIZE-1) /* Contr.0: last segment line used */
	#endif
	#ifndef LCD_FIRSTCOM0
	  #define LCD_FIRSTCOM0 (0)     /* first com used by this controller */
	#endif
	#ifndef LCD_LASTCOM0
	  #define LCD_LASTCOM0    (LCD_YSIZE-1) /* Contr.0: last com line used */
	#endif
	
	#if (!LCD_SWAP_XY)
	  #define LCD_XSIZE_PHYS  LCD_XSIZE
	  #define LCD_YSIZE_PHYS  LCD_YSIZE
	  #define LCD_VXSIZE_PHYS LCD_VXSIZE
	  #define LCD_VYSIZE_PHYS LCD_VYSIZE
	#else
	  #define LCD_XSIZE_PHYS  LCD_YSIZE
	  #define LCD_YSIZE_PHYS  LCD_XSIZE
	  #define LCD_VXSIZE_PHYS LCD_VYSIZE
	  #define LCD_VYSIZE_PHYS LCD_VXSIZE
	#endif
	
	
	/*************************************************************************************************************
	*                                         Color settings, display 0
	*************************************************************************************************************/
	#ifndef LCD_REVERSE
	  #define LCD_REVERSE 0
	#endif
	
	#ifndef LCD_REVERSE_LUT
	  #define LCD_REVERSE_LUT 0
	#endif
	
	#ifndef LCD_PHYSCOLORS_IN_RAM
	  #define LCD_PHYSCOLORS_IN_RAM 0
	#endif
	
	#if !defined (LCD_PHYSCOLORS)
	  #if   (LCD_BITSPERPIXEL == 1) | (LCD_BITSPERPIXEL == 2) | (LCD_BITSPERPIXEL == 4)
	    #ifndef LCD_FIXEDPALETTE
	      #define LCD_FIXEDPALETTE LCD_BITSPERPIXEL
	    #endif
	  #endif
	#endif /* defined (LCD_PHYSCOLORS) */
	
	#if !defined (LCD_FIXEDPALETTE)
	  #if !defined (LCD_PHYSCOLORS)
	    #if LCD_BITSPERPIXEL == 8
	      #define LCD_FIXEDPALETTE 8666
	    #elif LCD_BITSPERPIXEL == 12
	      #define LCD_FIXEDPALETTE 444
	    #elif LCD_BITSPERPIXEL == 15
	      #define LCD_FIXEDPALETTE 555
	    #elif LCD_BITSPERPIXEL == 16
	      #define LCD_FIXEDPALETTE 565
	    #else
	      #define LCD_FIXEDPALETTE 0
	    #endif
	  #else
	    #define LCD_FIXEDPALETTE 0
	  #endif
	#endif
	
	#if (LCD_BITSPERPIXEL > 8) && defined (LCD_PHYSCOLORS)
	  #error List of physical colors not permitted if more than 8 bpp are used !
	#endif
	
	#if (LCD_FIXEDPALETTE==0)
	  #if !defined(LCD_PHYSCOLORS)
	    #error You have to define a fixed palette (LCD_FIXEDPALETTE) or
	    #error the list of physical colors (LCD_PHYSCOLORS) in LCDConf.h !
	  #endif
	#endif
	
	
	/* In order to avoid warnings for undefined parameters--为了避免警告未定义参数 */
	#ifndef LCD_USE_PARA
	  #define LCD_USE_PARA(para) para=para;
	#endif
	
	#ifndef LCD_BITSPERPIXEL
	  #if LCD_BITSPERPIXEL_0 >= LCD_BITSPERPIXEL_1
	    #define LCD_BITSPERPIXEL LCD_BITSPERPIXEL_0
	  #else
	    #define LCD_BITSPERPIXEL LCD_BITSPERPIXEL_1
	  #endif
	#endif
	
	#if LCD_BITSPERPIXEL <=8
	  #define LCD_PIXELINDEX U8
	#else
	  #define LCD_PIXELINDEX U16
	#endif
	
	
	/*************************************************************************************************************
	*                                  Defaults for Display 1 (second display)
	*************************************************************************************************************/
	#if LCD_NUM_DISPLAYS > 1
	
	  #ifndef LCD_MIRROR_X_1
	    #define LCD_MIRROR_X_1   (0)    /* If active:  X -> -X */
	  #endif
	  #ifndef LCD_MIRROR_Y_1
	    #define LCD_MIRROR_Y_1   (0)    /* If active:  Y -> -Y */
	  #endif
	  #ifndef LCD_SWAP_XY_1
	    #define LCD_SWAP_XY_1    (0)    /* If active:  X <-> Y */
	  #endif
	
	  #ifndef LCD_YMAG_1
	    #define LCD_YMAG_1 1
	  #endif
	
	  #ifndef LCD_XMAG_1
	    #define LCD_XMAG_1 1
	  #endif
	
	  #ifndef LCD_VXSIZE_1
	    #define LCD_VXSIZE_1      (LCD_XSIZE_1 * LCD_XMAG_1) /* virtual x-size */
	  #endif
	
	  #ifndef LCD_VYSIZE_1
	    #define LCD_VYSIZE_1      (LCD_YSIZE_1 * LCD_YMAG_1) /* virtual y-size */
	  #endif
	
	  #ifndef LCD_NUM_COLORS_1
	    #define LCD_NUM_COLORS_1 (1L<<LCD_BITSPERPIXEL_1)
	  #endif
	
	  /* Optionally swap red and blue components */
	  #ifndef LCD_SWAP_RB_1
	    #define LCD_SWAP_RB_1 0
	  #endif
	
	  /***********************************************************************************************************
	  *
	  *       Color settings, display 0
	  *
	  ***********************************************************************************************************/
	  #ifndef LCD_REVERSE_1
	    #define LCD_REVERSE_1 0
	  #endif
	
	  #ifndef LCD_REVERSE_LUT_1
	    #define LCD_REVERSE_LUT_1 0
	  #endif
	
	  #if !defined (LCD_PHYSCOLORS_1)
	    #if   (LCD_BITSPERPIXEL_1 == 1) | (LCD_BITSPERPIXEL_1 == 2) | (LCD_BITSPERPIXEL_1 == 4)
	      #ifndef LCD_FIXEDPALETTE_1
	        #define LCD_FIXEDPALETTE_1 LCD_BITSPERPIXEL_1
	      #endif
	    #endif
	  #endif /* defined (LCD_PHYSCOLORS) */
	
	  #if !defined (LCD_FIXEDPALETTE_1)
	    #if !defined (LCD_PHYSCOLORS_1)
	      #if LCD_BITSPERPIXEL_1 == 8
	        #define LCD_FIXEDPALETTE_1 8666
	      #elif LCD_BITSPERPIXEL_1 == 15
	        #define LCD_FIXEDPALETTE_1 555
	      #elif LCD_BITSPERPIXEL_1 == 16
	        #define LCD_FIXEDPALETTE_1 565
	      #else
	        #define LCD_FIXEDPALETTE_1 0
	      #endif
	    #else
	      #define LCD_FIXEDPALETTE_1 0
	    #endif
	  #endif
	
	  #if (LCD_BITSPERPIXEL_1 > 8) && defined (LCD_PHYSCOLORS_1)
	    #error List of physical colors not permitted if more than 8 bpp are used !
	  #endif
	
	  #if (LCD_FIXEDPALETTE_1 == 0)
	    #if !defined(LCD_PHYSCOLORS_1)
	      #error You have to define a fixed palette (LCD_FIXEDPALETTE_1) or
	      #error the list of physical colors (LCD_PHYSCOLORS_1) in LCDConf.h !
	    #endif
	  #endif
	#endif   /* LCD_NUM_DISPLAYS > 1 */
	
	
#endif /* LCD_INTERN_H */